HannStar HSD100IFW1-G Product Specification

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 1/23

Document No. Revision 1.0

TO :

Date : May, 12, 2010

Customer Acceptance Specification

10” Color TFT-LCD Module

Model: HSD100IFW1

-G**

www.jxlcd.com

www.jxlcd.com

Accepted by:

Signature Date

Proposed by: Technical Service Division

Signature Date

Note:

1. Please contact HannStar Display Corp. before designing your product based on this module
specification.

2. The information contained herein is presented merely to indicate the characteristics and performance
of our products. No responsibility is assumed by HannStar for any intellectual property claims or other
problems that may result from application based on the module described herein.

相關文件：

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 2/23

Document No. Revision 1.0

Record of Revisions

Rev.

1.0 May, 12, 2010

Date Sub-Model

www.jxlcd.com

www.jxlcd.com

G**

Description of change

Formal Product Specification was first released

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 3/23

Document No. Revision 1.0

Contents

1.0 General description ………………………………… p.4

2.0 Absolute maximum ratings……………………………. p.5

3.0 Optical characteristics.………………………………. p.6

4.0 Block diagram ……………………………………… p.10

5.0 Interface pin connection …………………………… p.12

6.0 Electrical characteristics …………………………… p.14

7.0 Reliability test items ………………………………… p.18

8.0 Outline dimension …………………………………… p.19

9.0 Lot mark ……………………………………………... p.20

10.0 Package specification ……………………………… p.21

11.0 General precaution …………………………………… p.22

www.jxlcd.com

www.jxlcd.com

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 4/23

Document No. Revision 1.0

1.0 GENERAL DESCRIPTION

1.1 Introduction

HannStar Display model HSD100IFW1-G** is a color active matrix thin film
transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a
switching device. This model is composed of a TFT LCD panel, a driving circuit
and a back light system. This TFT LCD has a 10.1 (17:10) inch diagonally
measured active display area with WSVGA (1024 horizontal by 600 vertical pixel)
resolution.

1.2 Features

■ 10.1 (17:10 diagonal) inch configuration

■ One channel LVDS interface

■ 16.2M color by 6 bit + FRC R.G.B signal input

■ ROHS / Halogen Free Compliance

1.3 Applications

 Mobile NB
 Digital Photo frame
 Display terminal for AV application

1.4 General information

Item Specification Unit

www.jxlcd.com

Outline Dimension 235 x 145.8 x 5.5 (Typ.) mm

www.jxlcd.com

Display area 220.416(H) x 129.15(V) mm
Number of Pixel 1024 RGB (H) x 600(V) pixels
Pixel pitch 0.21525(H) x 0.21525(V) mm
Pixel arrangement RGB Vertical stripe
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H) with EWV film
Weight 253 (Typ.) g
Back-light Single LED (Side-Light type)

Power
Consumption

1.5 Mechanical Information

Module

Size

Weight

Logic System 1.1 (Max.) W
B/L System 3.1 (Max.) W

Item Min. Typ. Max. Unit
Horizontal (H) 234.5 235 235.5 mm
Vertical (V) 145.3 145.8 146.3 mm
Depth (D)

－
－

5.5
253 270 g

5.8 mm

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 5/23

Document No. Revision 1.0

2.0 ABSOLUTE MAXIMUM RATINGS

2.1 Electrical Absolute Rating

2.1.1 TFT LCD Module

Item Symbol Min. Max. Unit Note

LED Power Supply voltage
Logic Supply voltage

2.2 Environment Absolute Rating

Item Symbol Min. Max. Unit Note
Operating Temperature T
Storage Temperature T

V

-0.3 6.0 V GND=0

LED

VDD -0.3 6.0 V

0 50

opa

-20 60

stg

℃
℃

www.jxlcd.com

www.jxlcd.com

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 6/23

Document No. Revision 1.0

3.0 OPTICAL CHARACTERISTICS

3.1 Optical specification

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast CR
Response

time
White luminance

(Center)
Color

chromaticity
(CIE1931)

Viewing
angle

Brightness uniformity B

Optima View Direction

3.2 Measuring Condition

www.jxlcd.com

www.jxlcd.com

■ Measuring surrounding：dark room

■ LED current I

■ Ambient temperature：25±2oC

■ 15min. warm-up time.

