HannStar Display Corp.
Document Title HSD100IFW2 Formal Product Information Page No. 1/23
Document No. Revision 1.0
TO :
Date : May, 5, 2010
深耕國際有司
HannStar Product Information
(Formal)
Model: HSD100IFW2
www.jxlcd.com
www.jxlcd.com
-A00
Note: 1.Please contact HannStar Display Corp. before designing your product based on this
module specification.
2.The information contained herein is presented merely to indicate the characteristics and
performance of our products. No responsibility is assumed by HannStar for any intellectual
property claims or other problems that may result from application based on the module
described herein.
3.The mark “ A00 ” of Model means sub-model code.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 2/23
Document No. Revision 1.0
Record of Revisions
Rev.
1.0 Mar, 05, 2010
Date Sub-Model
www.jxlcd.com
www.jxlcd.com
A00
Description of change
Formal Product Information was first released
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 3/23
Document No. Revision 1.0
Contents
1.0 General description ………………………………… p.4
2.0 Absolute maximum ratings……………………………. p.5
3.0 Optical characteristics.………………………………. p.6
4.0 Block diagram ……………………………………… p.10
5.0 Interface pin connection …………………………… p.12
6.0 Electrical characteristics …………………………… p.14
7.0 Reliability test items ………………………………… p.18
8.0 Outline dimension …………………………………… p.19
9.0 Lot mark ……………………………………………... p.20
10.0 Package specification ……………………………… p.21
www.jxlcd.com
11.0 General precaution …………………………………… p.22
www.jxlcd.com
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 4/23
Document No. Revision 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD100IFW2-A00 is a color active matrix thin film
transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a
switching device. This model is composed of a TFT LCD panel, a driving circuit
and a back light system. This TFT LCD has a 10.1 (17:10) inch diagonally
measured active display area with WSVGA (1024 horizontal by 600 vertical pixel)
resolution.
1.2 Features
■ 10.1 (17:10 diagonal) inch configuration
■ One channel LVDS interface
■ 262K color by 6 bit R.G.B signal input
■ RoHS Compliance
■ Halogen Free
1.3 Applications
Mobile NB
Digital Photo frame
Display terminal for AV application
1.4 General information
www.jxlcd.com
www.jxlcd.com
Outline Dimension 235 x 145.8 x 4.8 (Typ.) mm
Display area 220.42(H) x 129.15(V) mm
Number of Pixel 1024 RGB (H) x 600(V) pixels
Pixel pitch 0.2153(H) x 0.2153(V) mm
Pixel arrangement RGB Vertical stripe
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H) with EWV film
Weight 185(typ) g
Back-light Single LED (Side-Light type)
Power
Consumption
1.5 Mechanical Information
Module
Size
Weight
Item Specification Unit
Logic System 0.7(Max.) W
B/L System 2.0(Max.) W
Item Min. Typ. Max. Unit
Horizontal (H) 234.7 235 235.3 mm
Vertical (V) 145.5 145.8 146.1 mm
Depth (D)
－
－
4.8
185 195 g
5.1 mm
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 5/23
Document No. Revision 1.0
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Electrical Absolute Rating
2.1.1 TFT LCD Module
Item Symbol Min. Max. Unit Note
LED Power Supply voltage
Logic Supply voltage
2.2 Environment Absolute Rating
Item Symbol Min. Max. Unit Note
Operating Temperature T
Storage Temperature T
V
-0.3 6.0 V GND=0
LED
VDD -0.3 6.0 V
0 50
opa
-20 60
stg
℃
℃
www.jxlcd.com
www.jxlcd.com
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 6/23
Document No. Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR
Response time
White luminance
(5 points)
Red
Color
chromaticity
(CIE1931)
Viewing
angle
www.jxlcd.com
www.jxlcd.com
Green
Blue
White
Hor.
Ver.
Tr
Tf 9 18
YL 140 180
Rx
RY
Gx
GY
Bx
BY
Wx
Wy
Θ
L
Θ
R
Θ
U
Θ
D
CR>10
Θ=0
Normal
viewing
angle
400 500
－
0.553
0.302 0.352 0.302
0.260 0.310 0.360
0.496 0.546 0.596
0.099 0.149 0.199
0.059 0.109 0.159
0.260 0.310 0.360
0.280 0.330 0.380
60 70
60 70
40
50
3 6
0.603
50
60
－
－
0.653
－
－
－
－
(1)(2)
msec
2
cd/m
(1)(3)
(1)(4)(5)
(1)(4)
Θ
Brightness uniformity B
Brightness uniformity B
3.2 Measuring Condition
■ Measuring surrounding：dark room
■ Ambient temperature：25±2oC
■ 15min. warm-up time.
