How it Works
HannStar
Loading...
HSD100IFW4-A
Product Specification
23 pgs410.76 Kb0

HannStar HSD100IFW4-A Product Specification

Download
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 1/23
Document No. DC170-006877 Revision 1.0
TO :
Date :
Customer Acceptance Specification
Model: HSD100IFW4
-A++
www.jxlcd.com
www.jxlcd.com
Accepted by:
Signature Date
Note:
1. Please contact HannStar Display Corp. before designing your product based on this module specification.
2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein.
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 2/23
Document No. DC170-006877 Revision 1.0
Record of Revisions
Rev.
1.0
Date Sub-Model
Feb, 22, 2011
www.jxlcd.com
www.jxlcd.com
A**
Formal Product Specification was first released.
Description of change
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 3/23
Document No. DC170-006877 Revision 1.0
Contents
1.0 General description ………………………………… p.4
2.0 Absolute maximum ratings……………………………. p.5
3.0 Optical characteristics.………………………………. p.6
4.0 Block diagram ……………………………………… p.10
5.0 Interface pin connection …………………………… p.12
6.0 Electrical characteristics …………………………… p.14
7.0 Reliability test items ………………………………… p.21
8.0 Outline dimension …………………………………… p.22
9.0 Lot mark ……………………………………………... p.24
10.0 Package specification ……………………………… p.25
www.jxlcd.com
11.0 General precaution …………………………………… p.26
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 4/23
Document No. DC170-006877 Revision 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD100IFW4-A** is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 10.1 (17:10) inch diagonally measured active display area with WSVGA (1024 horizontal by 600 vertical pixel) resolution.
1.2 Features
■ 10 (17:10 diagonal) inch configuration
■ One channel LVDS interface
■ 262K color by 6 bit R.G.B signal input
■ RoHS Compliance
■ Halogen Free
1.3 Applications
Mobile NB Digital Photo frame Display terminal for AV application
1.4 General information
www.jxlcd.com
www.jxlcd.com
Item Specification Unit Outline Dimension 235 x 145.8 x 5.5 (Typ.) mm Display area 220.416(H) x 129.15(V) mm Number of Pixel 1024 RGB (H) x 600(V) pixels Pixel pitch 0.21525(H) x 0.21525(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally white Surface treatment Antiglare, Hard-Coating (3H) with EWV film Weight 235 (Typ.) g Back-light Single LED (Side-Light type) Power
Consumption
Logic System 0.5W (Max.) L0 pattern W
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 5/23
Document No. DC170-006877 Revision 1.0
1.5 Mechanical Information
Module
Size
Weight
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Electrical Absolute Rating
2.1.1 TFT LCD Module
LED Power Supply voltage Logic Supply voltage
2.1.2 Environment Absolute Rating
Operating Temperature T
www.jxlcd.com
www.jxlcd.com
Storage Temperature T
Item Min. Typ. Max. Unit Horizontal (H) 234.5 235 235.5 mm Vertical (V) 145.3 145.8 146.3 mm Depth (D)
Item Symbol Min. Max. Unit Note
V
LED
VDD -0.3 6.0 V
Item Symbol Min. Max. Unit Note
－ －
-0.3 6.0 V GND=0
0 50 ℃
opa
-20 60 ℃
stg
5.5
235
5.8 mm
252 g
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 6/23
Document No. DC170-006877 Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR
Response time
White luminance
(Center)
Rising TR
Falling T
Color chromaticity
(CIE1931)
Viewing angle
White
Hor.
Ver.
Brightness uniformity B
www.jxlcd.com
Optima View Direction
3.2 Measuring Condition
www.jxlcd.com
■ Measuring surrounding：dark room
■ LED current IL：160mA
■ Ambient temperature：25±2oC
■ 15min. warm-up time.
YL
Wx Wy
Θ
Θ
Θ
Θ
UNI
F
L
R
U
D
Θ=0
Normal viewing
angle
CR>10
Θ=0
400 500
－ －
160 200
0.260
0.280
0.310 0.360
0.330 0.380
60 70 60 70 50 60 40 50 70
12 O’clock
－ －
－
3 6 9 18
－
－ －
－
－
(1)(2)(4)
msec
2
cd/m
(1)(4)
(IL=160mA)
% (5)
(1)(3)
(1)(4)
(6)
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
o
Document Title HSD100IFW4 Standard Specification Page No. 7/23
Document No. DC170-006877 Revision 1.0
3.3 Measuring Equipment
■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics.
