How it Works
HannStar
Loading...
HSD101PFW1-A
Product Specification
38 pgs603.67 Kb0

HannStar HSD101PFW1-A Product Specification

Download
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 1/38
Document No. DC170-005417 Revision 1.0
TO :
Date :
Customer Acceptance Specification
www.jxlcd.com
www.jxlcd.com
Model: HSD101PFW1
-A++
Accepted by:
Note:
1. Please contact HannStar Display Corp. before designing your product based on this module specification.
2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein.
Signature Date
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 2/38
Document No. DC170-005417 Revision 1.0
Record of Revisions
Rev.
1.0
Date Sub-Model
Apr., 19, 2010
www.jxlcd.com
www.jxlcd.com
A++ Tentative specification was first released
Description of change
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 3/38
Document No. DC170-005417 Revision 1.0
Contents
1.0 General description ………………………………… p.5
2.0 Absolute maximum ratings……………………………. p.6
3.0 Optical characteristics.………………………………. p.7
4.0 Block diagram ……………………………………… p.11
5.0 Interface pin connection …………………………… p.13
6.0 Electrical characteristics …………………………… p.14
7.0 Reliability test items ………………………………… p.21
8.0 Outline dimension …………………………………… p.22
9.0 Lot mark ……………………………………………... p.24
10.0 Package specification ……………………………… p.25
www.jxlcd.com
11.0 General precaution …………………………………… p.26 HSD 101PFW1-A01…………………………………………… p.28 HSD 101PFW1-A02…………………………………………… p.30 HSD 101PFW1-A03…………………………………………… p.35
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 4/38
Document No. DC170-005417 Revision 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD101PFW1-A** is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 10.1 (16:9) inch diagonally measured active display area with WSVGA (1024 horizontal by 576 vertical pixel) resolution.
1.2 Features
■ 10.1 (16:9 diagonal) inch configuration
■ One channel LVDS interface
■ 262K color by 6 bit R.G.B signal input
■ RoHS Compliance
■ Halogen Free
1.3 Applications
Mobile NB Digital Photo frame Display terminal for AV application
1.4 General information
www.jxlcd.com
www.jxlcd.com
Outline Dimension 235 x 143 x 4.9 (Typ.) mm Display area 222.72(H) x 125.28(V) mm Number of Pixel 1024 RGB (H) x 576(V) pixels Pixel pitch 0.2175(H) x 0.2175(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally white NTSC 50 % Surface treatment Anti-Glare, Hard-Coating (3H) Weight 185 (Typ.) g Back-light White LED
Power Consumption
Item Specification Unit
Logic System 1.0 (Max.) W B/L System 2.3 (Max.) W
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 5/38
Document No. DC170-005417 Revision 1.0
1.5 Mechanical Information
Module
Size
Weight
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Electrical Absolute Rating
2.1.1 TFT LCD Module
Logic Supply voltage
2.1.2 Environment Absolute Rating
Operating Temperature T Storage Temperature T
www.jxlcd.com
www.jxlcd.com
Item Min. Typ. Max. Unit Horizontal (H) 234.5 235 235.5 mm Vertical (V) 142.5 143 143.5 mm Depth (D)
Item Symbol Min. Max. Unit Note
VDD -0.3 4.0 V
Item Symbol Min. Max. Unit Note
－ －
0 50
opa
-20 60
stg
4.9 185 195 g
5.2 mm
℃ ℃
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 6/38
Document No. DC170-005417 Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
－
Contrast CR
Response time
Rising Tr Falling
Tf
400 500
－
－
2 4 6 12
(1)(2)(4)
msec
(1)(3)
White luminance (5 point)
Red
Color chromaticity
(CIE1931)
www.jxlcd.com
www.jxlcd.com
Viewing angle
Brightness uniformity B
Brightness Uniformity B
3.2 Measuring Condition
■ Measuring surrounding：dark room
■ LED current I
■ Ambient temperature：25±2oC
■ 15min. warm-up time.
