HANNspree XV 32 User Manual

JT2001131680P

Explanation of WARNING Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence dangerous voltage within the
inside of the product that may be sufficient level to constitute a risk of electric
shock.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and servicing instructions.

Safety instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this LCD TV near water.

English

6) Clean only with dry cloth. Do not use liquid, alcohol, or aerosol cleaners.

7) Do not block any ventilation openings. Install your LCD TV in a well ventilated
area.

8) Keep your LCD TV away from moisture, excessive dust and any heat sources,
such as radiators, heat registers, stoves, or any other apparatus (including
amplifiers) that produce heat.

9) Do not remove the back cover. There are no user-serviceable parts inside.

10) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

11) Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from the LCD TV.

12) Never rest objects on the power cord or place it in high traffic areas.

13) Only use attachments/accessories specified by the
manufacturer.

14) Use only with stand, tripod, bracket, or table specified by
the manufacturer, or sold with the LCD TV. When a cart is
used, use caution to avoid injury from tip-over.

15) Unplug this LCD TV during lightening storms or when
unused for long periods of time.

16) Refer all servicing to qualified service personnel-­Servicing may be required if the LCD TV has been damaged in any way, such as
power-supply cord or plug damage, liquid has been spilled or objects have fallen
into the LCD TV, the LCD TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.

17) Do not expose your LCD TV to dripping or splashing, and do not place objects
filled with liquids on it.

18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the
back panel of unit.

19) This product is only to perform the useful function of entertainment and visual
display tasks are excluded.

20) Wall or ceiling mounting: When mounting the product on a wall or ceiling, be sure
to install the product according to the method recommended by the manufacturer.
Use only the mounting hardware recommended by the manufacturer. This is a
safety feature.

English

CAUTION: Any damage caused by incorrectly attempting to mount this
LCD TV is not covered under the terms of the manufacturers warranty.

WARNING: To reduce the risk of fire or electric shock, do not expose this
LCD TV to rain or moisture.
WARNING: Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you
are qualified to do so.

Operation Instructions

Thank you for purchasing multi-scan color LCD-TV. Please read this guide thoroughly before
installation.

FCC RADIO FREQUENCY INTERFERENCE STATEMENT

WARNING: (FOR FCC CERTIFIED MODELS)

This
pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection
against harmful interference to a residential installation. This
radiate radio frequency energy. Harmful interference to radio communication may be led as a
result if it‘s not properly installed and used. However, there is no guarantee that interference will
not occur in a particular installation. If this
television reception, resetting the
correct interference by doing one or more of the following:

‧Reorient or relocate the receiving antenna.
‧Move the
‧Connect the

connected.

‧Consult your local dealer or an qualified technician.

FCC Warning:

To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes
or modifications to this LCD-TV would void the user‘s authority to operate this device.

LCD-TV

has been tested and found compliant with the limits for a Class B digital device,

generates, uses, and can

LCD-TV

LCD-TV

LCD-TV

LCD-TV

LCD-TV

and the receiver further away from each other.

into an outlet on a circuit different from that to which the receiver is

may determine it. Moreover, users are encouraged to

does cause serious interference to radio or

HDMI Licensing Statement

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.

Antenna Installation Instruction

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static
charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning and power-line surges.
Do not disconnect the antenna or the power cord during a heavy storm lighting may strike while
you are holding the cable cord, causing serious injury; turn off your LCD TV and wait for the
weather to improve.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits, When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.

