HannStar Display Corp.
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
TO :
Date : Mar,04, 2009
Customer Acceptance Specification
1/23
Model : HSD100IFW1
-A01
www.jxlcd.com
www.jxlcd.com
Accepted by:
Proposed by: Technical Service Division
Signature Date
Note:1. Please contact HannStar Display Corp. before designing your product based
on this module specification.
2.The information contained herein is presented merely to indicate the characteristics and
performance of our products. No responsibility is assumed by HannStar for any
intellectual property claims or other problems that may result from application based
on the module described herein.
Signature Date
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
Record of Revisions
Rev.
1.0 Mar,04,2009
Date Sub-Model
- Preliminary Product Specification was first released.
Description of change
2/23
www.jxlcd.com
www.jxlcd.com
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
Contents
1.0 General description ………………………………… p.4
2.0 Absolute maximum ratings……………………………. p.5
3.0 Optical characteristics.………………………………. p.6
4.0 Block diagram ……………………………………… p.10
5.0 Interface pin connection …………………………… p.12
6.0 Electrical characteristics …………………………… p.14
7.0 Reliability test items ………………………………… p.18
8.0 Outline dimension …………………………………… p.19
3/23
9.0 Lot mark ……………………………………………... p.20
10.0 Package specification ……………………………… p.21
11.0 General precaution …………………………………… p.22
www.jxlcd.com
www.jxlcd.com
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD100IFW1-A is a color active matrix thin film transistor
(TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching
device. This model is composed of a TFT LCD panel, a driving circuit and a back
light system. This TFT LCD has a 10.1 (17:10) inch diagonally measured active
display area with WSVGA (1024 horizontal by 600 vertical pixel) resolution.
1.2 Features
■ 10.1 (17:10 diagonal) inch configuration
■ One channel LVDS interface
■ 262K color by 6 bit R.G.B signal input
■ RoHS / Halogen Free Compliance
1.3 Applications
Mobile NB
Digital Photo frame
Display terminal for AV application
1.4 General information
Item Specification Unit
Outline Dimension 235 x 145.8 x 5.5 (Typ.) mm
www.jxlcd.com
www.jxlcd.com
Display area 220.416(H) x 129.15(V) mm
Number of Pixel 1024 RGB (H) x 600(V) pixels
Pixel pitch 0.21525(H) x 0.21525(V) mm
Pixel arrangement RGB Vertical stripe
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H) with EWV film
Weight 253 (Typ.) g
Back-light Single LED (Side-Light type)
Power
Consumption
1.5 Mechanical Information
Module
Size
Weight
Logic System 1.1 (Max.) W
B/L System 3.1 (Max.) W
Item Min. Typ. Max. Unit
Horizontal (H) 234.5 235 235.5 mm
Vertical (V) 145.3 145.8 146.3 mm
Depth (D)
－
－
5.5
253 270 g
5.8 mm
4/23
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Electrical Absolute Rating
2.1.1 TFT LCD Module
Item Symbol Min. Max. Unit Note
LED Power Supply voltage
Logic Supply voltage
2.2 Environment Absolute Rating
Item Symbol Min. Max. Unit Note
Operating Temperature T
Storage Temperature T
V
-0.3 6.0 V GND=0
LED
VDD -0.3 6.0 V
0 50
opa
-20 60
stg
℃
℃
5/23
www.jxlcd.com
www.jxlcd.com
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast CR
Response
time
White luminance
(Center)
Color
chromaticity
(CIE1931)
Viewing
angle
Rising TR
Falling TF
YL
Wx
White
Wy
Θ
Hor.
Θ
Θ
Ver.
Θ
L
R
U
D
CR>10
Θ=0
Normal
viewing
angle
400 500
－
－
200 250
0.260
0.280
60 70
60 70
40 50
50 60
0.310 0.360
0.330 0.380
5 7
20 28
－
－
－
－
－
－
(1)(2)
msec
cd/m
(1)(3)
(1)(4)
2
(IL=200mA)
(1)(4)
6/23
Brightness uniformity B
Optima View Direction
3.2 Measuring Condition
www.jxlcd.com
www.jxlcd.com
■ Measuring surrounding：dark room
■ LED current I
■ Ambient temperature：25±2oC
■ 15min. warm-up time.
：
200mA
L
UNI
Θ=0
70
6 O’clock
－ －
% (5)
(6)
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
o
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
3.3 Measuring Equipment
■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity
and BM-5A for other optical characteristics.