■ Measuring spot size：20 ~ 21 mm
Note (1) Definition of Viewing Angle:
Note (2) Definition of Contrast Ratio (CR) : measured at the center point of panel
Luminance with all pixels white CR = Luminance with all pixels black
www.jxlcd.com
www.jxlcd.com
Φ=180
Θ
L
6’ o’clock
Φ=270
Θ
D
Θ
U
12’ o’clock
Φ=90
Θ
o
o
R
Φ=0o
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 8/23
Document No. DC170-006877 Revision 1.0
Note (3) Definition of Response Time : Sum of TR and TF
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
Optical response
Note (4) Definition of optical measurement setup
www.jxlcd.com
10%
0%
www.jxlcd.com
T
F
time
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 9/23
Document No. DC170-006877 Revision 1.0
Note (5) Definition of brightness uniformity
16.67% 50.00% 83.33%
Y2 Y3 Y4
Y9 Y1 Y5
Y8 Y7 Y6
16.67%
50.00%
83.33%
www.jxlcd.com
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Di
Luminance uniformity = ×100%
Note (6)：Rubbing Direction :The different Rubbing Direction will cause the different
optima view direction.
(Min Luminance of 9 points)
(Max Luminance of 9 points)
Corporation.
HannStar Display Corp.
splay Corporation. It shall not
1024 pixel (3072 Dots)
B G
+ Timinig Controller
LED
Document Title HSD100IFW4 Standard Specification Page No. 10/23
Document No. DC170-006877 Revision 1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module:
X-driver IC +LVDS Receiver
Driver
EDID
Connector
DC/DC
Converter
Gray scale
Manipulation
Voltage
www.jxlcd.com
www.jxlcd.com
Generation
Circuit
Y-driver IC
4.2 Pixel Format
1,1
1,2 1,3 1,4
2,1
LCD Display Area
1 Pixel
R
R
600,1
R
Liquid Crystal Panel
1024x600 pixels
1,1024
600 Lines
600,
1024
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
scale of
Document Title HSD100IFW4 Standard Specification Page No. 11/23
Document No. DC170-006877 Revision 1.0
4.3 Relationship Between Displayed Color and Input
Basic color
Gray scale of Red
Gray scale of Green
Gray scale of Blue
Gray White &
Black
MSB LSB
Display
Black L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L H H H H H H
Green L L L L L L H H H H H H L L L L L L
Light Blue L L L L L L H H H H H H H H H H H H
Red H H H H H H L L L L L L L L L L L L Purple H H H H H H L L L L L L H H H H H H Yellow H H H H H H H H H H H H L L L L L L
White H H H H H H H H H H H H H H H H H H
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Red H H H H H H L L L L L L L L L L L L Red L63
Black L L L L L L L L L L L L L L L L L L
Dark
www.jxlcd.com
Light
Green L L L L L L H H H H H H L L L L L L Green L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
White H H H H H H H H H H H H H H H H H H White L63
R5 R4 R3 R2 R1 R0
L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L
↑ ↓
H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L L L L L L L
L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L L L L L L L
↑
www.jxlcd.com
↓
L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L L L L L L L
L L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L L L L H L
↑ ↓
L L L L L L L L L L L L H H H H L H L L L L L L L L L L L L H H H H H L
L L L L L H L L L L L H L L L L L H L L L L H L L L L L H L L L L L H L
↑ ↓
H H H H L H H H H H L H H H H H L H H H H H H L H H H H H L H H H H H L
: :
: :
: :
: :
MSB LSB G5 G 4 G3 G 2 G1 G0
: :
: :
: :
: :
MSB LSB B5 B 4 B3 B 2 B1 B 0
: :
: :
: :
: :
Gray scale
L3…L60
L3…L60
L3…L60
L3…L60
level
-
-
-
-
-
-
-
­L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
L0 L1 L2
L61 L62
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
NC
NC
NC
NC
NC
NC
Document Title HSD100IFW4 Standard Specification Page No. 12/23
Document No. DC170-006877 Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1
TFT LCD Module：
Pin No. Signal Description Pin No. Signal Description
1 GND Ground 2 VDD 3.3V Power 3 VDD 3.3V Power 4 V_EDID 3.3V Power for EDID 5 ADJ Adjust for LED brightness 6 CLK_EDID EDID Clock Input 7 DATA_EDID EDID Data Input 8 RXIN0- LVDS Signal - channel0-
9 RXIN0+ LVDS Signal+ channel0+ 10 GND Ground 11 RXIN1- Data Input channel1­12 RXIN1+ Data Input channel1+ 13 GND Ground 14 RXIN2- Data Input channel2­15 RXIN2+ Data Input channel2+ 16 GND Ground 17 RXCLKIN- Data Input CLK-
www.jxlcd.com
www.jxlcd.com
18 RXCLKIN+ Data Input CLK+ 19 GND Ground 20 NC 21 NC 22 GND Ground 23 GND Ground 24 VLED LED Power +5V 25 VLED LED Power +5V 26 VLED LED Power +5V 27 NC 28 NC 29 NC 30 NC
Note：：：：The brightness of LCD panel could be changed by adjusting PWM
：
CN1 (Input signal): FI-XB30SL-HF10 (JAE or equivalent)
：：
Note
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 13/23
Document No. DC170-006877 Revision 1.0
[Note]
(1) ADJ can adjust brightness to control Pin. Pulse duty the bigger the brighter.