English

English

Content

ACCESSORIES................................................................................................................. 1

FRONT PANEL BUTTONS ................................................................................................ 2

REAR HOUSING IOS........................................................................................................ 3

REMOTE CONTROL......................................................................................................... 4

INSTALLATION.................................................................................................................. 6

Connecting RF antenna, Cable TV Wire or DTV cable............................................... 6

Connecting to DVD / Set Top Box............................................................................... 6

Connecting to External Stereo System to Listen to LCD TV Sound............................ 8

Connecting to the Headphone .................................................................................... 8

Connecting to a Computer.......................................................................................... 8

PC Audio In................................................................................................................. 9

Connecting to A/V Device with SPDIF input ............................................................... 9

Connecting with the power cord ................................................................................. 9

BASIC OPERATION ........................................................................................................ 10

Turning on the LCD TV............................................................................................. 10

Power On/Off............................................................................................................ 10

Select input source ................................................................................................... 10

Volume Adjusting ...................................................................................................... 10

INFO......................................................................................................................... 10

DTV Guide.................................................................................................................11

Picture .......................................................................................................................11

Sound ........................................................................................................................11

Channel Select ..........................................................................................................11

Sleep Time Setting.....................................................................................................11

Zoom .........................................................................................................................11

Favorite Channel ...................................................................................................... 12

Freeze Picture .......................................................................................................... 12

Using the OSD function ............................................................................................ 12

ADVANCED OPERATION—OSD MENU ........................................................................ 13

Video Menu............................................................................................................... 13

Audio Menu .............................................................................................................. 13

TV Menu................................................................................................................... 14

Setup Menu .............................................................................................................. 14

DTV Menu ................................................................................................................ 16

VGA Menu ................................................................................................................ 19

ADVANCED OPERATION—REMOTE CONTROL.......................................................... 19

V-Chip Menu............................................................................................................. 19

PIP/POP ................................................................................................................... 22

TECHNICAL SPECIFICATION ........................................................................................ 24

SAFETY PRECAUTIONS................................................................................................ 25

CARE AND MAINTENANCE ........................................................................................... 26

TROUBLESHOOTING..................................................................................................... 26

ACCESSORIES

Thank you for purchasing this LCD-TV.
This LCD-TV package comes with:

 LCD TV
 User’s Manual
 Quick Start Guide
 Warranty Card
 Product Registration Card
 Remote control
 Battery AAA x 2
 Power Cord
 VGA Cable
 RCA A/V Cable

English

1

English

FRONT PANEL BUTTONS

     





 Volume Down
 Volume Up
 On Screen Display Menu On/Off
 CH Down
 CH Up
 Enter
 Power ON/OFF button
 Remote Control Receiver

❾ Power LED Indicator

Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.

(Only for DTV source in this model.)

Note:

1. Press
press

VOL+

2. Press
press

VOL-

2

VOL+

VOL-

and
and

and

and

MENU
MENU

VOL+

VOL+

buttons at the same time to lock power button, and
buttons again to unlock it.

buttons at the same time to lock OSD menu, and

buttons again to unlock it.

REAR HOUSING IOS

A

B

C
D

E

F

G

English

N M L K J I H

A Analog TV input
B Digital TV input
C S-Video input
D AV/ S-Video signal Audio input (left/right)
E YPbPr signal Audio input (left/right)
F YPbPr signal input
G Composite Video input
H Audio output

I PC Audio input

J VGA signal input
K HDMI Input Terminal
L SPDIF Optical output

M Headphone Jack

N Power (AC input)

3

English

REMOTE CONTROL

4

Remote control button function as follows:

1 POWER Power ON/OFF
2 MTS Selects Mono, Stereo or SAP in TV mode. Select audio

language in DTV mode (MTS works in both ATV and DTV
modes)

3 INFO Displays current information
4 SLEEP Sets the TV Sleep Timer
5 SOUND Selects sound modes
6 0~9, 100/- number

button
7 VOL+ and VOL- Adjusts volume UP/DOWN
8 GUIDE Shows the electronic program guide (EPG)
9 FAV.A/D To skip or restore Favorite Channels

10 UP/DOWN/LEFT/RIGHT/

ENTER

11 INPUT Input source select
12 ZOOM Adjusts window size
13 FREEZE “Freeze-Frame” the current screen
14 P. POS Adjusts sub-screen window position
15 C.C Displays captions during programing that offer Closed Captioning

