HannStar HSD089IFW1-A Product Specification

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 1/27

Document No. Revision 5.4

TO :

Date : Oct., 20 , 2009

HannStar Product Specification

(Formal)

8.9” Color TFT-LCD Module

www.jxlcd.com

www.jxlcd.com

Note: 1.Please contact HannStar Display Corp. before designing your product based on this

module specification.

2.The information contained herein is presented merely to indicate the characteristics and
performance of our products. No responsibility is assumed by HannStar for any intellectual
property claims or other problems that may result from application based on the module
described herein.

3.The mark “ ** ” of Model means sub-model code.

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

Model: HSD089IFW1

-A**

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 2/27

Document No. Revision 5.4

Record of Revisions

Rev.

1.0

Date Sub-Model

May, 22, 2008

www.jxlcd.com

www.jxlcd.com

-

-

-

-

-

-

-

-

-

Formal Product Specification was first released.

Description of change

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 3/27

Document No. Revision 5.4

Contents

1.0 General description ………………………………… p.4

2.0 Absolute maximum ratings……………………………. p.5

3.0 Optical characteristics ……………………………… p.6

4.0 Block diagram ……………………………………… p.10

5.0 Interface pin connection …………………………… p.12

6.0 Electrical characteristics …………………………… p.14

7.0 Reliability test items ………………………………… p.18

8.0 Outline dimension …………………………………… p.19

9.0 Lot mark ……………………………………………... p.21

10.0 Package specification ……………………………… p.22

www.jxlcd.com

11.0 General precaution …………………………………… p.23

HSD089IFW1-A02……………………………………………. p.26
For specific customer revision (Samsung Only). … p.27

www.jxlcd.com

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 4/27

Document No. Revision 5.4

1.0 GENERAL DESCRIPTION

1.1 Introduction

HannStar Display model HSD089IFW1-A is a color active matrix thin film transistor
(TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching
device. This model is composed of a TFT LCD panel, a driving circuit and a back
light system. This TFT LCD has a 8.9 (17:10) inch diagonally measured active
display area with WSVGA (1024 horizontal by 600 vertical pixel) resolution.

1.2 Features

■ 8.9 (17:10 diagonal) inch configuration

■ One channel LVDS interface

■ 262K color by 6 bit R.G.B signal input

■ RoHS / Halogen Free Compliance

1.3 Applications

 Mobile NB
 Digital Photo frame
 Display terminal for AV application

1.4 General information

Item Specification Unit

Outline Dimension 213.36x 129.55 x 5.15 (Typ.) mm

www.jxlcd.com

www.jxlcd.com

Display area 195.072(H) x 113.4(V) mm
Number of Pixel 1024 RGB(H) x600(V) pixels
Pixel pitch 190.5(H) x 189(V) mm
Pixel arrangement RGB Vertical stripe
Display mode Normally white
Surface treatment Antiglare, Hard-Coating (3H) with EWV film
Weight 200 (Typ.) g
Back-light Single LED (Side-Light type)

Power
Consumption

1.5 Mechanical Information

Module

Size

Weight

Logic System 0.95 (Max.) W
B/L System 2.1 (Max.) W

Item Min. Typ. Max. Unit
Horizontal (H) 213.06
Vertical (V) 129.25
Depth (D)

－
－

213.36

129.55

5.15
200 215 g

213.66

129.85

5.45 mm

mm
mm

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 5/27

Document No. Revision 5.4

2.0 ABSOLUTE MAXIMUM RATINGS

2.1 Electrical Absolute Rating

2.1.1 TFT LCD Module

Item Symbol Min. Max. Unit Note

LED Power Supply voltage
Logic Supply voltage

2.2 Environment Absolute Rating

Item Symbol Min. Max. Unit Note
Operating Temperature T
Storage Temperature T

V

-0.3 6.0 V GND=0

LED

VDD -0.3 6.0 V

0 50

opa

-20 60

stg

℃
℃

www.jxlcd.com

www.jxlcd.com

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 6/27

Document No. Revision 5.4

3.0 OPTICAL CHARACTERISTICS

3.1 Optical specification

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast CR
Response

time
White luminance

(Center)
Color

chromaticity
(CIE1931)

Viewing
angle

Brightness uniformity B

Optima View Direction

3.2 Measuring Condition

www.jxlcd.com

www.jxlcd.com

■ Measuring surrounding：dark room

■ LED current I

■ Ambient temperature：25±2oC

■ 15min. warm-up time.