(2) ADJ Signal=0~3.3V，，，，Operation Frequency：：：：
Dimming Range
PWM Frequency (F) Duty Cycle (Min.) Duty Cycle (Max.)
100Hz < F < 500Hz 5% 100% 500Hz < F < 20KHz 10% 100%
www.jxlcd.com
www.jxlcd.com
T
t
Duty Cycle = t / T *100%
T = 1 / F
3.3V
0V
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Voltage
Supply Voltage
Document Title HSD100IFW4 Standard Specification Page No. 14/23
Document No. DC170-006877 Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module
Item Symbol
Supply V Current of
power supply
Note ：：：：(1) The brightness of LCD panel could be changed by adjusting ADJ.
(2)
V
dip codition :
DD-
When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may
momentarily become abnormal .
V
DD
＞
.
3.0V，V
VDD 3.0 3.3 3.6 V
4.7 5.0 5.3 V
LED
IDD - 0.151 - A VDD =3.3V、L0 pattern
VDD 3.0 3.3 3.6 V
DD-
Min. Typ. Max. Unit
dip condition should be same as V
DD-turn-con
V
DD
Note
Note (2)
Note (2)
condition.
www.jxlcd.com
www.jxlcd.com
GND
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
DE
2.5/7T
5.5/7T
Document Title HSD100IFW4 Standard Specification Page No. 15/23
Document No. DC170-006877 Revision 1.0
6.2 Switching Characteristics for LVDS Receiver
Item Symbol Min. Typ.
Max. Unit Conditions Differential Input High Threshold Differential Input Low Threshold
Input Current Differential input Voltage
Common Mode Voltage Offset
6.3 Bit Mapping & Interface Definition
7T
6.5/7T
4.5/7T
3.5/7T
1.5/7T
0.5/7T
www.jxlcd.com
www.jxlcd.com
RCLK
Rin0
R[2]
R[1]
R[0]
Vth
Vtl
I
IN
|VID|
VCM (|VID|/2)
G[0]
R[5]
－
-100
-10
0.2
R[4]
－
－
－
－
－
R[3]
100 mV
mV
－
+10 uA
0.6
2.4-(|VID|/2)
R[2]
R[1]
V V
R[0]
VCM=1.2V
G[0]
Rin1
G[3]
G[2]
G[1] B[1]
B[0]
G[5]
G[4]
G[3]
G[2]
Rin2
B[4]
B[3]
B[2] DE
(VS)
(HS)
B[5]
B[4]
B[3]
Pervious cycle Current cycle
LVDS Receiver Input Timing Definition
for 6bits LVDS input
The information contained in this document is the exclusive property of HannStar Di
G[1] B[1]
B[2]
Next cycle
Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 16/23
Document No. DC170-006877 Revision 1.0
6.4 Interface Timing (DE mode)
Item Frame Rate Frame Period Vertical Display Time Vertical Blanking Time 1 Line Scanning Time Horizontal Display Time Horizontal Blanking Time Clock Rate
Timing Diagram of Interface Signal (DE mode)
Symbol
-- 55 60 65 t1 612 666 680 t2 600 600 600 t3 12 66 80 t4 1160 1356 1510 t5 1024 1024 1024 t6 136 332 486 t7 39 54.2 61.6
Min. Typ. Max.