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
UNI
UNI
=0
(5points)
Θ
=0
(13points)
－
－ －
－
1.25
1.5
(6)
(6)
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
o
Document Title HSD100IFW2 Formal Product Information Page No. 7/23
Document No. Revision 1.0
3.3 Measuring Equipment
■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity
and BM-5A for other optical characteristics.
■ Measuring spot size：20 ~ 21 mm
Note (1) Definition of Viewing Angle:
Note (2) Definition of Contrast Ratio (CR) :
measured at the center point of panel
Luminance with all pixels white
CR =
Luminance with all pixels black
www.jxlcd.com
www.jxlcd.com
Φ=180
Θ
L
6’ o’clock
Φ=270
Θ
D
Θ
U
12’ o’clock
Φ=90
Θ
o
o
R
Φ=0o
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 8/23
Document No. Revision 1.0
Note (3) Definition of Response Time : Sum of TR and TF
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
Optical
response
Note (4) Definition of optical measurement setup
www.jxlcd.com
www.jxlcd.com
10%
0%
T
F
time
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 9/23
Document No. Revision 1.0
Note (5) Definition of Average Luminance Uniformity of White (5 Point)
Average Luminance Uniformity =
www.jxlcd.com
www.jxlcd.com
Y1+Y2+Y3+Y4+Y5
5
Note (6) Definition of brightness uniformity
Luminance uniformity =
Luminance uniformity =
(Max Luminance of 5 points)
(Min Luminance of 5 points)
(Max Luminance of 13 points)
(Min Luminance of 13 points)
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
1024 pixel (3072 Dots)
B G
LED
Document Title HSD100IFW2 Formal Product Information Page No. 10/23
Document No. Revision 1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module:
Driver
Timing
X-driver IC
Connector
EDID
DC/DC
Converter
Controller
+
LVDS
Receiver
Liquid Crystal Panel
Y-driver IC
1024x600 pixels
www.jxlcd.com
www.jxlcd.com
Gray scale
Manipulation
Voltage
Generation
Circuit
4.2 Pixel Format
1,1
2,1
600,1
1,2 1,3 1,4
LCD Display Area
1 Pixel
R
R
R
1,1024
600,
1024
600 Lines
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
scale of
Document Title HSD100IFW2 Formal Product Information Page No. 11/23
Document No. Revision 1.0
4.3 Relationship Between Displayed Color and Input
Basic
color
Gray
scale
of Red
Gray
scale of
Green
Gray
scale of
Blue
Gray
White &
Black
MSB LSB
Display
Black L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L H H H H H H
Green L L L L L L H H H H H H L L L L L L
Light Blue L L L L L L H H H H H H H H H H H H
Red H H H H H H L L L L L L L L L L L L
Purple H H H H H H L L L L L L H H H H H H
Yellow H H H H H H H H H H H H L L L L L L
White H H H H H H H H H H H H H H H H H H
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Red H H H H H H L L L L L L L L L L L L Red L63
Black L L L L L L L L L L L L L L L L L L
Dark
www.jxlcd.com
Light
Green L L L L L L H H H H H H L L L L L L Green L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
White H H H H H H H H H H H H H H H H H H White L63
R5 R4 R3 R 2 R1 R0
L L L L L H L L L L L L L L L L L L
L L L L H L L L L L L L L L L L L L
↑
↓
H H H H L H L L L L L L L L L L L L
H H H H H L L L L L L L L L L L L L
L L L L L L L L L L L H L L L L L L
L L L L L L L L L L H L L L L L L L
↑
www.jxlcd.com
↓
L L L L L L H H H H L H L L L L L L
L L L L L L H H H H H L L L L L L L
L L L L L L L L L L L L L L L L L H
L L L L L L L L L L L L L L L L H L
↑
↓
L L L L L L L L L L L L H H H H L H
L L L L L L L L L L L L H H H H H L
L L L L L H L L L L L H L L L L L H
L L L L H L L L L L H L L L L L H L
↑
↓
H H H H L H H H H H L H H H H H L H
H H H H H L H H H H H L H H H H H L
:
:
:
:
:
:
:
:
MSB LSB
G5 G 4 G3 G2 G1 G0
:
:
:
:
:
:
:
:
MSB LSB
B5 B4 B 3 B2 B 1 B0
:
:
:
:
:
:
:
:
Gray scale
L3…L60
L3…L60
L3…L60
L3…L60
level
-
-
-
-
-
-
-
L0
L1
L2
L61
L62
L0
L1
L2
L61
L62
L0
L1
L2
L61
L62
L0
L1
L2
L61
L62
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 12/23
Document No. Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1 TFT LCD Module
Connector CN1 is used for electronics interface. The recommended model is FI-XB30SRL-HF10
manufactured by JAE or other equivalent.