Rising TR

Falling TF

White

Hor.

Ver.

：

150mA

L

YL

Wx
Wy

Θ

Θ

Θ

Θ

UNI

L

R

U

D

Θ=0

Normal
viewing

angle

CR>10

Θ=0

400 500

－
－

180 220

0.260

0.280
60 70

60 70
40 50
50 60
70

6 O’clock

0.310 0.360

0.330 0.380

－

5 7

20 28

－

－
－

－

－

－ －

(1)(2)

msec

cd/m

% (5)

(1)(3)
(1)(4)

2

(IL=150mA)

(1)(4)

(6)

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

o

Document Title HSD089IFW1-A Formal Specification Page No. 7/27

Document No. Revision 5.4

3.3 Measuring Equipment

■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity
and BM-5A for other optical characteristics.

■ Measuring spot size：20 ~ 21 mm

Note (1) Definition of Viewing Angle:

Note (2) Definition of Contrast Ratio (CR) :
measured at the center point of panel

Luminance with all pixels white
CR =
Luminance with all pixels black

www.jxlcd.com

www.jxlcd.com

Φ=180

Θ

L

6’ o’clock

Φ=270

Θ

D

Θ

U

12’ o’clock

Φ=90

Θ

o

o

R

Φ=0o

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 8/27

Document No. Revision 5.4

Note (3) Definition of Response Time : Sum of TR and TF

white(TFT OFF) black (TFT ON) white(TFT OFF)

T

R

100%

90%

Optical
response

Note (4) Definition of optical measurement setup

www.jxlcd.com

www.jxlcd.com

10%

0%

T

F

time

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 9/27

Document No. Revision 5.4

Note (5) Definition of brightness uniformity

16.67% 50.00% 83.33%

Y2 Y3 Y4

Y9 Y1 Y5

Y8 Y7 Y6

16.67%

50.00%

83.33%

www.jxlcd.com

www.jxlcd.com

Luminance uniformity = ×100%

Note (6)：Rubbing Direction (The different Rubbing Direction will cause the different

optima view direction.

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

(Min Luminance of 9 points)
(Max Luminance of 9 points)

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

1024 pixel (3072 Dots)

B G

LED

Document Title HSD089IFW1-A Formal Specification Page No. 10/27

Document No. Revision 5.4

4.0 BLOCK DIAGRAM

4.1 TFT LCD Module:

X-driver IC

Connector

Driver

EDID

DC/DC

Converter

Timing

Controller

+

LVDS

Receiver

Liquid Crystal Panel

1024x600 pixels

Y-driver IC

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

www.jxlcd.com

www.jxlcd.com

4.2 Pixel Format

1,1

2,1

600,1

1,2 1,3 1,4

Gray scale

Manipulation

Voltage

Generation

Circuit

LCD Display Area

1 Pixel

R

R

R

1,1024

600,

1024

600 Lines

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

scale of

Document Title HSD089IFW1-A Formal Specification Page No. 11/27

Document No. Revision 5.4

4.3 Relationship Between Displayed Color and Input

Basic
color

Gray
scale
of Red

Gray
scale of
Green

Gray
scale of
Blue

Gray
White &

Black

Display

Black L L L L L L L L L L L L L L L L L L

Blue L L L L L L L L L L L L H H H H H H

Green L L L L L L H H H H H H L L L L L L

Light Blue L L L L L L H H H H H H H H H H H H

Red H H H H H H L L L L L L L L L L L L
Purple H H H H H H L L L L L L H H H H H H
Yellow H H H H H H H H H H H H L L L L L L