Rising TR

Falling TF

White

Hor.

Ver.

400 500

－

Θ=0

Normal

YL 200 250

Wx
Wy

Θ

Θ

Θ

Θ

UNI

：

200mA

L

L

R

U

D

viewing

angle

CR>10

Θ=0

－

0.260 0.310 0.360

0.280 0.330 0.380
60 70

60 70
40 50
50 60
70

6 O’clock

－

5 7

20 28

－

－
－

－

－

－ －

(1)(2)

msec

cd/m

% (5)

(1)(3)
(1)(4)

2

(IL=200mA)

(1)(4)

(6)

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

o

Document Title HSD100IFW1 Formal Standard Specification Page No. 7/23

Document No. Revision 1.0

3.3 Measuring Equipment

■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity
and BM-5A for other optical characteristics.

■ Measuring spot size：20 ~ 21 mm

Note (1) Definition of Viewing Angle:

Note (2) Definition of Contrast Ratio (CR) :
measured at the center point of panel

Luminance with all pixels white
CR =
Luminance with all pixels black

www.jxlcd.com

www.jxlcd.com

Φ=180

Θ

L

6’ o’clock

Φ=270

Θ

D

Θ

U

12’ o’clock

Φ=90

Θ

o

o

R

Φ=0o

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 8/23

Document No. Revision 1.0

Note (3) Definition of Response Time : Sum of TR and TF

white(TFT OFF) black (TFT ON) white(TFT OFF)

T

R

100%

90%

Optical
response

Note (4) Definition of optical measurement setup

www.jxlcd.com

www.jxlcd.com

10%

0%

T

F

time

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 9/23

Document No. Revision 1.0

Note (5) Definition of brightness uniformity

16.67% 50.00% 83.33%

Y2 Y3 Y4

Y9 Y1 Y5

Y8 Y7 Y6

16.67%

50.00%

83.33%

www.jxlcd.com

www.jxlcd.com

Luminance uniformity = ×100%

Note (6)：Rubbing Direction (The different Rubbing Direction will cause the different

optima view direction.

(Min Luminance of 9 points)
(Max Luminance of 9 points)

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

4 pixel (3072 Dots)

B G

LED

Document Title HSD100IFW1 Formal Standard Specification Page No. 10/23

Document No. Revision 1.0

4.0 BLOCK DIAGRAM

4.1 TFT LCD Module:

Driver

Timing

X-driver IC

Connector

EDID

DC/DC

Converter

Controller

+

LVDS

Receiver

Liquid Crystal Panel

Y-driver IC

1024x600 pixels

www.jxlcd.com

www.jxlcd.com

Gray scale

Manipulation

Voltage

Generation

Circuit

4.2 Pixel Format

1,1

2,1

600,1

1,2 1,3 1,4

102

LCD Display Area

1 Pixel

R

R

R

1,1024

600,

1024

600 Lines

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

H H H H H L L L L L L L L L L

H H H H H L L

Document Title HSD100IFW1 Formal Standard Specification Page No. 11/23

Document No. Revision 1.0

4.3 Relationship Between Displayed Color and Input

MSB LSB MSB LSB MSB LSB Gray scale
Display

Black L L L L L L L L L L L L L L L L L L L L L L L L

Blue L L L L L L L L L L L L L L L L H H H H H H H H

Green L L L L L L L L H H H H H H H H L L L L L L L L
Basic
color

Gray scale
of Red

Gray scale
of Green

Gray scale
of Blue

Gray scale
of White &
Black

Light Blue L L L L L L L L H H H H H H H H H H H H H H H H

Red H H H H H H H H L L L L L L L L L L L L L L L L
Purple H H H H H H H H L L L L L L L L H H H H H H H H
Yellow H H H H H H H H H H H H H H H H L L L L L L L L