16 P. S I Z E Adjusts sub-screen window size
17 MUTE
18 TV/DTV

19 PICTURE

Access channels directly

UP/DOWN/LEFT/RIGHT: Navigate and adjust OSD functions
ENTER: Enter the selected function setting

service

Volume mute ON/OFF
Swaps between TV/DTV modes. Swap to TV when in other

source

Selects picture modes

English

20 RETURN Return to previous channel
21 CH▲ and CH▼ Adjusts Channel UP/DOWN
22 FAV. CH Selects from preset Favorite Channels
23 MENU On Screen Display (OSD) menu ON/OFF
24 WIDE Change the image scaling
25 PIP/POP Toggle to enable/disable Picture in Picture/Picture Out of

Picture function

26 P.INPUT POP/PIP input source select
27 V-CHIP Sets V-Chip rating
28 SWAP Switches between main screen and sub-screen

Note: PIP means Picture In Picture. POP means Picture Out Of Picture.

5

r

A

English

INSTALLATION

Connecting RF antenna, Cable TV Wire or DTV cable

Make sure the power is OFF before installing your LCD TV.

1) TV: Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV
channels into memory with AUTO SCAN function when using an antenna or cable TV system
without a cable connecter box (See page 14).

2) DTV: Connect the LCD TV to the cable with an antenna capable of receiving DTV broadcast
signals and preset DTV channels into memory with AUTO SCAN function in DTV menu (see
page 16).

RF Cable or Adapter
(not supplied)

ntenna

(not supplied)

Connecting to DVD / Set Top Box

Connect Video/Audio cables from compatible devices into the back panel of LCD TV.

1) With AV cable:

RCA A/V Cable

VCR or DVD Playe

6

2) With S-Video cable:

r

A

r

A

r

S-Video Cable (not supplied)

udio in Cable

(not supplied)

VCR or DVD Playe

3) With YPbPr cable:

4) With HDMI cable:

YPbPr Cable (not supplied)

VCR or DVD Playe

udio in Cable

(not supplied)

English

VCR or DVD Playe
(DVD Player should have
the HDMI output terminal)

HDMI Cable (not supplied)

7

Connecting to External Stereo System to Listen to LCD TV Sound

Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system
(stereo system sold separately).

Audio in Cable

(not supplied)

English

Stereo system

Connecting to the Headphone

Connect the headphone to the headphone output terminal of the LCD TV.
(Headphone sold separately).

Headphone
(not supplied)

Connecting to a Computer

Connect the VGA cable from VGA output of Computer to the VGA terminal input of your
LCD TV.

PC

VGA 15 Pin Cable

8

PC Audio In

A

A

A

Connect the Audio cable (green) from audio output of your Computer to the audio input
terminal (green) of your LCD TV.

PC

English

PC Audio Connection (not supplied)

Connecting to A/V Device with SPDIF input

Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV.

udio Cable

(not supplied)

/V Device

SPDIF Optical Cable (not supplied)

Stereo System

Powering the LCD TV

Connect the power cord to the AC inlet on the back of your LCD TV, after all connections
have been completed, and plug the other end of the power cord into a correctly grounded
electrical outlet.

C wall Switch

Note: For more information on external devices, please refer to the manufacturer’s user manual.

9

English

BASIC OPERATION

To operate your LCD TV, you may use the TV remote control or top panel buttons to select
input source, change channels, or adjust volume.

Turning on the LCD TV

Before using the LCD TV:

1. Confirm that all external equipment is connected properly.

2. Insert the power plug and the power LED indicator will light red.

Power On/Off

To turn the LCD TV on/off :
Press POWER button under the LCD TV, or press the POWER button on your remote
control to turn on/off the TV. The power LED indicator lights green when the LCD TV is on.

Select input source

To select the desired input source:
Press the INPUT button on the remote control, Use ◄► to select the required input source

between TV, DTV, HDMI, YPbPr, AV, S-Video, and VGA.
To confirm the selection, press ENTER.

Volume Adjusting

Press VOL +/- to adjust volume.
To silence volume, press MUTE.
If you want to restore volume, press MUTE again, or press VOL +/- directly.