Green
Blue
White
Hor.
Ver.
YL 160 200
L
CR>10
(13 points)
Θ=0
Normal viewing
angle
(5point)
Rx RY Gx
GY
Bx BY
Wx Wy
Θ Θ
R
Θ
U
Θ
D
UNI
UNI
：
20mA / signal LED
L
Θ
Θ
=0
=0
0.581
0.336
0.330
0.545
0.123
0.089
0.283
0.299 40 45 40 45 10 15 30 35
80
70
－
0.611 0.641
0.366 0.396
0.360 0.390
0.575 0.605
0.153 0.183
0.119 0.149
0.313 0.343
0.329 0.359
－ －
－ －
－
－
－
－
cd/m
(1)(4)
(IL=20mA)
% (5)
% (6)
(1)(4)(5)
2
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
o
Document Title HSD101PFW1 Standard Specification Page No. 7/38
Document No. DC170-005417 Revision 1.0
3.3 Measuring Equipment
■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics.
■ Measuring spot size：20 ~ 21 mm
Note (1) Definition of Viewing Angle:
Note (2) Definition of Contrast Ratio (CR) : measured at the center point of panel
Luminance with all pixels white CR = Luminance with all pixels black
www.jxlcd.com
www.jxlcd.com
Φ=180
Θ
L
6’ o’clock
Φ=270
Θ
D
Θ
U
12’ o’clock
Φ=90
Θ
o
o
R
Φ=0o
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 8/38
Document No. DC170-005417 Revision 1.0
Note (3) Definition of Response Time : Sum of TR and TF
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
Optical response
Note (4) Definition of optical measurement setup
www.jxlcd.com
www.jxlcd.com
10%
0%
T
F
time
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 9/38
Document No. DC170-005417 Revision 1.0
Note (5) Definition of Average Luminance Uniformity of White (5 Point)
Average Luminance Uniformity =
www.jxlcd.com
www.jxlcd.com
Y1+Y2+Y3+Y4+Y5
5
Note (6) Definition of brightness uniformity
Luminance uniformity(13points) = ×100%
The information contained in this document is the exclusive property of HannStar Display Corporation. I
Luminance uniformity(5 points) = ×100%
(Min Luminance of 5 points)
(Max Luminance of 5 points)
(Min Luminance of 13 points) (Max Luminance of 13 points)
Corporation.
HannStar Display Corp.
t shall not
(3072 Dots)
B G
LED
Document Title HSD101PFW1 Standard Specification Page No. 10/38
Document No. DC170-005417 Revision 1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module:
X-driver IC
Driver
Timing
Connector
EDID
DC/DC
Converter
Controller
+
LVDS
Receiver
Liquid Crystal Panel
1024x576 pixels
Y-driver IC
www.jxlcd.com
www.jxlcd.com
4.2 Pixel Format
The information contained in this document is the exclusive property of HannStar Display Corporation. I
1,1
2,1
576,1
1,2 1,3 1,4
Gray scale
Manipulation
Voltage
Generation
Circuit
1024 pixel
LCD Display Area
1 Pixel
R
R
R
1,1024
576,
1024
576 Lines
Corporation.
HannStar Display Corp.