White H H H H H H H H H H H H H H H H H H H H H H H H
Black L L L L L L L L L L L L L L L L L L L L L L L L

Dark L L L L L L H L L L L L L L L L L L L L L L L L

Light H H H H H H L H L L L L L L L L L L L L L L L L L253

Red H H H H H H H H L L L L L L L L L L L L L L L L Red L255

Black L L L L L L L L L L L L L L L L L L L L L L L L

Dark L L L L L L L L L L L L L L H L L L L L L L L L

www.jxlcd.com

www.jxlcd.com

Light L L L L L L L L H H H H H H L H L L L L L L L L L253

Green L L L L L L L L H H H H H H H H L L L L L L L L Green L255

Black L L L L L L L L L L L L L L L L L L L L L L L L

Dark L L L L L L L L L L L L L L L L L L L L L L H L

Light L L L L L L L L L L L L L L L L H H H H H H L H L253

Blue L L L L L L L L L L L L L L L L H H H H H H H H Blue L255

Black L L L L L L L L L L L L L L L L L L L L L L L L

Dark L L L L L L H L L L L L L L H L L L L L L L H L

Light H H H H H H L H H H H H H H L H H H H H H H L H L253

White H H H H H H H H H H H H H H H H H H H H H H H H White L255

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

L L L L L L L H L L L L L L L L L L L L L L L L

↑
↓

H H H H H H L L L L L L L L L L L L L L L L L L L252

H H H H H H H L L L L L L L L L L L L L L L L L L254

L L L L L L L L L L L L L L L H L L L L L L L L

↑
↓

L L L L L L L L H

L L L L L L L L H H H H H H H L L L L L L L L L L254

L L L L L L L L L L L L L L L L L L L L L L L H

↑
↓

L L L L L L L L L L L L L L L L H

L L L L L L L L L L L L L L L L H H H H H H H L L254

L L L L L L L H L L L L L L L H L L L L L L L H

↑
↓

H H H H H H L L H H H H H H L L H H H H H H L L L252

H H H H H H H L H H H H H H H L H H H H H H H L L254

︰

︰

︰

︰

︰

︰

︰

︰

︰

L3…L251

︰

L3…L251

︰

L3…L251

︰

L3…L251

Level

L0
L1
L2

L0
L1
L2

L252

L0
L1
L2

L252

L0
L1
L2

-

-

-

-

-

-

-

-

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

NC

NC

NC

NC

Document Title HSD100IFW1 Formal Standard Specification Page No. 12/23

Document No. Revision 1.0

5.0 INTERFACE PIN CONNECTION

5.1 TFT LCD Module

CN1 (Input signal): FI-XB30SL-HF10 (JAE or equivalent)

Pin No. Signal Description

1 GND Ground
2 VDD 3.3V Power
3 VDD 3.3V Power
4 V_EDID 3.3V Power for EDID
5 ADJ Adjust for LED brightness Note
6 CLK_EDID EDID Clock Input
7 DATA_EDID EDID Data Input
8 RXIN0- 3LVDS Signal - channel0­9 RXIN0+ LVDS Signal+ channel0+

10 GND Ground

11 RXIN1- Data Input channel1­12 RXIN1+ Data Input channel1+
13 GND Ground
14 RXIN2- Data Input channel2­15 RXIN2+ Data Input channel2+
16 GND Ground

www.jxlcd.com

www.jxlcd.com

Note

：

The brightness of LCD panel could be changed by adjusting ADJ

：

：：

17 RXCLKIN- Data Input CLK­18 RXCLKIN+ Data Input CLK+
19 GND Ground
20 RXIN3- Data Input channel3­21 RXIN3+ Data Input channel3+
22 GND Ground
23 GND Ground
24 VLED LED Power +5V
25 VLED LED Power +5V
26 VLED LED Power +5V
27 NC
28 NC
29 NC
30 NC

：

：

：：

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 13/23

Document No. Revision 1.0

[Note]
(1) ADJ can adjust brightness to control Pin. Pulse duty the bigger the brighter.

(2) ADJ Signal=0~3.3V

Parameter Symbol

ADJ Logic-High Level V

ADJ Logic-Low Level V

Dimming Frequency F

Dimming Duty Cycle D 20 -- 100 %

www.jxlcd.com

www.jxlcd.com

，

Operation Frequency

，

，，

1.8 3.3 3.6

ADJH

0 0 0.4

ADJL

18 20 22 kHz

ADJ

：：：：

Conditions Min Typ Max Unit

t

on

T

S

D= ton / TS x 100%
F

= 1 / TS

ADJ

V
V

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Supply Voltage

Document Title HSD100IFW1 Formal Standard Specification Page No. 14/23

Document No. Revision 1.0

6.0 ELECTRICAL CHARACTERISTICS

6.1 TFT LCD Module
Item Symbol

VDD 3.0 3.3 3.6 V

V

4.7 5.0 5.3 V

LED

Current of
power supply

Note

：：：：

(1)

V

dip condition :

DD-

When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may
momentarily become abnormal .

