HANNspree WT08-10A1 User Manual

NTSCTVTWEN1203
MAC-001040

User's Manual

9.6" Liquid Crystal Display
Television

WT08-10A1

2F, No.362, Ruei-Guang Rd., Neihu District,

Taipei City 114, Taiwan, R.O.C.

TEL: [phone]

FAX: [phone]

For more information on Looney Tunes visit

www. looneytunes.com

For further information visit

www.hannspree.com

TM

Table of Contents

1

1. Warranty and Service .................................................... 3

2. Preface......................................................................... 4

3. Description of Warning Symbols ..................................... 5

4. Safety Notices............................................................... 6

5. Regulatory Information ................................................ 14

6. Introducing the TV....................... ................................ 16

Features.................................................................. 16

7. Checking Package Contents ........................................ 17

8. Getting to Know Your TV ............................................. 18

Front View................. .............................................. 18

Input and Output Ports............................................. 19

Inserting the TV into the TV stand ............................ 21

9. Getting Started............................................................ 22

Connecting to an Antenna/Cable TV ......................... 22

Connecting to AV Devices........................................ 23

Connecting to a VCR, VCD or DVD Player ........... 23

Connecting to a Video Camera ............................ 24

Connecting External Speakers and Headphones ....... 25

Connecting the Power Adapter ................................. 26

10. Using the TV .............................................................. 27

Using the Remote Control ........................................ 27

Turning the TV On and Off ....................................... 28

Selecting Channels.................................................. 28

Switching Source Signals......................................... 29

Adjusting the Volume ............................................... 29

Table of Contents

2

11. Adjusting On-Screen Display (OSD) Settings ............... 30

Brightness............................................................ ... 31

Contrast ............................................................... ... 32

Video Setting........................... ................................ 33

Hue ................................................................. ... 34

Saturation........................... ................................ 35

Sharpness .......................................................... 36

Color Temperature .............................................. 37

Audio Setting........................... ................................ 38

Treble..... ............................................................ 39

Bass....... ............................................................ 40

Balance .............................................................. 41

Mute....... ............................................................ 42

TV Setting ............................................................ ... 43

TV/CATV ............................................................ 44

MTS ................................................................... 45

Auto Program ................................................... ... 46

Manual Program .................................................. 47

Channel Add/Erase ............................................. 48

Favorite Channels............................................... 49

Miscellaneous Setting .............................................. 50

Language ........................................................... 51

Sleep Timer ........................................................ 52

OSD Display ....................................................... 53

Time Setting ....................................................... 54

Reset .................................................... .................. 55

Exit ........................... .............................................. 55

12. Taking Care of Your TV .............................................. 56

13. Troubleshooting ....................................................... ... 57

14. Specifications............................. ................................ 59

15. Glossary .................................................................... 60

3

The instructions on this manual are for the model(s) listed on the front
cover. Before you start reading, check your product number by looking
at the rear of your TV.

Thank you for purchasing our Liquid Crystal Display Television (LCD
TV). With this product, you will be able to enjoy superior audio and
video while enriching your lifestyle with advanced technology.

The Hannspree TV is warranted for one year limited service from the
date the product is received (as shown on the Warranty and Service
Manual); please refer to the “Warranty and Service Manual” for the
detailed warranty information.

Hannspree provides complete service information in the included “War­ranty and Service Manual”, or directly from Hannspree global customer
service center. Our service representatives will be very happy to serve
you to your satisfaction.

Hannspree global customer service center telephone number:
From Taiwan please call 0800-008-800

The Hannspree e-mail address:
[e-mail]

1

Warranty and Service

4

This manual is designed to assist users in setting up and using t he
LCD TV. Information in this document has been carefully checked
for accuracy; however, no guarantee is given to the correctness of
the contents. The informat ion in this document is subject to chan ge
without notice.

Copyright

© Copyright 2003 Hannspree, Inc.
All rights reserved. This product and related documentation are pro-

tected by copyright and are distributed under licenses restricting their
use, copying, and distribution. No part of this documentation may be
reproduced in any form by any means without prior written authorization
of Hannspree, Inc., and its licensors, if any.