INFO
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or some of
the information about Input, Channel, Resolution, Audio Type, Smart Sound Modes, and
Smart Picture Modes, depending on what input source it is in.)

TV DTV

10

DTV Guide

To see the electronic program guide of the channel, press the GUIDE button on your
remote control. It will display the background information related to the channel program.

Picture

Press the PICTURE button on the remote control to switch between the Smart Picture
modes of User, Cinema, Sport, Vivid, and Hi-Bright.

Sound

Press the SOUND button on the remote control to switch between the Smart Sound
modes of User, Rock, POP, Live, Dance, Techno, Classic, and Soft.

Channel Select
Press number key or CH ▲/▼ button to select your desired channel.

1. In TV mode

The 100/- button functions as “100”. If your desired channel is below 100, directly press
number buttons. If your desired channel is over 100, press 100/- button first, and then
press the other two number buttons.
Ex: Your desired number is 8.
Press 0 → press 8, or press 8 only.
Ex: Your desired number is 110.
Press 100/- → press 1 → press 0.

※ Return to the previous channel, press RETURN button.

2. In DTV mode

The 100/- button functions as “ - “. Use 100/- button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press 100/- → press 3.

Sleep Time Setting

Repeatedly press SLEEP button to set the off timer. The function is used to automatically
shut off the LCD TV after a preset period of time passed. There are several times for
choice – OFF, 30min, 60min, 90min, or 120min.

Zoom

Press ZOOM button repeatedly to select the screen size. You can select from 1/8, 1/4, 1/2,
1, x2, x4, and x8.

English

11

English

Favorite Channel

You can press FAV.CH button to watch your favorite channels. Use FAV.A/D button to add
the current channel to your favorite channels, or to delete it from your favorite channels.
You can add up to 10 favorite channels.

Freeze Picture
Press FREEZE button to freeze picture. However, the sound still continues.

Using the OSD function

You can use the OSD menus and options to adjust various settings by using the remote
control.
The basic operation is as following:

 Press MENU to display OSD menu.
 Press ◄► to select your desired top Menu.
 Use ▲▼ to select the control you want to adjust.
 When selecting the control with Press <Enter>, press ENTER to enable the function.
 Press ◄► to adjust or select the settings.
 Press MENU to exit from the OSD menu.

12

ADVANCED OPERATION—OSD MENU

Video Menu
— Adjusting the picture quality
Video Menu is active in all but the VGA input source.

‧Contrast: To adjust contrast of video. (right: Max, left: Min.)
‧Brightness: To adjust luminance of video. (right: Max, left: Min.)
‧Color: To adjust color. (right: brilliant color, left: pale color.)
‧Tint: To adjust tint level. (right: greenish tone, left: reddish tone.)
‧Sharpness: To adjust picture sharpness. (right: sharper, left: softer.)

Note: To adjust the Video settings, Smart Picture must be set to the User mode. (Select through
the Picture button on the remote control)

English

Audio Menu
—To set the audio quality and status

Audio Menu is active in all but the VGA input source.

‧Bass: To adjust bass.
‧Treble: To adjust the treble
‧Balance: To adjust left and right audio balance.
‧Surround: To enjoy a concert hall effect, select On when stereo is playing.
‧Audio out: To control sound output ON/OFF from the RCA audio out connectors.

Note: To adjust the Audio settings, Smart Sound must be set to the User mode. (Select through
the Sound button on the remote control)

13

English

TV Menu
—To set up for TV

It is only active in TV source.

‧Tuner Mode: To select Cable or Air as the TV source.
‧Auto Scan: To auto scan the TV channels. Press ENTER to start auto scanning

TV channels. Press ENTER again at any time to interrupt scanning.

‧TV: To select the TV channel to be skipped. Press ◄► to change channels.
‧Channel Add/Del.: Select Delete to skip the channel appointed, or select Add to

restore the channel appointed.

‧Channel Edit: Press ENTER to edit a name for the channel appointed. Use

▲▼◄► to select the letters you want, and use BackSpace key to delete
backwards. Move the cursor to OK and then press ENTER to complete and save
the channel name. To cancel editing, choose Cancel or exit without pressing OK.