Pin No. Signal Description
1 GND Ground
2 VDD Power Supply, 3.3V (typical)
3 VDD Power Supply, 3.3V (typical)
4 V_EDID EDID 3.3V power
5 ADJ Adjust for LED backlight brightness
6 CLK_EDID EDID Clock
7 DATA_EDID EDID Data
8 RXIN0- - LVDS differential data input (R0-R5, G0)
9 RXIN0+ + LVDS differential data input (R0-R5, G0)
10 GND Ground
11 RXIN1- - LVDS differential data input (G1-G5, B0-B1)
12 RXIN1+ + LVDS differential data input (G1-G5, B0-B1)
13 GND Ground
14 RXIN2- - LVDS differential data input (B2-B5, HS, VS, DE)
15 RXIN2+ + LVDS differential data input (B2-B5, HS, VS, DE)
16 GND Ground
17 RXCLKIN- - LVDS differential clock input
18 RXCLKIN+ + LVDS differential clock input
19 GND Ground
20 NC NC
www.jxlcd.com
www.jxlcd.com
21 NC NC
22 GND Ground
23 GND Ground
24 VLED LED Power Supply, 5V
25 VLED LED Power Supply, 5V
26 VLED LED Power Supply, 5V
27 NC NC
28 NC NC
29 NC NC
30 NC NC
Note
：
The brightness of LCD panel could be changed by adjusting ADJ
：
：：
：
：
：：
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 13/23
Document No. Revision 1.0
[Note]
(1) ADJ can adjust brightness to control Pin. Pulse duty the bigger the brighter.
(2) ADJ Signal=0~3.3V
Parameter Symbol
ADJ Logic-High Level V
ADJ Logic-Low Level V
Dimming Frequency F
Dimming Duty Cycle D 20 -- 100 %
www.jxlcd.com
www.jxlcd.com
，
Operation Conditions
，
，，
1.8 3.3 3.6
ADJH
0 0 0.4
ADJL
18 20 22 kHz
ADJ
：：：：
Conditions Min Typ Max Unit
V
V
t
on
T
S
D= ton / TS x 100%
F
= 1 / TS
ADJ
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Supply Voltage
3.0
v
Document Title HSD100IFW2 Formal Product Information Page No. 14/23
Document No. Revision 1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module
Item Symbol
VDD 3.0 3.3 3.6 V
V
4.7 5.0 5.3 V
LED
Current of
power supply
Note
：：：：
(1)
V
dip condition :
DD-
When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may
momentarily become abnormal .
VDD<2.7V, VDD dip condition should also follow the Power On/Off conditions for supply
voltage.
www.jxlcd.com
www.jxlcd.com
IDD - 0.192 - A VDD =3.3V、L0 pattern
Min. Typ. Max. Unit
VDD
Note
Note (1)
GND
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
DE
2.5/7T
5.5/7T
Document Title HSD100IFW2 Formal Product Information Page No. 15/23
Document No. Revision 1.0
6.2 Switching Characteristics for LVDS Receiver
Item Symbol
Min. Typ.
Max. Unit
Conditions
Differential Input High Threshold Vth
Differential Input Low Threshold Vtl -100
Input Current
Differential input Voltage
Common Mode Voltage Offset VCM (|VID|/2)
6.3 Bit Mapping & Interface Definition
7T
6.5/7T
4.5/7T
3.5/7T
1.5/7T
0.5/7T
www.jxlcd.com
RCLK
www.jxlcd.com
Rin0
R[2]
R[1]
R[0]
G[0]
I
IN
|VID|
－
－
－
-10
0.1
－
－
1.25
100 mV
－
+10 uA
0.6 V
1.8-0.4-(|VID|/2)
mV
V
VCM=1.2V
R[5]
R[4]
R[3]
R[2]
R[1]
R[0]
G[0]
Rin1
G[3]
G[2]
G[1]
B[1]
B[0]
G[5]
G[4]
G[3]
G[2]
G[1]
B[1]
Rin2
B[4]
B[3]
B[2] DE
(VS)
(HS)
B[5]
B[4]
B[3]
B[2]
Pervious cycle Current cycle
Next cycle
LVDS Receiver Input Timing Definition
for 6bits LVDS input
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 16/23
Document No. Revision 1.0
6.4 Interface Timing (DE mode)
Item Symbol Min. Typ. Max. Unit
Frame Rate
Frame Period t1 612 625 638 line
Vertical Display Time t2 600 600 600 line
Vertical Blanking Time t3 12 25 38 line
1 Line Scanning Time t4 1160 1200 1240 clock
Horizontal Display Time t5 1024 1024 1024 clock
Horizontal Blanking Time t6 136 176 216 clock
Clock Rate t7 39 45 51.42 MHz
Timing Diagram of Interface Signal (DE mode)
www.jxlcd.com
www.jxlcd.com
-- 55 60 65 Hz
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
0.9VDD
0.9VDD
Document Title HSD100IFW2 Formal Product Information Page No. 17/23
Document No. Revision 1.0
6.5 Power On / Off Sequence
Power On
Power Off
Power Supply
0V
0V
0.1V
Signal
DD
TP1
TP2
0.6V
TP5
TP3
0.6V
TP6
0.1V
DD
TP4
0.1V
DD
Backlight
(Recommended)
www.jxlcd.com
www.jxlcd.com
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec
TP2 0 -- 50 msec
TP3 0 -- 50 msec
TP4 500 -- -- msec
TP5 200 -- -- msec
TP6 200 -- -- msec
50%
50%
Note：(1) The supply voltage of the external system for the module input should be the same as the
definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the
display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a
high impedance.