2

Preface

5

Electric Power Notice

Electric power may cause personal injury and mechanical damage if it is
misused. Although safety has been taken into consideration during the
design and production of this product, electric shock or fire can result
when the product is misused. To prevent potential danger, follow the
instructions below when installing, operating and cleaning the product.
In addition, read the following “Safety Notices” carefully before using the
product to ensure that your TV is safe and long-lasting.

Warning

This symbol is used to remind
users to pay attention to
important descriptions regard­ing usage and maintenance
(repair) or additional impor­tant information related to this
product.

Caution

This symbol is used to remind
users to pay attention to the
danger of electric shocks due
to dangerous internal non­insulated components.

Description of Warning Symbols

3

6

Power Supply Safety Notes

1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this product's plug or leaves the
plug exposed.

2. This product has a 3-pin grounded plug. The third pin connects
to ground; do not remove it.

3. If the power cord or plug is damaged or worn, unplug it immedi­ately and contact a qualified service technician for mainte­nance.

4. To avoid fire or electric shocks, do not overload electric power
outlets.

Installation Safety Notes

Antenna

We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in
a location free from interference.

Location

Avoid allowing the TV to get prolonged exposure to sunlight or
other strong sources of heat. Leave suf f icient d ist ance b etween the
TV and the wall to provide enough space for the emission of heat.

Safety Notices

4

7

Before You Proceed

1. Read the Safety Notices and the User’s Manual carefully
before turning the product on.

2. Keep your User’s Manual in a safe place for future reference.
Keep the box and packaging in case the product needs to be
shipped in the future.

3. Follow the product and warning label instructions.

4. Any changes or modifications that do not follow the instructions
in this manual will void this product's warranty.

Warning

To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.

Power

To avoid danger of fire s or electric shock, make sure that you use a
proper adapter. The TV is compatible with the following adapters:

• EDAC POWER ELECTRONICS CO., LTD.: EA 1050E-120

• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240

8

Optimal Viewing Distance

c

h

v

o

l

v

o

l

t

v

/

a

v

c

h

M

E

N

U

102 cm

9

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Insta ll
in accordance with the manufacturer’s
instructions.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

9. Do not defeat the safety purpose of the
polarized or grounding-type plug: A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.

10

10. Protect the power cord from being walked on
or pinched particularly at the plug, conve­nience receptacles, and the point where they
exit from the apparatus.

11. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

12. Only use attachments/accessories specified
by the manufacturer.

13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.

14. Refer all servicing to qualified service per­sonnel. Servicing is required when the appa­ratus has been damaged in any way, such as
if the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not oper­ate normally, or has been dropped.

11

Personal Safety

To avoid overloading the power supply, do not
plug too many electrical devices into an outlet or
extension cable.

Dangerous high-voltage electric power compo­nents are located inside the TV. To avoid electric
shock, do not disassemble the casing.

Do not place or drop metals, small objects, or
flammable materials in the vent to avoid an elec­tric shock or a fire.

If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and notify a qualified service technician.

If any fluid is sprayed or dropped into the TV,
remove the power plug immediately and notify a
qualified service technician.

The screen of the TV is made of glass, be care­ful to avoid hitting or scraping it. If the screen is
broken, avoid cutting yourself on the broken
glass.

Do not allow children to use the TV unattended
to avoid accidents caused by improper opera­tion.

12

Installation

To avoid damage to power circuits, do not place
the TV in locations where there is excessive
steam or dust.

Do not place the TV on a bed, sofa, carpet, or in
a sealed cabinet to avoid blocking the product's
vents.

Install the outdoor antenna far from power trans­mission lines to avoid possible danger.

Remove the power cord and antenna connector
when there is a storm or when the TV is not in
use for a long period to avoid electric shock from
lightning.

13

Operation

Maintenance

This product is designed for power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.

The plug can be inserted into an outlet in only
one direction. Notify a qualified service techni­cian if you cannot plug it in correctly.

If there is any problem that cannot be resolved
according to the instructions given in this man­ual, notify a qualified service technician immedi­ately . Do not a ttempt any methods not covered in
this manual.

Do not attempt to repair the TV by yourself.
Notify a qualified service technician. Ask the ser­vice technician to complete a safety inspection
before switching the power on after completing
any maintenance.