■ Measuring spot size：20 ~ 21 mm
Note (1) Definition of Viewing Angle:
Note (2) Definition of Contrast Ratio (CR) :
measured at the center point of panel
Luminance with all pixels white
CR =
Luminance with all pixels black
www.jxlcd.com
www.jxlcd.com
Φ=180
Θ
L
6’ o’clock
Φ=270
Θ
D
Θ
U
12’ o’clock
Φ=90
Θ
o
o
R
Φ=0o
7/23
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
Note (3) Definition of Response Time : Sum of TR and TF
white(TFT OFF) black (TFT ON) white(TFT OFF)
T
R
100%
90%
Optical
response
Note (4) Definition of optical measurement setup
www.jxlcd.com
www.jxlcd.com
10%
0%
T
F
time
8/23
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
Note (5) Definition of brightness uniformity
16.67% 50.00% 83.33%
Y2 Y3 Y4
Y9 Y1 Y5
16.67%
50.00%
9/23
Y8 Y7 Y6
www.jxlcd.com
www.jxlcd.com
Luminance uniformity = ×100%
Note (6)：Rubbing Direction (The different Rubbing Direction will cause the different
optima view direction.
(Min Luminance of 9 points)
(Max Luminance of 9 points)
83.33%
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
1024 pixel (3072 Dots)
B G
LED
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module:
Driver
Connector
EDID
DC/DC
Converter
Timing
Controller
+
LVDS
Receiver
Y-driver IC
X-driver IC
Liquid Crystal Panel
1024x600 pixels
www.jxlcd.com
www.jxlcd.com
4.2 Pixel Format
1,1
2,1
600,1
1,2 1,3 1,4
Gray scale
Manipulation
Voltage
Generation
Circuit
LCD Display Area
1 Pixel
R
R
R
1,1024
600,
1024
600 Lines
10/23
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
scale of
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
11/23
Document No. Revision 1.0
4.3 Relationship Between Displayed Color and Input
Basic
color
Gray
scale
of Red
Gray
scale of
Green
Gray
scale of
Blue
Gray
White &
Black
MSB LSB
Display
Black L L L L L L L L L L L L L L L L L L
Blue L L L L L L L L L L L L H H H H H H
Green L L L L L L H H H H H H L L L L L L
Light Blue L L L L L L H H H H H H H H H H H H
Red H H H H H H L L L L L L L L L L L L
Purple H H H H H H L L L L L L H H H H H H
Yellow H H H H H H H H H H H H L L L L L L
White H H H H H H H H H H H H H H H H H H
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Red H H H H H H L L L L L L L L L L L L Red L63
Black L L L L L L L L L L L L L L L L L L
Dark
www.jxlcd.com
Light
Green L L L L L L H H H H H H L L L L L L Green L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black L L L L L L L L L L L L L L L L L L
Dark
Light
White H H H H H H H H H H H H H H H H H H White L63
R5 R4 R3 R2 R1 R0
L L L L L H L L L L L L L L L L L L
L L L L H L L L L L L L L L L L L L
↑
↓
H H H H L H L L L L L L L L L L L L
H H H H H L L L L L L L L L L L L L
L L L L L L L L L L L H L L L L L L
L L L L L L L L L L H L L L L L L L
↑
www.jxlcd.com
↓
L L L L L L H H H H L H L L L L L L
L L L L L L H H H H H L L L L L L L
L L L L L L L L L L L L L L L L L H
L L L L L L L L L L L L L L L L H L
↑
↓
L L L L L L L L L L L L H H H H L H
L L L L L L L L L L L L H H H H H L
L L L L L H L L L L L H L L L L L H
L L L L H L L L L L H L L L L L H L
↑
↓
H H H H L H H H H H L H H H H H L H
H H H H H L H H H H H L H H H H H L
:
:
:
:
:
:
:
:
MSB LSB
G5 G4 G3 G2 G1 G0
:
:
:
:
:
:
:
:
MSB LSB
B5 B4 B3 B2 B1 B0
:
:
:
:
:
:
:
:
Gray scale
L3…L60
L3…L60
L3…L60
L3…L60
level
-
-
-
-
-
-
-
L0
L1
L2
L61
L62
L0
L1
L2
L61
L62
L0
L1
L2
L61
L62
L0
L1
L2
L61
L62
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
NC
NC
NC
NC
NC
NC
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
5.0 INTERFACE PIN CONNECTION
5.1 TFT LCD Module
CN1 (Input signal): FI-XB30SL-HF10 (JAE or equivalent)
Pin No. Signal Description
1 GND Ground
2 VDD 3.3V Power
3 VDD 3.3V Power
4 V_EDID 3.3V Power for EDID
5 ADJ Adjust for LED brightness Note