t shall not
scale of
Document Title HSD101PFW1 Standard Specification Page No. 11/38
Document No. DC170-005417 Revision 1.0
4.3 Relationship Between Displayed Color and Input
Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray White &
Black
MSB LSB
Display
Black L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L H H H H H H
Green L L L L L L H H H H H H L L L L L L
Light Blue L L L L L L H H H H H H H H H H H H
Red H H H H H H L L L L L L L L L L L L Purple H H H H H H L L L L L L H H H H H H Yellow H H H H H H H H H H H H L L L L L L
White H H H H H H H H H H H H H H H H H H
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Red H H H H H H L L L L L L L L L L L L Red L63
Black L L L L L L L L L L L L L L L L L L
Dark
www.jxlcd.com
Light
Green L L L L L L H H H H H H L L L L L L Green L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
White H H H H H H H H H H H H H H H H H H White L63
R5 R4 R3 R2 R1 R0
L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L
↑ ↓
H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L L L L L L L
L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L
↑
www.jxlcd.com
↓
L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L
L L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L
↑ ↓
L L L L L L L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L
L L L L L H L L L L L H L L L L L H L L L L H L L L L L H L L L L L H L
↑ ↓
H H H H L H H H H H L H H H H H L H H H H H H L H H H H H L H H H H H L
: :
: :
: :
: :
MSB LSB G5 G 4 G3 G2 G1 G 0
: :
: :
: :
: :
MSB LSB B5 B4 B3 B2 B1 B0
: :
: :
: :
: :
Gray scale
L3…L60
L3…L60
L3…L60
L3…L60
level
-
-
-
-
-
-
-
­L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 12/38
Document No. DC170-005417 Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1
TFT LCD Module
Pin No. Signal Description
1 NC No Connection 2 VCC 3.3V Power Supply 3 VCC 3.3V Power Supply 4 V_EDID EDID 3.3V Power Supply 5 NC No Connection 6 CLK_EDID EDID Clock 7 DATA_EDID EDID Data 8 RXIN0- LVDS Signal - channel0-
9 RXIN0+ LVDS Signal+ channel0+ 10 GND Ground 11 RXIN1- Data Input channel1­12 RXIN1+ Data Input channel1+ 13 GND Ground 14 RXIN2- Data Input channel2­15 RXIN2+ Data Input channel2+ 16 GND Ground 17 RXCLKIN- Data Input CLK­18 RXCLKIN+ Data Input CLK+ 19 GND Ground
www.jxlcd.com
www.jxlcd.com
Note
20 NC No Connection 21 NC No Connection 22 GND Ground 23 NC No Connection 24 NC No Connection 25 GND Ground 26 NC No Connection 27 NC No Connection 28 GND Ground 29 NC No Connection 30 NC No Connection 31 VLED_GND LED Ground 32 VLED_GND LED Ground 33 VLED_GND LED Ground 34 NC No Connection 35 PWM PWM Signal for LED dimming control 36 LED_EN LED Enable Pin (+3V Input) 37 NC No Connection 38 VLED LED Power Supply 5-21V 39 VLED LED Power Supply 5-21V 40 VLED LED Power Supply 5-21V
：
The brightness of LCD panel could be changed by adjusting PWM
：
：：
：
CN1 (Input signal): IPEX 20455-040E-12 (IPEX or equivalent)
：
：：
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Supply Voltage
3.0v
td
Document Title HSD101PFW1 Standard Specification Page No. 13/38
Document No. DC170-005417 Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module Item Symbol
VDD 3.0 3.3 3.6 V Note (1)
Current of power supply
Inrush current
Note (1): V
When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may
VDD<2.7V , VDD dip condition should also follow the Power On/Off
www.jxlcd.com
www.jxlcd.com
DD-
momentarily become abnormal.
conditions for supply voltage.
IDD - 0.266 0.303 A
I
RUSH
dip condition:
Min. Typ. Max. Unit
VDD =3.3V、L0 pattern
Ta=25℃ fv=60Hz
- - 1.50 A Note (2)
Note
VDD
GND
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
V
V
Document Title HSD101PFW1 Standard Specification Page No. 14/38
Document No. DC170-005417 Revision 1.0
Note
www.jxlcd.com
：
(2) Power on Inrush current test circuit
：
：：
www.jxlcd.com
DD
0.9VDD
0.1VDD
0V
0.5 ms
rising time
in
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
2.5/7T
5.5/7T
Document Title HSD101PFW1 Standard Specification Page No. 15/38
Document No. DC170-005417 Revision 1.0
6.2 Switching Characteristics for LVDS Receiver
Item Symbol Min. Typ.