V

14

FCC Compliance Statement

1

This device complies with part 15 of the FCC Rules. Operation is sub­ject to the following two conditions: (1) This device may not cause harm­ful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These lim­its are designed to provide reasonable protection against harmful inter­ference in a residential installation. This equipment generates, use s and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter­mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Warning: A shielded-type power cord is required in order to meet FCC
emission limits and also to prevent interference to nearby radio and tele­vision reception. It is essential that only the supplied power cord be
used. Use only shielded cables to connect I/O devices to this equip­ment. You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.

1. applies only to products purchased in the United States of America

Regulatory Information

5

15

DOC Compliance Notice

1

This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.

CE Conformity Statement

2

This device complies with the requirements set out in the Council Direc­tive on the approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (89/336/EEC) and the Amendment Direc­tive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amend­ment Directive (93/68/EEC).

1. applies only to products purchased in Canada

2. applies only to products purchased in the European Union

16

Thank you for purchasing this
Liquid Crystal Display TV. Your
LCD TV is designed to be safe,
versatile, and easy to use. The
design of the product is based on
Tasmanian Devil, which makes it
a fun addition to any room.

Y ou can watch broadcast or cab le
television channels, and easily
connect a VCR, VCD or DVD
player to the standard RCA and
S-Video input port s located at the
rear of the unit.

Convenient control buttons
located on the front panel let you
change channels, adjust the vol­ume, and change display settings
through an easy-to-use on-screen menu system. The built-in stereo
speakers provide full rich sound and a convenient audio output port
lets you connect to an external audio system or headphones.

Features

• 9.6-inch color TFT LCD TV

• Safe, sturdy construction

• Built-in TV tuner

• Audio/video support:
– Stereo audio inputs
– Composite video inputs
– S-Video input
– 3.5 mm stereo headphone output

• On-Screen Display (OSD) menu system

• MTS bilingual channel support

• Built-in 2W+2W speakers

ch

v

o

l

vol

tv/av

ch

M

E

N

U

Introducing the TV

6

17

Make sure the following components are included in the box. Conta ct
your vendor immediately if anything is missing or damaged.

Wire Material Package

G

W

A

1

8

3

0

0

V

8

0

C

V

W

-

1

E

7

7

8

7

4

Power Cord Power Adapter

4-IN-1 Cable

RCA Jack x 3

S Jack x 1

Warranty and Service

W

a

r

ranty and servic

e

m

anual

Manual

User’s Manual Quick Start Guide

Quick Start

Guide

User's M

anual

TV

Checking P ackage Contents

7

18

Fr o n t Vi e w

Description Function

1 Menu

Turns the On-Screen Display (OSD)
menus on and off.

2 Select channel

Changes the channel. Press CH U to
increase the channel number . Press CH

V

to decrease the channel number.

3 Adjust volume

Press VOL + to increase the volume.
Press VOL – to decrease the volume.

4 TV/AV

Selects the input source to be displayed

(TV, AV1, or AV2).
5 Power Turns the TV on and off.
6 Power LED Green LED indicates power on.
7 Signal sensor Receives signals from the remote control.
8 Stereo Speakers Play audio content.

MENU

ch

ch

ch

ch

vol

vol

MENU

vol

tv/av

tv/av

vol

1

2
3

4
5

6
7

88

Getting to Know Your TV

8

19

Input and Output Por ts

Description Function

1 Headphone line out

Connects to headphones or other
audio device.

2

Left and right audio in
(AV1)

Connects to VCR/VCD/DVD player
CVBS RCA left and right audio
cables (white and red).

3 Video in (AV1)

Connects to VCR/VCD/DVD player
CVBS RCA video cable (yellow).

4 AV2

Connects to the included 4-IN-1
cable.

5 DC-IN

Connects to the included power
adapter.

6

Antenna/cable TV
line in

Connects to an antenna or CATV
cable television line.

4

4

1
2

3
4

5

6

Open the cover before
connection the cable.

20

Notes:

• The operational distance is shortened when the signal sensor on
the TV is directly exposed to strong light.

• Protect the remote control from shock and vibration to avoid
damage.

• Do not place the remote control in hot or humid locations.