6 CLK_EDID EDID Clock Input
7 DATA_EDID EDID Data Input
8 RXIN0- LVDS Signal - channel0-
9 RXIN0+ LVDS Signal+ channel0+
10 GND Ground
11 RXIN1- Data Input channel112 RXIN1+ Data Input channel1+
13 GND Ground
14 RXIN2- Data Input channel215 RXIN2+ Data Input channel2+
16 GND Ground
www.jxlcd.com
www.jxlcd.com
Note
：
The brightness of LCD panel could be changed by adjusting ADJ
：
：：
17 RXCLKIN- Data Input CLK18 RXCLKIN+ Data Input CLK+
19 GND Ground
20 NC
21 NC
22 GND Ground
23 GND Ground
24 VLED LED Power +5V
25 VLED LED Power +5V
26 VLED LED Power +5V
27 NC
28 NC
29 NC
30 NC
：
：
：：
12/23
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
[Note]
(1) ADJ can adjust brightness to control Pin. Pulse duty the bigger the brighter.
13/23
(2) ADJ Signal=0~3.3V
PWM Frequency (F) Duty Cycle (Min.) Duty Cycle (Max.)
100Hz < F < 500Hz 5% 100%
500Hz < F < 20KHz 10% 100%
www.jxlcd.com
Duty Cycle = t / T *100%
www.jxlcd.com
，
Operation Frequency
，
，，
Dimming Range
：：：：
3.3V
0V
T
t
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Supply Voltage
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
14/23
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module
Item Symbol
VDD 3.0 3.3 3.6 V
V
4.7 5.0 5.3 V
LED
Current of
power supply
Note
：：：：
(1)
V
dip condition :
DD-
When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may
momentarily become abnormal .
VDD<2.7V, VDD dip condition should also follow the Power On/Off conditions for supply
voltage.
www.jxlcd.com
www.jxlcd.com
IDD - 0.3 - A VDD =3.3V、L0 pattern
Min. Typ. Max. Unit
GND
Note
Note (2)
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
DE
2.5/7T
5.5/7T
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
15/23
Document No. Revision 1.0
6.2 Switching Characteristics for LVDS Receiver
Item Symbol
Differential Input High Threshold Vth
Differential Input Low Threshold Vtl -100
Input Current
Differential input Voltage
Common Mode Voltage Offset VCM (|VID|/2)
I
IN
|VID|
Min. Typ.
－
－
－
-10
0.1
－
－
1.25
Max. Unit
100 mV
－
+10 uA
0.6 V
1.8-0.4-(|VID|/2)
Conditions
VCM=1.2V
mV
V
6.3 Bit Mapping & Interface Definition
R[5]
R[4]
R[3]
R[2]
R[1]
R[0]
7T
6.5/7T
4.5/7T
3.5/7T
1.5/7T
0.5/7T
www.jxlcd.com
RCLK
www.jxlcd.com
Rin0
R[2]
R[1]
R[0]
G[0]
G[0]
Rin1
G[3]
G[2]
G[1] B[1]
B[0]
G[5]
G[4]
G[3]
G[2]
G[1] B[1]
Rin2
B[4]
B[3]
B[2] DE
(VS)
(HS)
B[5]
B[4]
B[3]
B[2]
Pervious cycle Current cycle
Next cycle
LVDS Receiver Input Timing Definition
for 6bits LVDS input
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
6.4 Interface Timing (DE mode)
Item Symbol Min. Typ. Max. Unit
Frame Rate
Frame Period t1 612 625 638 line
Vertical Display Time t2 600 600 600 line
Vertical Blanking Time t3 12 25 38 line
1 Line Scanning Time t4 1160 1200 1240 clock
Horizontal Display Time t5 1024 1024 1024 clock
Horizontal Blanking Time t6 136 176 216 clock
Clock Rate t7 39 45 51.42 MHz
Timing Diagram of Interface Signal (DE mode)
www.jxlcd.com
www.jxlcd.com
-- 55 60 65 Hz
16/23
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
0.9VDD
0.9VDD
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
6.5 Power On / Off Sequence
Power On
Power Off
17/23
Power Supply
0V
0V
0.1V
Signal
DD
TP1
TP2
0.6V
TP3
0.6V
0.1V
DD
TP4
0.1V
DD
TP5
TP6
Backlight
(Recommended)
www.jxlcd.com
www.jxlcd.com
Item Min. Typ. Max. Unit Remark
TP1 0.5 -- 10 msec
TP2 0 -- 50 msec
TP3 0 -- 50 msec
TP4 500 -- -- msec
TP5 200 -- -- msec
TP6 200 -- -- msec
Note：(1) The supply voltage of the external system for the module input should be the same as the
definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD truns off before the back-light turns off, the display
may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or keep a high
50%
50%
impedance.