Setup Menu
—To set up OSD window

Setup Menu is active in all input sources.

‧Language: To select a OSD language from English, French or Spanish.
‧Parental: To set up parental control.

14

When you enter this control, the screen below will be displayed.

The factory default of the password is “0000”.
To enable parental control, input the password, press ▼ button to focus on OK key, and press
ENTER. (select Cancel if you want to exit)
After entering, the following screen will be shown.

Channel Lock: To lock channels. Use ◄► to select the channel you want to lock, and then
press ENTER to lock or unlock it.
Change Password: To change the password, press ENTER and enter the
password again. Press ENTER, and the following screen appears.

English

Enter the new password, use ▼ to move the cursor down, and then enter the new password
again, press OK to confirm or Cancel to exit.
Note: Please make sure you remember your new password after changing, because you cannot
recall the default setting of the password by any selection.
Clear All: To clear all the locks set before, press ENTER.

Press MENU to return to the previous page.
‧Color Temperature: To select the color temperature from Warm, Cold, Normal or User. (If you

select User, you can adjust the degree of R, G, B in Color Temp. to suit your personal
preference.)

‧Back Light: To adjust the luminance of the back light.
‧Aspect Ratio: To select image size between Normal, Full, Wide1, Wide2, Wide3,

4:3, 16:9, and No scale.

‧OSD Timeout: To setup the display time of OSD. (5, 15, 45, and 60 seconds)
‧Memory Recall: To restore the factory default settings.

15

English

DTV Menu
—To set up DTV settings

It is only active in DTV source.

‧Audio Language: To select an audio language from English, French, or Spanish.
‧Time Zone: To select Time Zones.
‧SPDIF Type: To select the type of audio transfer file format.
‧Auto Scan: Press ENTER to start scanning DTV channels automatically. Press MENU at any

time to cancel Auto Scan.

‧Manual Scan: To scan the DTV channels manually.

Press ENTER and select Scan Mode with ◄►.

16

When in Add-on Mode, Press ENTER to start scanning all channels, and press MENU at
anytime to cancel scanning.

When in Range Mode, use ▲▼ and number buttons to set the scanning range.

English

Press ENTER to start scanning, and press MENU at anytime to cancel scanning.

‧Channel Skip: To skip channels when viewing channels with CH ▲ and ▼.

Press ENTER, and then use ENTER to check/uncheck the channel you want to skip.

17

English

‧Channel Block: Press ENTER to enter the password and block/unblock the channel(s).
‧Caption: To select closed caption signal formats and set up caption modes. (CC1~CC4,

Service1~Service 6)
Use ▲▼ to select Analog Closed Caption or Digital Closed Caption, and then use ◄► to
select caption types.
Move the cursor to Caption Style, and press ENTER.

Use ◄► to select Caption Style from As Broadcaster or Custom.
When Custom is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed

settings.

Font Size: To select a font size from Large, Small, or Medium.
Font Color: To select a font color from Black, White, Green, Blue, Red, Cyan, Yellow, or

Magenta.

Font Opacity: To select font opacity from Solid, Translucent, or Transparent.
Background Color: To select background color.
Background Opacity: To select background opacity.
Window Color: To select window color.
Window Opacity: To select window opacity.

18

VGA Menu
—To set up for computer

It is only active in VGA source.

‧Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position, fine

tune and H-Size.

‧Contrast: To adjust contrast of the video.
‧Brightness: To adjust luminance of the video.
‧Fine Tune: To adjust the delay time of data and clock to reduce noise in picture.
‧Manual Clock: To adjust the horizontal pixel clock of the video.
‧H. Position: To adjust the horizontal position of the picture.
‧V. Position: To adjust the vertical position of the picture.

English

ADVANCED OPERATION—REMOTE CONTROL

V-Chip Menu

V-Chip is transmitted from TV station to help parents monitor what their children watch.
According to the pre-set of factory, viewers can see all of the channels. However, setting
V-Chip can block the appointed channels.