• Aim the transmitter on the remote contr ol at the signal sensor on
the TV and ensure there are no obstacles between them.

• Periodically check to ensure that the rubber screw covers on the
rear of the TV are secure; do not allow them to fall out as they
may pose a danger to small childr en .

Signal Sensor

Rubber screw cover

21

Inser ting the TV into the TV stand

MENU

ch

ch

vol

tv/av

vol

B

MENU

ch

ch

vol

tv/av

vol

C

A

Slide the TV into the mouth
in the direction of the arrow.
(B)(C)

Align the TV with the
mouth as shown. (A)

22

Connecting to an Antenna/Cable TV

1. Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT

Jack (VHF/UHF IN Jack) on the back of the TV.

2. Connect the other end of the VHF/UHF (Antenna) or CATV cable to

the Antenna socket or CATV cable.

Note
If you cannot receive channels after connecting an antenna or cable TV

line, try scanning for channels. See “Auto Program” on page 46.

4

4

Antenna

ANT jack

Antenna/CATV socket

Antenna/CATV

coaxial cable

(VHF/UHF IN jack)

Getting Started

9

23

Connecting to AV Devices

Connect external devices such as VCD/DVD players or VCRs to the
TV using the AV1 and AV2 ports on the back of the TV.

Connecting to a VCR, VCD or DVD Player

The illustration presented here shows how to connect your TV to a
VCR, VCD or DVD player. Actual connections vary according to the
make and model of the device.

Note
The cables are color-coded (black, red, white, yellow). Connect each color-

coded cable to the appropriate connector on your device.

BRWY

4

4

4-IN-1 cable

VCR

DVD

VCD

AV2

AV

connectors

S-Video

connector

24

Connecting to a Video Camera

The illustration presented here shows how to connect your TV to a
camcorder or other type of digital camera. Actual connections vary
according to the make and model of the device.

Note
The cables are color-coded (black, red, white, yellow). Connect each color-

coded cable to the appropriate connector on your device.

4

4

WB

S

B

R

W

Y

4-IN-1 cable

AV connectors

AV2

S-Video

connector

25

Connecting External Speakers and Headphones

Headphones or external speakers may be used to listen to the TV
instead of the built-in speakers. Connect your headphones to the
speaker/headphone line out port as illustrated.

Notes

• External speakers or headphones are not included with the product.

• The internal TV speakers will not output sound when headphones are
plugged in.

• Use external speakers with amplifiers only.

4

4

Speaker/Headphone

line out

Headphones

Speakers

26

Connecting the Power Adapter

1. Connect the power cord to the power adapter as illustrated.

2. Plug the power adapter connector into the DC-IN on the rear panel of

the

TV.

3. Insert the three-pronged plug at the other end of the power cord into

a power outlet.

Refer to the “Power Supply Safety Notes” on page 6.

4

4

DC-IN

AC power adapter

Power outlet

Three-pronged plug

Power cord

27

Using the Remote Control

For best results, use the remote control within a dist ance of 5 meters
from the front of the TV’s signal sensor. Do not exceed an angle of 3 0
degrees when pointing at the signal sensor. Refer to the following
illustration.

c

h

v

o

l

v

o

l

t

v

/

a

v

c

h

MEN

U

3m

30

5m

3m

303030

Using the TV

10

28

Turning the TV On and Off

1. Press the POWER button; the

power indicator LED changes
from red to green, indicating
that the power has been
turned on.

2. Press the POWER button

again; the power indicator LED changes from green to red,
indicating that TV is in standby (off) mode.

Selecting Channels

Press CH UP and CH DOWN on
the control panel to select the
channel or enter the specific
channel number by pressing the
number buttons on the remote
control.

Power button

Channel down

Channel up

29

Switching Source Signals

Press the SOURCE button on the
remote control or the

TV/AV button

on the control panel to select the
incoming source signal.

The current source setting CH xx
appears on the top left corner of the
screen; AV1or AV2 appears on the
bottom right corner of the screen.

Note:

The TV supports S-Video input in addition to normal video and audio sig­nals. The TV detects the signal type automatically and gives priority to S­video when two signals are detected at the same time. This auto detection
function is only available for AV2.