VDD<2.7V, VDD dip condition should also follow the Power On/Off conditions for supply

voltage.

www.jxlcd.com

www.jxlcd.com

IDD - 0.3 - A VDD =3.3V、L0 pattern

Min. Typ. Max. Unit

GND

Note

Note (2)

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 15/23

Document No. Revision 1.0

6.2 Switching Characteristics for LVDS Receiver

Item Symbol

Min. Typ.

Max. Unit

Conditions
Differential Input High Threshold Vth
Differential Input Low Threshold Vtl -100

Input Current
Differential input Voltage

Common Mode Voltage Offset VCM (|VID|/2)

6.3 Bit Mapping & Interface Definition

7T

6.5/7T

5.5/7T

4.5/7T

3.5/7T

www.jxlcd.com

2.5/7T

www.jxlcd.com

1.5/7T

0.5/7T

I

IN

|VID|

－

－
－

-10

0.1

－
－

1.25

100 mV

－

+10 uA

0.6 V

1.8-0.4-(|VID|/2)

mV

V

VCM=1.2V

RCLKO

RinD

RinC

G[6]

B[4]

R[7]

B[3]

R[6]

B[2]

------

B[7]

B[6]

G[7]

ENAB VSYNC HSYNC B[5]

G[6]

B[4]

R[7]

B[3]

R[6]

B[2

-----

ENAB

RinB

G[3]

G[2] G[1]

B[1] B[0] G[5] G[4] G[3]

G[2]

G[1]

B[1]

RinA

R[2]

R[1]

R[0]

G[0]

R[5]

R[4]

R[3]

R[2]

R[1] R[0]

G[0]

For 8bits LVDS input

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 16/23

Document No. Revision 1.0

6.4 Interface Timing (DE mode)

Item Symbol Min. Typ. Max. Unit
Frame Rate
Frame Period t1 612 625 638 line
Vertical Display Time t2 600 600 600 line
Vertical Blanking Time t3 12 25 38 line
1 Line Scanning Time t4 1160 1200 1240 clock
Horizontal Display Time t5 1024 1024 1024 clock
Horizontal Blanking Time t6 136 176 216 clock
Clock Rate t7 39 45 51.42 MHz

Timing Diagram of Interface Signal (DE mode)

www.jxlcd.com

www.jxlcd.com

-- 55 60 65 Hz

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

0.9VDD

0.9VDD

Document Title HSD100IFW1 Formal Standard Specification Page No. 17/23

Document No. Revision 1.0

6.5 Power On / Off Sequence

Power On

Power Off

Power Supply

0V

0V

0.1V

Signal

DD

TP1

TP2

0.6V

TP5

TP3

0.6V

TP6

0.1V

DD

TP4

0.1V

DD

Backlight

(Recommended)

www.jxlcd.com

www.jxlcd.com

Item Min. Typ. Max. Unit Remark

TP1 0.5 -- 10 msec
TP2 0 -- 50 msec
TP3 0 -- 50 msec
TP4 500 -- -- msec
TP5 200 -- -- msec
TP6 200 -- -- msec

50%

50%

Note：(1) The supply voltage of the external system for the module input should be the same as the

definition of VDD.

(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on

before the LCD operation or the LCD truns off before the back-light turns off, the
display may momentarily become white.

(3) In case of VDD = off level, please keep the level of input signal on the low or keep a

high impedance.

(4) TP4 should be measured after the module has been fully discharged between power off

and on period.

(5) Interface signal shall not be kept at high impedance when the power is on.

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

C(30min), 100 cycles

Document Title HSD100IFW1 Formal Standard Specification Page No. 18/23

Document No. Revision 1.0

7.0 Reliability test items

No. Item Conditions Remark

1 High Temperature Storage Ta=+60oC, 240hrs
2 Low Temperature Storage Ta=-20oC, 240hrs

High Temperature Operation Ta=+50oC, 500hrs

3

Low Temperature Operation Ta=0oC, 500hrs

4

5 High Temperature and High Humidity

(operation)
6 Thermal Cycling Test (non operation) -20oC(30min) → +60
7 Electrostatic Discharge
8 Vibration

9 Shock

10 Vibration (with carton)

www.jxlcd.com

11 Drop (with carton)

Note: There is no display function NG issue occurred, all the cosmetic specification is judged

www.jxlcd.com

before the reliability stress.