To set up V-CHIP function: Press V-CHIP button → enter the password → press ENTER, and
the following screen will be displayed.
Note: The factory default of the password is “0000”. If you have changed the password, please
make sure you remember the new password, because you cannot recall the default setting of
the password by any selection.

Use ▲▼ to select your desired optional item, and press ENTER.

19

‧Block MPAA Rating: To adjust movie blocking level in the US. You can select between NONE,

G, PG, PG-13, R, NC-17, or X.

English

The movie Ratings in the US are defined as following.

G General audience R Restricted
PG Parental guidance suggested NC-17 No one 17 and under limited
PG-13 Parents strongly cautioned X Adult audience only

Use ENTER button to block or unblock the ratings, and use MENU to exit.

‧Block TV Rating: To adjust TV blocking level in the US. You can select between TV-Y, TV-Y7,

TV-G, TV-PG, TV-14, or TV-MA.

The TV Ratings in the US are defined as following.

TV-Y All children TV-PG Parental guidance suggested

Directed to older children: this program

TV-Y7

TV-G General audience TV-MA Mature audience only

Use ENTER button to block or unblock the ratings, and use MENU to exit.

20

is designed for children age 7 and
above

TV-14

Parents strongly cautioned: this
program contains some material
that is unsuitable for children under
14 years of age

‧Canadian English Rating: To adjust blocking level in English-speaking region of Canada. You

can select between CE_E, CE_C, CE_C8, CE_G, CE_PG, CE_14, and CE_18.

The TV Ratings in English-speaking region of Canada are defined as following.

CE_E Exempt CE_PG Parental guidance

CE_C Children CE_14 Viewers 14 years and older

CE_C8 Children eight years and older CE_18 Adult programming

English

CE_G

Use ENTER button to block or unblock the ratings, and use MENU to exit.

‧Canadian French Rating: To adjust blocking level in French-speaking region of Canada. You

can select between CF_E, CF_G, CF_8ANS, CF_13ANS, CF_16ANS, and CF_18ANS.

The TV Ratings in French-speaking region of Canada are defined as following.

CF_E Exempt CF_13ANS

General programming, suitable for all
audiences

This emission can not be
appropriate to the children of less
than 13 years

CF_G General CF_16ANS

CF_8ANS

Use ENTER button to block or unblock the ratings, and use MENU to exit.

‧Block MPAA Unrated: To block unrated movies.
‧Block TV None Rating: To block unrated TV programs.

21

General-Disadvised to the
young children

CF_18ANS

This emission is not appropriate for
less than 16 years

This emission is reserved to the
adults

English

PIP/POP

PIP/POP button allows you to watch two screens from different sources at the same time.
(PIP is picture in picture; POP is picture out of picture)
Press PIP/POP on the remote control repeatedly.
The screen will change from normal screen → PIP screen → POP screen.

PIP Screen POP Screen

‧PIP Input Source Select

1. Press P.INPUT button to select input source for sub-screen as following.

Main Screen Available Sub-Screen Input Source
TV DTV/ HDMI / YPbPr / VGA
DTV TV / YPbPr / AV / S-Video / VGA
HDMI TV / YPbPr / AV / S-Video / VGA
YPbPr TV / DTV / HDMI / AV / S-Video
AV DTV/ HDMI / YPbPr / VGA
S-Video DTV/ HDMI / YPbPr / VGA
VGA TV / DTV / HDMI / AV / S-Video

2. Use ◄► to select the sub-input source and press ENTER to confirm.
Note: To select the input source for main screen, press INPUT button

‧SWAP: Press SWAP to exchange main screen to sub-screen, including video and sound.

The function is available both in PIP and POP.

22

‧PIP Size Select: Press P. SI Z E to select the size of sub-screen. The function only acts on

PIP.

‧PIP Position Select: Press P.P O S to select the position of sub-screen. The function only

acts on PIP.

Note that the screen indexed with the pink frame is the screen you select to set up. Use
◄► to move the index between the main screen and the sub-screen.

English

23