White H H H H H H H H H H H H H H H H H H

Black L L L L L L L L L L L L L L L L L L

Dark

Light

Red H H H H H H L L L L L L L L L L L L Red L63

Black L L L L L L L L L L L L L L L L L L

Dark

www.jxlcd.com

Light

Green L L L L L L H H H H H H L L L L L L Green L63

Black L L L L L L L L L L L L L L L L L L

Dark

Light

Blue L L L L L L L L L L L L H H H H H H Blue L63

Black L L L L L L L L L L L L L L L L L L

Dark

Light

White H H H H H H H H H H H H H H H H H H White L63

MSB LSB
R5 R4 R3 R 2 R1 R0

L L L L L H L L L L L L L L L L L L
L L L L H L L L L L L L L L L L L L

↑
↓

H H H H L H L L L L L L L L L L L L
H H H H H L L L L L L L L L L L L L

L L L L L L L L L L L H L L L L L L
L L L L L L L L L L H L L L L L L L

↑

www.jxlcd.com

↓

L L L L L L H H H H L H L L L L L L
L L L L L L H H H H H L L L L L L L

L L L L L L L L L L L L L L L L L H
L L L L L L L L L L L L L L L L H L

↑
↓

L L L L L L L L L L L L H H H H L H
L L L L L L L L L L L L H H H H H L

L L L L L H L L L L L H L L L L L H
L L L L H L L L L L H L L L L L H L

↑
↓

H H H H L H H H H H L H H H H H L H
H H H H H L H H H H H L H H H H H L

:
:

:
:

:
:

:
:

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

MSB LSB
G5 G 4 G3 G2 G1 G0

:
:

:
:

:
:

:
:

MSB LSB
B5 B4 B 3 B2 B 1 B0

:
:

:
:

:
:

:
:

Gray scale

level

L0
L1
L2

L3…L60

L61
L62

L0
L1
L2

L3…L60

L61
L62

L0
L1
L2

L3…L60

L61
L62

L0
L1
L2

L3…L60

L61
L62

-

-

-

-

-

-

-

-

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

No Connection

NC

NC for RXIN3+

No Connection

No Connection

No Connection

No Connection

No Connection

Document Title HSD089IFW1-A Formal Specification Page No. 12/27

Document No. Revision 5.4

5.0 INTERFACE PIN CONNECTION

5.1 TFT LCD Module

CN1 (Input signal): I-PEX 20347-340-12 (IPEX or equivalent)

Pin No. Signal Description

1 GND Ground
2 VDD 3.3V Power
3 VDD 3.3V Power
4 V_EDID 3.3V Power for EDID
5 NC
6 CLK_EDID EDID Clock Input
7 DATA_EDID EDID Data Input
8 RXIN0- LVDS Signal - channel0­9 RXIN0+ LVDS Signal+ channel0+

10 GND Ground

11 RXIN1- Data Input channel1­12 RXIN1+ Data Input channel1+
13 GND Ground
14 RXIN2- Data Input channel2­15 RXIN2+ Data Input channel2+
16 GND Ground

www.jxlcd.com

www.jxlcd.com

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

17 RXCLKIN- Data Input CLK­18 RXCLKIN+ Data Input CLK+
19 GND Ground
20 NC
21 NC
22 GND Ground
23 NC
24 NC
25 GND Ground
26 NC Reserve for Hannstar test
27 NC
28 GND Ground
29 VLED LED Power Supply +5V
30 VLED LED Power Supply +5V
31 VLED_GND LED Ground
32 VLED_GND LED Ground
33 VLED_GND LED Ground
34 NC Reserve for Hannstar test
35 NC
36 NC Reserve for Hannstar test
37 NC
38 ADJ Adjust for LED brightness Note

：

：

：：

for RXIN3- channel3-

channel3+

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

No Connection

N

Document Title HSD089IFW1-A Formal Specification Page No. 13/27

Document No. Revision 5.4

Note

39 NC
40 NC

：

The brightness of LCD panel could be changed by adjusting ADJ

：

：：

[Note]
(1) ADJ can adjust brightness to control Pin. Pulse duty the bigger the brighter.

o Connection

(2) ADJ Signal=0~3.3V

www.jxlcd.com

www.jxlcd.com

PWM Frequency (F) Duty Cycle (Min.) Duty Cycle (Max.)