(4) TP4 should be measured after the module has been fully discharged between power off
and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
C(30min), 100 cycles
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
18/23
7.0 Reliability test items
No. Item Conditions Remark
1 High Temperature Storage Ta=+60oC, 240hrs
2 Low Temperature Storage Ta=-20oC, 240hrs
High Temperature Operation Ta=+50oC, 500hrs
3
Low Temperature Operation Ta=0oC, 500hrs
4
5 High Temperature and High Humidity
(operation)
6 Thermal Cycling Test (non operation) -20oC(30min) → +60
7 Electrostatic Discharge
8 Vibration
9 Shock
10 Vibration (with carton)
www.jxlcd.com
11 Drop (with carton)
Note: There is no display function NG issue occurred, all the cosmetic specification is judged
www.jxlcd.com
before the reliability stress.
1.Random:
2.Sine:
Half-Sine, 220G, 2ms, ±XYZ, 1time
Random:
Height：60 cm
1 corner, 3 edges, 6 surfaces
Ta=+50oC, 80%RH, 500hrs
o
±
200V,200pF(0Ω) 1 time/connector
1.04G, 10~500Hz, XYZ,
30min/each direction
1.5G, 5~500Hz, XYZ
30min/each direction
1.04G, 10~500Hz, XYZ,
45min/each direction
JIS Z0202
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
8.0 OUTLINE DIMENSION
8.1 Outline Dimension
nit : mm
19/23
www.jxlcd.com
www.jxlcd.com
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
10
11
12
13
14
15
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
9.0 LOT MARK
9.1 Lot Mark
１
２
３
４
５
６
７
８
９
Code 1,2,3,4,5,6: HannStar internal flow control code.
Code 7: production location.
Code 8: production year.
Code 9: production month.
Code 10,11,12,13,14,15: serial number.
Note (1) Production Year: Code 8 is defined by the last number of the year, for example
Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
Mark 1 2 3 4 5 6 7 8 9 0
20/23
Note (2) Production Month
Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
Mark 1 2 3 4 5 6 7 8 9 A B C
www.jxlcd.com
9.2
www.jxlcd.com
Detail of Lot Mark
(1) Below label is attached on the backside of the LCD module. See Section 8.0:
Dimension.
(2) The detail of Lot Mark is attached as below.
(3) This is subject to change without prior notice.
HSD100IFW1
Rev: * -A
EDX.X 6 A0
Outline
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
21/23
10.0 PACKAGE SPECIFICATION
10.1 Packing form
(1) Package quantity in one carton: 50 pieces.
(2) Carton size: 460 mm×361 mm×321 mm.
10.2
Packing assembly drawings
www.jxlcd.com
www.jxlcd.com
Material Notice
Box Corrugated Paper Board
Partition/Pad Corrugated Paper Board
Corner Pad Corrugated Paper Board
ESD bag PE
(AB Flute)
(B Flute)
(AB Flute)
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control
systems, military systems and any other application where performance failure could be
life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.
11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is
broken.
11.4 Electric Shock
www.jxlcd.com
www.jxlcd.com
11.4.1. Disconnect power supply before handling LCD module.
11.4.2. Do not pull or fold the LED cable.
11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector
or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.
11.5.2. Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.
11.5.3. It’s recommended to employ protection circuit for power supply.
22/23
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
Document Title HSD100IFW1-A00 Specification For Commax(HK) Page No.
Document No. Revision 1.0
11.6 Operation
11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.
11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.
11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact
with polarizer for a long time, they may causes deformation or color fading.
11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzine or other adequate solvent.
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very
weak to electrostatic discharge. Please be careful with electrostatic discharge.
Persons who handle the module should be grounded through adequate methods.
www.jxlcd.com
11.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
www.jxlcd.com
23/23
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Loading...