Unit
Hz line line line
clock clock clock
MHz
www.jxlcd.com
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
V
DD(3.3V)
TP1
TP2
0V
0V
TP9
0V
Signal & Clock
TP3
TP6
0V
LED dimming, PWM
TP4 TP5
TP8
TP7
T
P10
T
P11
Document Title HSD100IFW4 Standard Specification Page No. 17/23
Document No. DC170-006877 Revision 1.0
6.5 Power On / Off Sequence
LVDS Interface
VLED(7~21V)
10%
90%
90%
10%
10%
10%
90%
90%
10%
Item Min. Typ. Max. Unit Remark
www.jxlcd.com
www.jxlcd.com
TP1 0.5 -- 10 msec TP2 0 -- 50 msec TP3 200 -- -- msec TP4 0.5 -- 10 msec TP5 10 -- -- msec TP6 10 -- -- msec TP7 0 -- 10 msec TP8 200 -- -- msec TP9 0 -- 50 msec
TP10 1 -- 10 msec
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
C(30min), 100 cycles
Document Title HSD100IFW4 Standard Specification Page No. 18/23
Document No. DC170-006877 Revision 1.0
Note：：：：(1)
The supply voltage of the external system for the module input should be the same
as the definition of VDD.
(2)
Apply the lamp volatge within the LCD operation range. When the back-light turns on before the LCD operation or the LCD truns off before the back-light turns off, the display may momentarily become white.
(3)
In case of VDD = off level, please keep the level of input signal on the low or keep a high impedance.
(4)
TP11 should be measured after the module has been fully discharged between power off and on period.
(5)
Interface signal shall not be kept at high impedance when the power is on.
(6)
The duty of LED dimming signal should be more than 20% in TP4 and TP5
(7)
PWM can adjust brightness to control Pin. Pulse duty the bigger the brighter
7.0 Reliability test items
No.
1 High Temperature Storage Ta=+60oC, 240hrs 2 Low Temperature Storage Ta=-20oC, 240hrs
www.jxlcd.com
www.jxlcd.com
High Temperature Operation Ta=+50oC, 300hrs
3
Low Temperature Operation Ta=0oC, 300hrs
4
5 High Temperature and High Humidity
(operation) 6 Thermal Cycling Test (non operation) -20oC(30min) → +60 7 Electrostatic Discharge 8 Vibration
9 Shock
10 Vibration (with carton)
11 Drop (with carton)
Note: There is no display function NG issue occurred, all the cosmetic specification is judged
before the reliability stress.
The information contained in this document is the exclusive property of HannStar Di
Item Conditions Remark
Ta=+50oC, 80%RH, 300hrs
o
±200V,200pF(0Ω) 1 time/connector
1.Random:
1.04G, 10~500Hz, XYZ, 30min/each direction
2.Sine:
1.5G, 5~500Hz, XYZ 30min/each direction
Half-Sine, 220G, 2ms, ±XYZ, 1time Random:
1.04G, 10~500Hz, XYZ,
45min/each direction Height：60 cm 1 corner, 3 edges, 6 surfaces
JIS
Z0202
Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 19/23
Document No. DC170-006877 Revision 1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension
nit : mm
www.jxlcd.com
8.2 Back View Outline Dimension
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Document Title HSD100IFW4 Standard Specification Page No. 20/23
Document No. DC170-006877 Revision 1.0
9.0 LOT MARK
9.1 Lot Mark
1
Code 1,2,3,4,5,6: HannStar internal flow control code. Code 7: production location. Code 8: production year. Code 9: production month. Code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Mark 6 7 8 9 0 1 2 3 4 5
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
www.jxlcd.com
9.2 Location of Lot Mark
www.jxlcd.com
(1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 21/23
Document No. DC170-006877 Revision 1.0
10.0 PACKAGE SPECIFICATION
10.1 Packing form
(1) Package quantity in one carton: 30 pieces. (2) Carton size: 460 mm×361 mm×321 mm.
10.2 Packing assembly drawings
www.jxlcd.com
www.jxlcd.com
HSD121PHW1-B
Box Corrugated Paper Board
Partition/Pad Corrugated Paper Board
Corner Pad Corrugated Paper Board
ESD bag PE --
Material Notice
(AB Flute)
(B Flute)
(AB Flute)
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 22/23
Document No. DC170-006877 Revision 1.0
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin.
11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is
broken.
11.4 Electric Shock
www.jxlcd.com
www.jxlcd.com
11.4.1. Disconnect power supply before handling LCD module.
11.4.2. Do not pull or fold the LED cable.
11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector
or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged.
11.5.2. Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
11.5.3. It’s recommended to employ protection circuit for power supply.
11.6 Operation
11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.
11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
The information contained in this document is the exclusive property of HannStar Di Corporation.
HannStar Display Corp.
splay Corporation. It shall not
Document Title HSD100IFW4 Standard Specification Page No. 23/23
Document No. DC170-006877 Revision 1.0
11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color fading.
11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzine or other adequate solvent.
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods.
11.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
www.jxlcd.com
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.jxlcd.com
The information contained in this document is the exclusive property of HannStar Di Corporation.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use