100Hz < F < 500Hz 5% 100%
500Hz < F < 20KHz 10% 100%

Duty Cycle = t / T *100%

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

，

Operation Frequency

，

，，

Dimming Range

：：：：

3.3V

0V

T

t

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Supply Voltage

Document Title HSD089IFW1-A Formal Specification Page No. 14/27

Document No. Revision 5.4

6.0 ELECTRICAL CHARACTERISTICS

6.1 TFT LCD Module

Current of
power supply

Note

：：：：

VDD<2.7V, VDD dip condition should also follow the Power On/Off conditions for supply

Item Symbol

VDD 3.0 3.3 3.6 V

V

4.7 5.0 5.3 V

LED

IDD - 0.27 - A VDD =3.3V、L0 pattern

(1)

V

dip condition :

DD-

When VDD operating within 2.7V≦VDD<3.0V，td≦10ms , the display may
momentarily become abnormal .

voltage.

Min. Typ. Max. Unit

V

DD

Note

Note (2)

GND

www.jxlcd.com

www.jxlcd.com

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

DE

2.5/7T

5.5/7T

Document Title HSD089IFW1-A Formal Specification Page No. 15/27

Document No. Revision 5.4

6.2 Switching Characteristics for LVDS Receiver

Item Symbol

Differential Input High Threshold Vth
Differential Input Low Threshold Vtl -100
Input Current I
Differential input Voltage |VID| 0.1
Common Mode Voltage Offset VCM (|VID|/2)

IN

Min. Typ.

－

－
－

-10

－
－

1.25

Max. Unit

100 mV

－

+10 uA

0.6 V

1.8-0.4-(|VID|/2)

mV

V

Conditions

VCM=1.2V

6.3 Bit Mapping & Interface Definition

7T

6.5/7T

4.5/7T

3.5/7T

1.5/7T

0.5/7T

RCLK

www.jxlcd.com

www.jxlcd.com

Rin0

Rin1

Rin2

R[2]

G[3]

B[4]

R[1]

G[2]

B[3]

Pervious cycle Current cycle

R[0]

G[1] B[1]

B[2] DE

G[0]

R[5]

B[0]

(VS)

R[4]

G[5]

(HS)

R[3]

G[4]

B[5]

R[2]

G[3]

B[4]

R[1]

G[2]

B[3]

LVDS Receiver Input Timing Definition

R[0]

G[1] B[1]

B[2]

Next cycle

G[0]

for 6bits LVDS input

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 16/27

Document No. Revision 5.4

6.4 Interface Timing (DE mode)

Item Symbol Min. Typ. Max. Unit
Frame Rate
Frame Period t1 612 625 638 line
Vertical Display Time t2 600 600 600 line
Vertical Blanking Time t3 12 25 38 line
1 Line Scanning Time t4 1160 1200 1240 clock
Horizontal Display Time t5 1024 1024 1024 clock
Horizontal Blanking Time t6 136 176 216 clock
Clock Rate t7 39 45 51.42 MHz

Timing Diagram of Interface Signal (DE mode)

-- 55 60 65 Hz

www.jxlcd.com

www.jxlcd.com

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

0.9VDD

0.9VDD

Document Title HSD089IFW1-A Formal Specification Page No. 17/27

Document No. Revision 5.4

6.5 Power On / Off Sequence

Power Supply

0V

Signal

0V

(Recommended)

TP6

Power Off

TP3

0.6V

0.1V

DD

TP4

0.1V

DD

0.1V

Power On

DD

TP1

TP2

0.6V

TP5

Backlight

50%

www.jxlcd.com

www.jxlcd.com

Item Min. Typ. Max. Unit Remark

TP1 0.5 -- 10 msec
TP2 0 -- 50 msec
TP3 0 -- 50 msec
TP4 500 -- -- msec
TP5 200 -- -- msec
TP6 200 -- -- msec

50%

Note：(1) The supply voltage of the external system for the module input should be the same as the

definition of VDD.