Adjusting the Volume

Press the VOL UP button to increase
the volume. Press the

VOL DOWN

button to decrease the volume. The
volume level is displayed on the TV.

Press the

MUTE button on the

remote control to turn the sound off.
The word “Mute” appears on the top
left corner of the screen and sound
is temporarily turned off.

Press the MUTE button on the
remote control or press the VOL UP
button or VOL DOWN button to
restore the original volume.

CH 40

AV

MENU

ch

ch

vol

tv/av

vol

TV/AV

Channel source setting

TV/AV

Volume upVolume down

Mute

30

The On-Screen Display (OSD) menu system provides a quick and
simple method to adjust your TV’s settings. This chapter describes
how to change each of the available settings.

The OSD can be used with either the remote control or the front con­trol panel.

The following sections explain how to adjust settings in the OSD
menus with control panel.

Button Description Control Panel

MENU MENU

CH UP CH U

CH DOWN CH V

ENTER MENU

OSD Setting Menus

Press the MENU button to enter
OSD Main Menu screen.

The Main Menu appears.

Main

Menu

ETC

BrightnessBrightness

3030

Adjusting On-Screen Display (OSD)
Settings

11

31

Brightness

1. Press MENU to enter the OSD

menus.

2. Press the CH UP button or CH DOWN

button to select Brightness.

3. Press MENU. The brightness slide

bar is highlighted.

4. Press the CH UP button to increase

the brightness.

5. Press the CH DOWN button to

decrease the brightness.

6. Press MENU to confirm the setting

and return to the Main menu.

Main

Menu

ETC

BrightnessBrightness

3030

6060

00

Note

The new setting is confirmed automatically
when the OSD times out.

MAX MID MIN

BRIGHTNESS 60 30 0

32

Contrast

1. Press MENU to enter the OSD

menus.

2. Press the CH DOWN button or CH UP

button to select Contrast.

3. Press MENU. The contrast slide bar

is highlighted.

4. Press the CH UP button to increase

the contrast.

5. Press the CH DOWN button to

decrease the contrast.

6. Press MENU to confirm the setting

and return to

the Main menu.

Main

Menu

ETC

ContrastContrast

3030

6060

00

Note

The new setting is confirmed automatically
when the OSD times out.

MAX MID MIN

CONTRAST 60 30 0

33

Video Setting

Press the MENU button to enter
OSD Main Menu screen.

1. Press the CH D OWN button o r

CH UP button

to select Video

Setting.

2. Press MENU to enter the

Video Setting menu.

Video

Setting

Hue

G

B

R

G R

34

Hue

1. Press the CH DOWN button or CH UP

button to select Hue.

2. Press MENU to enter the Hue sub-

menu.

3. Press the CH UP button to increase

green and decrease red.

4. Press the CH DOWN button to

decrease green and increase red.

5. Press MENU to confirm the setting

and return to the Video Setting menu.

Video

Setting

Hue

G

B

R

G R

G R

G R

Note

The new setting is confirmed automatically
when the OSD times out.

35

Saturation

1. Press the CH DOWN button or CH UP

button to select Saturation.

2. Press MENU to enter the Saturation

submenu.

3. Press the CH UP button to increase

the saturation.

4. Press the CH DOWN button to

decrease the saturation.

5. Press MENU to confirm the setting

and return to the Video Setting menu.

Video

Setting

Saturation

G

B

R

127127

255255

00

Note

The new setting is confirmed automatically
when the OSD times out.

MAX MID MIN

SATURATION 255 127 0

36

Sharpness

1. Press the CH DOWN button or CH UP

button to select Sharpness.

2. Press MENU to enter the SHARP-

NESS submenu.

3. Press the CH UP button to increase

the sharpness.

4. Press the CH DOWN button to

decrease the sharpness.

5. Press MENU to confirm the setting

and return to the Video Setting menu.

Video

Setting

Sharpness

G

B

R

Note

The new setting is confirmed automatically
when the OSD times out.

37

Color Temperature

1. Press the CH DOWN button or CH UP

button to select Color Temp.

2. Press MENU to enter the Color Tem-

perature submenu. There are three
default color temperatures to choose
from.

Standard Color

Press the CH DOWN button or CH UP
button to select Standard, then press

MENU.