Max. Unit Conditions Differential Input High Threshold Vth Differential Input Low Threshold
Input Current Differential input Voltage
Common Mode Voltage Offset VCM (|VID|/2)
6.3 Bit Mapping & Interface Definition
7T
6.5/7T
4.5/7T
3.5/7T
1.5/7T
0.5/7T
RCLK
www.jxlcd.com
www.jxlcd.com
Rin0
R[2]
R[1]
R[0]
Vtl -100
I
IN
|VID|
G[0]
R[5]
－
-10
0.1
R[4]
－ － － －
1.25
100 mV
－
mV
+10 uA
0.6 V
2.4-(|VID|/2) V
R[3]
R[2]
R[1]
R[0]
VCM=1.2V
G[0]
Rin1
G[3]
G[2]
G[1]
B[1]
B[0]
G[5]
G[4]
G[3]
G[2]
G[1]
Rin2
B[4]
B[3]
B[2] DE
(VS)
(HS)
B[5]
B[4]
B[3]
B[2] DE
Pervious cycle Current cycle
Next cycle
LVDS Receiver Input Timing Definition
for 6bits LVDS input
The information contained in this document is the exclusive property of HannStar Display Corporation. I
B[1]
Corporation.
HannStar Display Corp.
t shall not
X574 X575 X576
Document Title HSD101PFW1 Standard Specification Page No. 16/38
Document No. DC170-005417 Revision 1.0
6.4 Interface Timing (DE mode)
Item Symbol Frame Rate -- 55 60 65 Hz Frame Period t1 612 625 681 line Vertical Display Time t2 576 576 576 line Vertical Blanking Time t3 36 49 105 line 1 Line Scanning Time t4 1160 1200 1252 clock Horizontal Display Time t5 1024 1024 1024 clock Horizontal Blanking Time Clock Rate t7 39 45 51.42 MHz
Timing Diagram of Interface Signal (DE mode)
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Display Corporation. I
www.jxlcd.com
t6 136 176 228 clock
Min. Typ. Max. Unit
Corporation.
HannStar Display Corp.
t shall not
0.9V
DD
0.6V
0.6V
50%
Document Title HSD101PFW1 Standard Specification Page No. 17/38
Document No. DC170-005417 Revision 1.0
6.5 Power On / Off Sequence
Power Supply
Power On
Power
Off
0.9V
DD
0.1V
DD
0V
Signal
0V
Backlight
(Recommended
www.jxlcd.com
www.jxlcd.com
TP1
TP2
TP5
)
Item Min. Typ. Max. Unit Remark TP1 0.5 -- 10 msec TP2 0 -- 50 msec TP3 0 -- 50 msec TP4 500 -- -- msec TP5 200 -- -- msec TP6 200 -- -- msec
TP3
TP6
50%
0.1V
DD
TP4
0.1V
DD
Note
：
(1) The supply voltage of the external system for the module input should be the same
：
：：
as the definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns
on before the LCD operation or the LCD truns off before the back-light turns off, the
display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
(4) TP4 should be measured after the module has been fully discharged between
power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 18/38
Document No. DC170-005417 Revision 1.0
6.6 Backlight Unit Parameter Symbol Min Typ Max Units Condition
LED Current IF -- 20 20.6 mA LED Voltage VF 3.0 3.2 3.4 Volt
P
LED Power consumption
LED Life-Time N/A 10,000 -- -- Hour
Note (1): Calculator value for reference P=IF x VF x N (LED Qty’)
Note (2): The LED lifetime defines as the estimated time to 50% degradation of final
luminous.
6.7 LED Driver
6.7.1 Absolute Maximum Ratings
Item Symbol Min. Max. Unit Note
LED Power Supply voltage LED_EN, PWM pin Voltage
www.jxlcd.com
www.jxlcd.com
6.7.2 DC Electrical Characteristics
--
LED
V
LED
VEN, V
-0.3 24 Volt
PWM
1.75 1.89
-- 5.5 Volt
Watt
Ta=25℃ Ta=25℃ Ta=25℃
Note (1) Ta=25℃ IF=20mA
Note (2)
Parameter Symbol Min Typ Max Units Remark
LED Power Supply Voltage
LED_EN High Threshold
LED_EN Low Threshold
PWM High Threshold
PWM Low Threshold
PWM Frequency PWM Duty Cycle
The information contained in this document is the exclusive property of HannStar Display Corporation. I
V
V
V
V
PWMH
V
PWML
F
LED
ENH
ENL
PWM
T
D
5.0 -- 21.0 Volt
2.0 -- -- Volt
-- -- 0.3 Volt
3.0 -- -- Volt
-- -- 0.2 Volt
--
200
10 -- -- % Note(1)
300
Hz
Corporation.