(2) Apply the lamp volatge within the LCD operation range. When the back-light turns on

before the LCD operation or the LCD truns off before the back-light turns off, the
display may momentarily become white.

(3) In case of VDD = off level, please keep the level of input signal on the low or keep a

high impedance.

(4) TP4 should be measured after the module has been fully discharged between power off

and on period.

(5) Interface signal shall not be kept at high impedance when the power is on.

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

C(30min), 100 cycles

Document Title HSD089IFW1-A Formal Specification Page No. 18/27

Document No. Revision 5.4

7.0 Reliability test items

No. Item Conditions Remark

1 High Temperature Storage Ta=+60oC, 240hrs
2 Low Temperature Storage Ta=-20oC, 240hrs

High Temperature Operation Ta=+50oC, 500hrs

3

Low Temperature Operation Ta=0oC, 500hrs

4

5 High Temperature and High Humidity

(operation)
6 Thermal Cycling Test (non operation) -20oC(30min) → +60
7 Electrostatic Discharge
8 Vibration

9 Shock

10 Vibration (with carton)

www.jxlcd.com

www.jxlcd.com

11 Drop (with carton)

Note: There is no display function NG issue occurred, all the cosmetic specification is judged

before the reliability stress.

1.Random:

2.Sine:

Half-Sine, 220G, 2ms, ±XYZ, 1time
Random:

Height：60 cm
1 corner, 3 edges, 6 surfaces

Ta=+50oC, 80%RH, 500hrs

o

±

200V,200pF(0Ω) 1 time/connector

1.04G, 10~500Hz, XYZ,
30min/each direction

1.5G, 5~500Hz, XYZ
30min/each direction

1.04G, 10~500Hz, XYZ,
45min/each direction

JIS Z0202

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 19/27

Document No. Revision 5.4

8.0 OUTLINE DIMENSION

8.1 Outline Dimension

nit : mm

www.jxlcd.com

www.jxlcd.com

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 20/27

Document No. Revision 5.4

HannStar

www.jxlcd.com

www.jxlcd.com

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

２

３

４

５

６

７

８

９

10

11

12

13

14

15

Rev

: *

-A

EDX.X 6 A0

Document Title HSD089IFW1-A Formal Specification Page No. 21/27

Document No. Revision 5.4

9.0 LOT MARK

9.1 Lot Mark

１

Code 1,2,3,4,5,6: HannStar internal flow control code.
Code 7: production location.
Code 8: production year.
Code 9: production month.
Code 10,11,12,13,14,15: serial number.

Note (1) Production Year: Code 8 is defined by the last number of the year, for example

Year 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010

Mark 1 2 3 4 5 6 7 8 9 0

Note (2) Production Month

Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.

Mark 1 2 3 4 5 6 7 8 9 A B C

www.jxlcd.com

9.2 Detail of Lot Mark

www.jxlcd.com

(1) Below label is attached on the backside of the LCD module. See Section 8.0:

Dimension.

(2) The detail of Lot Mark is attached as below.
(3) This is subject to change without prior notice.

HSD089IFW1

Outline

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 22/27

Document No. Revision 5.4

10.0 PACKAGE SPECIFICATION

10.1 Packing form

(1) Package quantity in one carton: 60 pieces.
(2) Carton size: 534 mm×298 mm×334 mm.

10.2 Packing assembly drawings

www.jxlcd.com

www.jxlcd.com

Material Notice

Box Corrugated Paper Board

Partition/Pad Corrugated Paper Board

Corner Pad Corrugated Paper Board

ESD bag PE

(AB Flute)

(B Flute)

(AB Flute)

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 23/27

Document No. Revision 5.4

11.0 GENERAL PRECAUTION

11.1 Use Restriction

This product is not authorized for use in life supporting systems, aircraft navigation control
systems, military systems and any other application where performance failure could be
life-threatening or otherwise catastrophic.

11.2 Disassembling or Modification

Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.

11.3 Breakage of LCD Panel

11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.

11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.

11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and

rinse thoroughly with water.

11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is

broken.

11.4 Electric Shock

www.jxlcd.com

www.jxlcd.com

11.4.1. Disconnect power supply before handling LCD module.

11.4.2. Do not pull or fold the LED cable.

11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector

or cables in order to prevent electric shock.