Warm Color

Press the CH DOWN button or CH UP
button to select Warm, then press

MENU.

Cold Color

Press the CH DOWN button or CH UP

button

to select Cold, then press

MENU.

Video

Setting

Color Temp.

G

B

R

Standard

Color Temp.

Warm

Color Temp.

Cold

Color Temp.

38

Audio Setting

Press the MENU button to enter
OSD Main Menu screen.

1. Press the CH D OWN button o r

CH UP button

to select Audio

Setting.

2. Press MENU to enter the

Audio Setting menu.

Main

Menu

ETC

Audio Setting

39

Treble

1. Press the CH DOWN button or CH UP

button to select Treble.

2. Press MENU to enter the treble sub-

menu.

3. Press the CH UP button to increase

the treble.

4. Press the CH DOWN button to

decrease the treble.

5. Press MENU to confirm the setting

and return to the Audio Setting menu.

TRE

TRE

BASS

BASS

TrebleTreble

Audio Setting

Note

The new setting is confirmed automatically
when the OSD times out.

40

Bass

1. Press the CH DOWN button or CH UP

button to select Bass.

2. Press MENU to enter the Bass sub-

menu.

3. Press the CH UP button to increase

the bass.

4. Press the CH DOWN button to

decrease the bass.

5. Press MENU to confirm the setting

and return to the Audio Setting menu.

TRE

TRE

BASS

BASS

BassBass

Audio Setting

Note

The new setting is confirmed automatically
when the OSD times out.

41

Balance

1. Press the CH DOWN button or CH UP

button to select Balance.

2. Press MENU to enter the Balance

submenu.

3. Press the CH DOWN button to shift

the balance to the left speaker.

4. Press the CH UP button to shift the

balance to the right speaker.

5. Press MENU to confirm the setting

and return to the Audio Setting menu.

Audio Setting

TRE

TRE

BASS

BASS

BalanceBalance

L

R

L

L

R

R

L

L

R

R

Note

The new setting is confirmed automatically
when the OSD times out.

42

Mute

1. Press the CH DOWN button or CH UP

button to select Mute.

2. Press MENU to enter the Mute sub-

menu.

3. Press the CH UP button to turn the

mute off.

4. Press the CH DOWN button to turn

the mute on.

5. Press MENU to confirm the setting

and return to the Audio Setting menu.

Audio Setting

TRE

TRE

BASS

BASS

MuteMute

OffOn

Audio Setting

TRE

TRE

BASS

BASS

MuteMute

OffOn

Note

The new setting is confirmed automatically
when the OSD times out.

43

Note
The setting menu is available when the current select source is TV.

TV Setting

Press the MENU button to enter
OSD Main Menu screen.

1. Press the CH D OWN button o r

CH UP button to select TV

Setting.

2. Press MENU to enter the TV

Setting menu.

Main

Menu

ETC

TV Setting

44

TV/CATV

1. Press the CH DOWN button or CH UP

button to select TV/CATV.

2. Press MENU to enter the TV/CATV

submenu.

Receiving Cable TV

Press the CH UP button to select CATV,
then press MENU.

Receiving Broadcast TV

Press the CH DOWN button to select
TV, then press MENU.

TV

Setting

TV/CATV

TVTV CATV(STD HRC IRC)

AM

+

-

CH

TV

Setting

TV/CATV

TV CATV(STD HRC IRC)

AM

+

-

CH

TV

Setting

TV/CATV

TV CATV(STD HRC IRC)

AM

+

-

CH

Note

The default TV setting is “CATV”.

45

MTS

1. Press the CH DOWN button or CH UP

button to select MTS.

2. Press MENU to enter the MTS sub-

menu. Select from the following
options.

MAIN

Press the CH DOWN button or CH UP
button to select MAIN. A green dot
appears and MAIN is highlighted in yel

­low. Press MENU again to confirm the
selection.

SAP

Press the CH DOWN button or CH UP
button to select SAP. Press MENU again
to confirm the selection. If a green dot
does not appear, then your service pro

­vider doesn’t support SAP.

DUAL

Press the CH DOWN button or CH UP
button to select DUAL. Press MENU
again to confirm the selection. One
speaker plays the main audio signal and
the other speaker plays the alternate
audio signal.