HannStar Display Corp.
t shall not
Dimming
Signal
, PWM
LED Enable
, LED_EN
0.9V
0.9V
T3
T
t
Document Title HSD101PFW1 Standard Specification Page No. 19/38
Document No. DC170-005417 Revision 1.0
Note: PWM Duty Cycle. Pulse duty the bigger the brighter.
Duty Cycle TD= (t / T) x 100%
6.7.3 LED Power on/off sequence (Only A00, A01)
LED Power Supply, V
LED
T1 T2 T4 T5
0.1V
0V
LED
0.1V
LED
www.jxlcd.com
0V
www.jxlcd.com
0V
Symbol
T1 T2 T3 T4 T5
Note: The duty of LED dimming signal should be more than 20% in T2 and T3
Min Typ Max
10 -- -­10 -- -­50 -- --
0 -- --
10 -- --
Value
Unit
ms
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
C(30min),100 cycles
100
20 40
50
Document Title HSD101PFW1 Standard Specification Page No. 20/38
Document No. DC170-005417 Revision 1.0
7.0 Reliability test items
No.
1 High Temperature Storage Ta=+60oC, 240hrs 2 Low Temperature Storage Ta=-20oC, 240hrs
High Temperature Operation Ta=+50oC, 500hrs
3
Low Temperature Operation Ta=0oC, 500hrs
4 5 Thermal Cycling Test (non operation) -20oC(30min)→+60
Vibration
6
7 Shock
Storage / Operating temperature
www.jxlcd.com
www.jxlcd.com
Note .Max wet bulb temp.=39oC
Item Conditions Remark
o
Sine Wave
1.5G, 5~500Hz, XYZ 30min/each direction Half-Sine, 200G, 2ms, ±XYZ, 1time
-40
Humidity (%)
-20
90
80
60
40
Storage Range
20
10
0
0
Temperature (oC)
Operating Range
60
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 21/38
Document No. DC170-005417 Revision 1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension (Update: 2009/4/08)
The information contained in this document is the exclusive property of HannStar Display Corporation. I
www.jxlcd.com
www.jxlcd.com
Note:
1. Model: HSD101PFW1-A00
2. Outline: 235*143*5.2(max)
3. Customer nut:4-M2(nut depth
4. General tolerance:+/-0.5mm
5. I/F connector
6.
7. Unit: mm
nit : mm
0
Cutaway view A-A[2]
Scale: 4:1
18mm-max)
Part 20455-040E-12 or equivalent User mounting torque spec: 2kgf-cm
Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 22/38
Document No. DC170-005417 Revision 1.0
8.2 Back View Outline Dimension(Update: 2009/1/16)
www.jxlcd.com
www.jxlcd.com
BM Assembly Tolerance
| A-A’ | ≤ 1 (mm)
| B-B’ | ≤ 1 (mm)
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Rev
: -
A**
EDX.X 6 A0
Document Title HSD101PFW1 Standard Specification Page No. 23/38
Document No. DC170-005417 Revision 1.0
9.0 LOT MARK
9.1 Lot Mark
1
Code 1,2,3,4,5,6: HannStar internal flow control code. Code 7: production location. Code 8: production year. Code 9: production month. Code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
Mark 1 2 3 4 5 6 7 8 9 0
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
www.jxlcd.com
9.2 Location of Lot Mark
www.jxlcd.com
(1) Location : The label is attached to the backside of the LCD module. See Product back
view. ( Section 8.0 : (2) Detail of the Mark : As attached below (3) This is subject to change without prior notice.