11.5 Absolute Maximum Ratings and Power Protection Circuit

11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.

11.5.2. Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.

11.5.3. It’s recommended to employ protection circuit for power supply.

11.6 Operation

11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.

11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.

11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 24/27

Document No. Revision 5.4

11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops

contact with polarizer for a long time, they may causes deformation or color
fading.

11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little

petroleum benzine or other adequate solvent.

11.7 Mechanism

Please mount LCD module by using mounting holes arranged in four corners tightly.

11.8 Static Electricity

11.8.1 Protection film must remove very slowly from the surface of LCD module to

prevent from electrostatic occurrence.

11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is

very weak to electrostatic discharge. Please be careful with electrostatic
discharge. Persons who handle the module should be grounded through
adequate methods.

11.9 Strong Light Exposure

The module shall not be exposed under strong light such as direct sunlight. Otherwise,

display characteristics may be changed.

www.jxlcd.com

11.10 Disposal

When disposing LCD module, obey the local environmental regulations.

www.jxlcd.com

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 25/27

Document No. Revision 5.4

For specific customer, it has to be defined by sales.

3.1 Optical specification

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast CR
Response

time
White luminance

(Center)
Color gamut S

Color
chromaticity

(CIE1931)

www.jxlcd.com

www.jxlcd.com

Viewing
angle

Rising TR

Falling TF

YL

Wx

White

Wy

Rx

Red

Ry
Gx

Green

Gy
Bx

Blue

By

Θ

Hor.

Θ

Θ

Ver.

Θ

L

R

U

D

CR>10

Θ=0

Normal
viewing

angle

400 500

－
－

180 220

－

0.260

0.280

0.554

0.317

0.313

0.516

0.106

0.078
60 70

60 70
40 50
50 60

0.310 0.360

0.330 0.380

0.604

0.367

0.363

0.566

0.156

0.128

－

5 7

20 28

－

47

－

0.654

0.417

0.413

0.616

0.206

0.178

－
－

－

－

(1)(2)

msec

cd/m

%

(1)(3)
(1)(4)

2

(IL=150mA)

(1)(4)

Brightness uniformity B

Optima View Direction

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

UNI

Θ=0

70

6 O’clock

－ －

% (5)

(6)

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 26/27

Document No. Revision 5.4

HSD 089IFW1-A02_ 3.5G

8.0 OUTLINE DIMENSION

8.1 Outline Dimension

Unit: mm

HannStar

www.jxlcd.com

www.jxlcd.com

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.

HannStar Display Corp.

sive property of HannStar Display Corporation. It shall not be

Document Title HSD089IFW1-A Formal Specification Page No. 27/27

Document No. Revision 5.4

HSD089IFW1-A00
For specific customer revision (Samsung Only)

7.0

Reliability test items

No. Item Conditions Remark

1 High Temperature Storage Ta=+70oC, More than 96hrs
2 Low Temperature Storage Ta=-20oC, 240hrs

High Temperature Operation Ta=+60oC, More than 96hrs

3

Low Temperature Operation Ta=0oC, 500hrs

4

5 High Temperature and High Humidity

(operation)
6 Thermal Cycling Test (non operation)
7 Electrostatic Discharge
8 Vibration

www.jxlcd.com

www.jxlcd.com

9 Shock

10 Vibration (with carton)

11 Drop (with carton)

Note: There is no display function NG issue occurred, all the cosmetic specification is judged

before the reliability stress.

1.Random:

2.Sine:

Half-Sine, 220G, 2ms, ±XYZ, 1time
Random:

Height：60 cm
1 corner, 3 edges, 6 surfaces

Ta=+50oC, 80%RH, 500hrs

-25℃ ~ 70℃ 150 Cycle

±

4KV, 5 times/connector

1.04G, 10~500Hz, XYZ,
30min/each direction

1.5G, 5~500Hz, XYZ
30min/each direction

1.04G, 10~500Hz, XYZ,
45min/each direction

JIS Z0202

The information contained in this document is the exclu
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.