TV

Setting

MTS

MAIN SAP DUAL

AM

+

-

CH

TV

Setting

MTS

MAIN SAP DUAL

AM

+

-

CH

TV

Setting

MTS

MAIN SAP DUAL

AM

+

-

CH

TV

Setting

MTS

MAIN SAP DUAL

AM

+

-

CH

46

Auto Program

1. Press the CH DOWN button or CH UP

button to select Auto Program.

2. Press MENU to enter the Auto Pro-

gram Setting submenu.

3. Press the CH DOWN button or CH UP

button to select ON or OFF and press
MENU.

The screen shows “Auto Program...” and
the channel indicator increments from 2
to 69 (ANT connection) or from 1 to 125
(CATV cable connection).

The screen displays the first channel
that is successfully found after scanning
is complete.

TV

Setting

Auto Program

ONON OFF

AM

+

-

CH

TV

Setting

Auto Program

ONON OFF

AM

+

-

CH

A

uto Program...

CH. 12

47

Manual Program

1. Press the CH DOWN button or CH UP

button to select “Manual Program”.

2. Press MENU to enter the Manual Pro-

gram submenu.

3. Press the CH DOWN button or CH UP

button to find the channel you want to
add.Press MENU to select the chan

-

nel.

4. Press MENU to exit, and then access

Channel Add/Erase function to add

a desired channel.

TV

Setting

Manual Program

DOWNDOWN

CH. 4CH. 4

UP

AM

+

-

CH

TV

Setting

Manual Program

DOWNDOWN

CH. 10CH. 10

UP

AM

+

-

CH

48

Channel Add/Erase

1. Select the channel you want to add or

delete, for example, Channel 28.

2. Press the CH DOWN button or CH UP

button to select CH. Add/Erase.

3. Press MENU to enter the Channel

Add/Erase submenu. Select from the
following options.

Add Channel

1. Press the CH DOWN button or CH UP

button to select Add.

2. Press MENU to add the selected

channel.

Erase Channel

1. Press the CH DOWN button or CH UP

button to select Erase.

2. Press MENU to delete the selected

channel.

When you return to the normal TV
screen and use the CH DOWN

or CH UP
buttons to browse channels, the deleted
channel (for example, Channel 28) will
be skipped automatically.

TV

Setting

CH. Add/Erase

EraseErase

CH. 7CH. 7

Add

AM

+

-

CH

Note

Y ou can still access the deleted channel by
entering the channel number using the
number buttons on the remote contro l.
Add the channel again if it was erased acci­dentally.

49

Favorite Channels

1. Press the CH DOWN button or CH

UP button to select Favorites CH.

Edit.

2. Press MENU to enter the Favorites

CH. Edit submenu.

3. The scre en displays the four favorite

channels: M1, M2, M3, and M4.

4. Press the CH DOWN button or CH

UP button to select the channel

number you want to set for M1.
Press MENU to confirm the setting
and move to the next favorite chan

-

nel, M2.

5. Repeat step 4 for M2, M3, and M4.

TV

Setting

Favorites CH. Edit

AM

+

-

CH

M1

10 10 10 10

M2 M3 M4

Exit

TV

Setting

Favorites CH. Edit

AM

+

-

CH

M1

18 10 10 10

M2 M3 M4

Exit

TV

Setting

Favorites CH. Edit

AM

+

-

CH

M1

10 61 10 10

M2 M3 M4

Exit

Note

Access your favorite channels in TV
mode by pressing the CH DOWN button
or CH UP buttons to switch between M1,
M2, M3, and M4. This function is only
available on the TV source.

50

Miscellaneous Setting

Press the MENU button to enter
OSD Main Menu screen.

1. Press the CH D OWN button o r

CH UP button

to select Mis-

cellaneous Setting.

2. Press MENU to enter the Mis-

cellaneous Setting menu.

Main

Menu

ETC

MiscellaneousMiscellaneous

51

Language

1. Press the CH DOWN button or CH UP

button to select Language.

2. Press MENU to enter the Language

submenu.

3. The screen displays the available

OSD languages: English and
T-Chinese (Traditional Chinese).