(4) TP4 should be measured after the module has been fully discharged between power off
and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
C(30min),100 cycles
20 40
Document Title HSD100IFW2 Formal Product Information Page No. 18/23
Document No. Revision 1.0
7.0 Reliability test items
No.
1 High Temperature Storage Ta=+60oC, 240hrs
2 Low Temperature Storage Ta=-20oC, 240hrs
High Temperature Operation Ta=+50oC, 500hrs
3
Low Temperature Operation Ta=0oC, 500hrs
4
5 Thermal Cycling Test (non operation) -20oC(30min)→+60
Vibration
6
7 Shock
Storage / Operating temperature
www.jxlcd.com
www.jxlcd.com
-40
Note .Max wet bulb temp.=39oC
Item Conditions Remark
Humidity (%)
Storage Range
-20
100
80
60
40
10
Operating Range
0
Temperature (oC)
o
Sine Wave
1.5G, 5~500Hz, XYZ
30min/each direction
Half-Sine, 200G, 2ms, ±XYZ, 1time
50
60
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
MDL Label
Pin1
Document Title HSD100IFW2 Formal Product Information Page No. 19/23
Document No. Revision 1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension
nit : mm
www.jxlcd.com
www.jxlcd.com
8.2 Front View Outline Dimension
Conn. Typ :
FI-XB30SSRL-HF16
FI-XB30SSRL-HF16
FI-XB30SSRL-HF16FI-XB30SSRL-HF16
FI-XB30SRL-HF10
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
２
３
４
５
６
７
８
９
10
11
12
13
14
15
Document Title HSD100IFW2 Formal Product Information Page No. 20/23
Document No. Revision 1.0
9.0 LOT MARK
9.1 Lot Mark
１
Code 1,2,3,4,5,6: HannStar internal flow control code.
Code 7: production location.
Code 8: production year.
Code 9: production month.
Code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
Mark 1 2 3 4 5 6 7 8 9 0
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
www.jxlcd.com
9.2 Location of Lot Mark
www.jxlcd.com
(1) Location : The label is attached to the backside of the LCD module. See Product back
view. ( Section 8.0 :
(2) Detail of the Mark : As attached below
(3) This is subject to change without prior notice.
OUTLINE DIMENSION )
HSD100IFW2
Rev: * -A EDX.X 6 A0
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 21/23
Document No. Revision 1.0
10.0 PACKAGE SPECIFICATION
10.1 Packing form
LCM Model LCM Qty. in the box Inner Box Size (mm) Notice
HSD100IFW2-A
10.2 Packing assembly drawings
50 pcs/box 460 x 316 x 321H
www.jxlcd.com
www.jxlcd.com
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HSD100IFW2-A00 Material Notice
Box Corrugated Paper Board (AB Flute)
Partition/Pad Corrugated Paper Board (B Flute)
Corner Pad Corrugated Paper Board (AB Flute)
ESD bag PE --
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 22/23
Document No. Revision 1.0
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control
systems, military systems and any other application where performance failure could be
life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.
11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is
broken.
11.4 Electric Shock
www.jxlcd.com
www.jxlcd.com
11.4.1. Disconnect power supply before handling LCD module.
11.4.2. Do not pull or fold the LED cable.
11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector
or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.
11.5.2. Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.
11.5.3. It’s recommended to employ protection circuit for power supply.
11.6 Operation
11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.
11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW2 Formal Product Information Page No. 23/23
Document No. Revision 1.0
11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.
11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzine or other adequate solvent.
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic
discharge. Persons who handle the module should be grounded through
adequate methods.
11.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
www.jxlcd.com
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.jxlcd.com
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Loading...