OUTLINE DIMENSION )
HSD101PFW1
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 24/38
Document No. DC170-005417 Revision 1.0
10.0 PACKAGE SPECIFICATION
10.1
Packing form
LCM Model LCM Qty. in the box
HSD101PFW-A
10.2 Packing assembly drawings
Inner Box Size
50 pcs/box
www.jxlcd.com
www.jxlcd.com
460 x 316 x 321
(mm)
H
Notice
HSD101PFW1-A Material Notice
Box Corrugated Paper Board
Partition/Pad Corrugated Paper Board
Corner Pad Corrugated Paper Board
ESD bag PE --
The information contained in this document is the exclusive property of HannStar Display Corporation. I
(AB Flute)
(B Flute)
(AB Flute)
Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 25/38
Document No. DC170-005417 Revision 1.0
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is
broken.
11.4 Electric Shock
www.jxlcd.com
www.jxlcd.com
11.4.1. Disconnect power supply before handling LCD module.
11.4.2. Do not pull or fold the LED cable.
11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector
or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
11.5.2. Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
11.5.3. It’s recommended to employ protection circuit for power supply.
11.6 Operation
11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.
11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 26/38
Document No. DC170-005417 Revision 1.0
11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.
11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent.
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods.
11.9 Strong Light Exposure The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
www.jxlcd.com
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
7. Unit: mm
Document Title HSD101PFW1 Standard Specification Page No. 27/38
Document No. DC170-005417 Revision 1.0
HSD101PFW1-A01
8.0 OUTLINE DIMENSION
8.1 Front view outline dimension (Update: 2009/6/3)
www.jxlcd.com
www.jxlcd.com
Note:
1. Model: HSD101PFW1-A01
2. Outline: 235*143*5.2(max)
3. Customer nut:4-M2(nut depth
4. General tolerance:+/-0.5mm
5. I/F connector
6.
Unit: mm
Cutaway view A-A[2]
Scale: 4:1
18mm-max)
Part 20455-040E-12 or equivalent User mounting torque spec: 2kgf-cm
0
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 28/38
Document No. DC170-005417 Revision 1.0
8.1 Back view outline dimension (Update: 2008/03/04)
www.jxlcd.com
www.jxlcd.com
BM Assembly Tolerance
| A-A’ | ≤ 1 (mm)
| B-B’ | ≤ 1 (mm)
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 29/38
Document No. DC170-005417 Revision 1.0
HSD101PFW1-A02
1.4 General information
Item Specification Unit Outline Dimension 235 x 143 x 4.9 (Typ.) mm Display area 222.72(H) x 125.28(V) mm Number of Pixel 1024 RGB (H) x 576(V) pixels Pixel pitch 0.2175(H) x 0.2175(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally white NTSC 50 % Surface treatment Anti-Glare, Hard-Coating (3H) Weight 185 (Typ.) g Back-light White LED
Power Consumption
Logic System 1.0 (Max.) W B/L System (2.1) (Max.) W
www.jxlcd.com
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 30/38
Document No. DC170-005417 Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1 TFT LCD Module
：
CN1 (Input signal): IPEX 20455-040E-12 (IPEX or equivalent)
：
：：
Pin No.