1.Random:

2.Sine:

Half-Sine, 220G, 2ms, ±XYZ, 1time
Random:

Height：60 cm
1 corner, 3 edges, 6 surfaces

Ta=+50oC, 80%RH, 500hrs

o

±

200V,200pF(0Ω) 1 time/connector

1.04G, 10~500Hz, XYZ,
30min/each direction

1.5G, 5~500Hz, XYZ
30min/each direction

1.04G, 10~500Hz, XYZ,
45min/each direction

JIS Z0202

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 19/23

Document No. Revision 1.0

8.0 OUTLINE DIMENSION

8.1 Outline Dimension

nit : mm

www.jxlcd.com

www.jxlcd.com

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

２

３

４

５

６

７

８

９

10

11

12

13

14

15

Rev

: -G**

Document Title HSD100IFW1 Formal Standard Specification Page No. 20/23

Document No. Revision 1.0

9.0 LOT MARK

9.1 Lot Mark

１

Code 1,2,3,4,5,6: HannStar internal flow control code.
Code 7: production location.
Code 8: production year.
Code 9: production month.
Code 10,11,12,13,14,15: serial number.

Note (1) Production Year: Code 8 is defined by the last number of the year, for example

Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010

Mark 1 2 3 4 5 6 7 8 9 0

Note (2) Production Month

Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.

Mark 1 2 3 4 5 6 7 8 9 A B C

www.jxlcd.com

9.2

www.jxlcd.com

Detail of Lot Mark

(1) Below label is attached on the backside of the LCD module. See Section 8.0:

Dimension.

(2) The detail of Lot Mark is attached as below.
(3) This is subject to change without prior notice.

HSD100XIFW1

EDX.X 6 A0

Outline

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 21/23

Document No. Revision 1.0

10.0 PACKAGE SPECIFICATION

10.1 Packing form

(1) Package quantity in one carton: 50 pieces.
(2) Carton size: 460 mm×361 mm×321 mm.

10.2

Packing assembly drawings

www.jxlcd.com

www.jxlcd.com

Material Notice

Box Corrugated Paper Board

Partition/Pad Corrugated Paper Board

Corner Pad Corrugated Paper Board

ESD bag PE

(AB Flute)

(B Flute)

(AB Flute)

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 22/23

Document No. Revision 1.0

11.0 GENERAL PRECAUTION

11.1 Use Restriction

This product is not authorized for use in life supporting systems, aircraft navigation control
systems, military systems and any other application where performance failure could be
life-threatening or otherwise catastrophic.

11.2 Disassembling or Modification

Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.

11.3 Breakage of LCD Panel

11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.

11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.

11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and

rinse thoroughly with water.

11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is

broken.

11.4 Electric Shock

www.jxlcd.com

www.jxlcd.com

11.4.1. Disconnect power supply before handling LCD module.

11.4.2. Do not pull or fold the LED cable.

11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector

or cables in order to prevent electric shock.

11.5 Absolute Maximum Ratings and Power Protection Circuit

11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.

11.5.2. Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.

11.5.3. It’s recommended to employ protection circuit for power supply.

11.6 Operation

11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.

11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.

11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be

Document Title HSD100IFW1 Formal Standard Specification Page No. 23/23

Document No. Revision 1.0

11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops

contact with polarizer for a long time, they may causes deformation or color
fading.

11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little

petroleum benzine or other adequate solvent.

11.7 Mechanism

Please mount LCD module by using mounting holes arranged in four corners tightly.

11.8 Static Electricity

11.8.1 Protection film must remove very slowly from the surface of LCD module to

prevent from electrostatic occurrence.

11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is

very weak to electrostatic discharge. Please be careful with electrostatic
discharge. Persons who handle the module should be grounded through
adequate methods.

11.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,

display characteristics may be changed.

www.jxlcd.com

11.10 Disposal

When disposing LCD module, obey the local environmental regulations.

www.jxlcd.com

disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.