1 GND Ground 2 VDD Power Supply, 3.3V (typical) 3 VDD Power Supply, 3.3V (typical) 4 V_EDID 3.3V EDID power 5 NC No Connection 6 SCL EDID Clock 7 SDA EDID Data 8 Rin0- - LVDS differential data input (R0-R5,G0)
9 Rin0+ +LVDS differential data input (R0-R5,G0) 10 GND Ground 11 Rin1- - LVDS differential data input(G1-G5,B0-B1) 12 Rin1+ +LVDS differential data input (G1-G5,B0-B1) 13 GND Ground 14 Rin2- - LVDS differential data input (B2-B5,HS,VS,DE) 15 Rin2+ +LVDS differential data input (B2-B5,HS,VS,DE) 16 GND Ground 17 CIKIN- -LVDS differential clock input
www.jxlcd.com
www.jxlcd.com
18 CIKIN+ +LVDS differential clock input 19 GND Ground 20 NC No Connection 21 NC No Connection 22 GND Ground 23 NC No Connection 24 NC No Connection 25 GND Ground 26 NC No Connection 27 NC No Connection 28 GND Ground 29 VLED LED Power Supply +5V 30 VLED LED Power Supply +5V 31 VLED_GND LED Ground 32 VLED_GND LED Ground 33 VLED_GND LED Ground 34 NC No Connection 35 NC No Connection 36 NC No Connection 37 NC No Connection
The information contained in this document is the exclusive property of HannStar Display Corporation. I
Signal Description
Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 31/38
Document No. DC170-005417 Revision 1.0
38 PWM IN System PWM signal Input 39 NC No Connection
40 NC No Connection
Note
：
The brightness of LCD panel could be changed by adjusting PWM
：
：：
6.0 ELECTRICAL CHARACTERISTICS
6.7 Backlight Unit Parameter Symbol Min Typ Max Units Condition
LED Current IF -- 20 20.6 mA LED Voltage VF 3.0 3.2 3.4 Volt
P
LED Power consumption
LED Life-Time N/A 10,000 -- -- Hour
Note (1): Calculator value for reference P=IF x VF x N (LED Qty’)
Note (2): The LED lifetime defines as the estimated time to 50% degradation of final
www.jxlcd.com
www.jxlcd.com
6.7 LED Driver
6.7.1 Absolute Maximum Ratings
LED Power Supply voltage LED_EN, PWM pin Voltage
6.7.2 DC Electrical Characteristics Parameter Symbol Min Typ Max Units Remark
luminous.
Item Symbol Min. Max. Unit Note
--
LED
V
LED
VEN, V
1.54 1.68
-0.3 6 Volt
PWM
-- 5.5 Volt
Watt
Ta=25℃ Ta=25℃ Ta=25℃
Note (1) Ta=25℃ IF=20mA
Note (2)
LED Power Supply Voltage
PWM High Threshold
PWM Low Threshold
PWM Frequency PWM Duty Cycle
V
V
PWMH
V
PWML
F
LED
PWM
T
D
4.5 -- 5.5 Volt
3.0 -- -- Volt
-- -- 0.2 Volt
--
18 20 -- -- % Note(1)
22
KHz
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
M2(nut depth
7. Unit: mm
Document Title HSD101PFW1 Standard Specification Page No. 32/38
Document No. DC170-005417 Revision 1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension (Update: 2009/4/08)
www.jxlcd.com
www.jxlcd.com
nit : mm
0
Cutaway view A-A[2]
Scale: 4:1
Note:
1. Model: HSD101PFW1-A02
2. Outline: 235*143*5.2(max)
3. Customer nut:4­18mm-max)
4. General tolerance:+/-0.5mm
5. I/F connector Part 20455-040E-12 or equivalent
6.
User mounting torque spec: 2kgf-cm
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 33/38
Document No. DC170-005417 Revision 1.0
8.2 Back View Outline Dimension(Update: 2008/12/22)
www.jxlcd.com
www.jxlcd.com
BM Assembly Tolerance
| A-A’ | ≤ 1 (mm)
| B-B’ | ≤ 1 (mm)
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 34/38
Document No. DC170-005417 Revision 1.0
HSD101PFW1-A03
1.4 General information
Item Specification Unit Outline Dimension 235 x 143 x 4.9 (Typ.) mm Display area 222.72(H) x 125.28(V) mm Number of Pixel 1024 RGB (H) x 576(V) pixels Pixel pitch 0.2175(H) x 0.2175(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally white NTSC 50 % Surface treatment Anti-Glare, Hard-Coating (3H) Weight 185 (Typ.) g Back-light White LED
Power Consumption
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Display Corporation. I
www.jxlcd.com
Logic System 1.0 (Max.) W B/L System 2.1 (Max.) W
Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 35/38
Document No. DC170-005417 Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1 TFT LCD Module Pin No.
1 GND Ground 2 VCC (+)3.3V Power
3 VCC (+)3.3V Power 4 V_EDID 3.3V Power for NB
5 ADJ Adjust for LED brightness 6 CLK_EDID EDID Clock for NB
：
CN1 (Input signal): FI-XB30SL-HF10(JAE or equivalent)
：
：：
Signal Description
7 DATA_EDID EDID 8 RXIN0- LVDS Signal(-)-------channel 0
9 RXIN0+ LVDS Signal(+)-------channel 0 10 GND Ground 11 RXIN1- LVDS Signal(-)-------channel 1 12 RXIN1+ LVDS Signal(+)-------channel 1 13 GND Ground 14 RXIN2- LVDS Signal(-)-------channel 2
15 RXIN2+ LVDS Signal(+)-------channel 2 16 GND Ground
www.jxlcd.com
www.jxlcd.com
17 RXCLKIN- LVDS Clock Signal(-) 18 RXCLKIN+ LVDS Clock Signal(+) 19 GND Ground 20 NC NC
21 NC NC 22 GND Ground 23 GND Ground 24 V_LED Power Supply for LED(+)5V
25 V_LED Power Supply for LED(+)5V
Data for NB
26 V_LED Power Supply for LED(+)5V 27 NC NC 28 NC NC 29 NC NC 30 NC NC
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 36/38
Document No. DC170-005417 Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.8 Backlight Unit Parameter Symbol Min Typ Max Units Condition
LED Current IF -- 20 20.6 mA LED Voltage VF 3.0 3.2 3.4 Volt
P
LED Power consumption
LED Life-Time N/A 10,000 -- -- Hour
Note (1): Calculator value for reference P=IF x VF x N (LED Qty’)
Note (2): The LED lifetime defines as the estimated time to 50% degradation of final
luminous.
6.7 LED Driver
6.7.1 Absolute Maximum Ratings
Item Symbol Min. Max. Unit Note
LED Power Supply voltage
www.jxlcd.com
www.jxlcd.com
LED_EN, PWM pin Voltage
6.7.2 DC Electrical Characteristics Parameter Symbol Min Typ Max Units Remark
--
LED
V
LED
VEN, V
1.54 1.68
-0.3 6 Volt
PWM
-- 5.5 Volt
Watt
Ta=25℃ Ta=25℃ Ta=25℃
Note (1) Ta=25℃ IF=20mA
Note (2)
LED Power Supply Voltage
PWM High Threshold
PWM Low Threshold
PWM Frequency PWM Duty Cycle
V
V
PWMH
V
PWML
F
LED
PWM
T
D
4.5 -- 5.5 Volt
3.0 -- -- Volt
-- -- 0.2 Volt
--
18 20 -- -- % Note(1)
22
KHz
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 37/38
Document No. DC170-005417 Revision 1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension
www.jxlcd.com
www.jxlcd.com
(Update:2009/04/08)
Note:
1. Model: HSD101PFW1-A03
2. Outline: 235*143*5.2(max)
3. Customer nut:4-M2(nut depth 18mm-max)
4. General tolerance:+/-0.5mm
5. I/F connector Part FI-XB30SSRL-HF10 or equivalent
6.
User mounting torque spec: 2kgf-cm
7. Unit: mm
nit : mm
0
Cutaway view A-A[2]
Scale: 4:1
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
HannStar Display Corp.
t shall not
Document Title HSD101PFW1 Standard Specification Page No. 38/38
Document No. DC170-005417 Revision 1.0
8.2
Back View Outline Dimension
www.jxlcd.com
www.jxlcd.com
BM Assembly Tolerance
| A-A’ | ≤ 1 (mm)
| B-B’ | ≤ 1 (mm)
The information contained in this document is the exclusive property of HannStar Display Corporation. I Corporation.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use