4. Press the CH DOWN button or CH

UP button to select a language. The

OSD language changes as soon as
you select a language.

5. Press MENU to confirm your choice.

Miscellaneous

LanguageLanguage

CH

EnglishEnglish T-ChineseT-Chinese

ጵ!!!!!!!

!!!!!!!

ٽ

፿ߢᙇᖗ፿ߢᙇᖗ

CH

૎፿૎፿ ᜗᧯խ֮᜗᧯խ֮

Note

The default language setting is Traditional
Chinese.

52

Sleep Timer

The sleep timer turns the TV off automatically after a set period of
time.

1. Press the CH DOWN button or CH UP

button to select Sleeper.

2. Press MENU to enter the Sleeper

submenu.

3. The screen displays the available

sleep timer setting: Off, 30, 60, 90,
and 120 minutes.

4. Press the CH DOWN button or CH UP

button to select a value.

5. Press MENU to confirm your choice.

Miscellaneous

SleeperSleeper

CH

off 30 9060 120

Miscellaneous

SleeperSleeper

CH

off 30 9060 120

53

OSD Display

This setting allows you to set the amount of information that app ears
on the LCD screen when the

DISPLAY button is pressed. You can

choose from three settings: Off, Portion, or All.

1. Press the CH DOWN button or CH UP

button to select OSD Display.

2. Press MENU to enter the OSD Dis-

play submenu.

3. The screen displays the available

sleep timer settings: All, Portion, or
Off.

4. Press the CH UP button or CH DOWN

button to select “All”, “Portion”, or
“Off”.

5. Press MENU to confirm your choice.

Miscellaneous

OSD DisplayOSD Display

CH

All Portion Off

54

Time Setting

This section shows you how to change your TV’s clock setting.

1. Press the CH DOWN button or CH UP

button to select Time Setting.

2. Press MENU to enter the Time Sett ing

submenu.

3. The screen displays the current set-

ting. The hour is highlighted in yellow.

4. Press the CH DOWN button or CH UP

button to adjust the hour setting, then
press MENU.

5. The minutes are highlighted in yellow.

Press the CH DOWN button or CH
UP button to adjust the minute set-

ting.

6. Press MENU to confirm the new time

setting.

Miscellaneous

Time SettingTime Setting

CH

22 01:

Miscellaneous

Time SettingTime Setting

CH

18 01:

Miscellaneous

Time SettingTime Setting

CH

18 35:

55

Reset

The Reset function returns all of your TV’s user settings to their fac­tory defaults.

Warning:

The reset function erases all of your custom and favorite channel set­tings, and will reset all display settings (such as contrast, brightness,
etc.) to the factory default values. The reset function cannot be
reversed once it begins.

Exit

Exit turns off the OSD menus and returns you to TV mode.

1. Press the CH DOWN button or CH UP

button to select Reset.

2. Press MENU to enter the Reset sub-

menu.

3. Press the CH DOWN button or CH UP

button to select “Yes” or “No”. By
default, “No” is already selected
(highlighted in yellow).

4. Press MENU to confirm your choice.

1. Press the CH DOWN button or CH UP

button to select Exit.

2. Press MENU to exit the OSD menus.

Miscellaneous

ResetReset

CH

YesYes

NoNo

Main

Menu

ETC

ExitExit

56

Turn the power off before you begin cleaning the
TV.

Use a clean lens cloth to remove dust and finger­prints from the screen.

Do not wipe the shell of the TV with alcohol,
methanol, gasoline or oil products to avoid the
damaging the finish. Wipe the shell with a dry
soft cloth and use neutral cleaning fluids.

If your model has leather components, wipe the
leather parts with a dry cloth and keep the area
dry. Place the TV far from sources of steam to
avoid making the leather wet.

Be careful to remove the power plug correctly.
Hold the plug instead of pulling the power cord.

Arrange the power cord with other cords to avoid
knotting or bending which may cause fire due to
damage or electric leakage.

GAS

OIL

T aking Care of Y our TV

12

57

Situation Solution

No picture and sound.

• Connect the power cord properly.

• Press the POWER button on the control panel or
remote control.

• Press the TV/AV button to cycle through connected
video sources.

• Press CH UP or CH DOWN to switch to other TV
stations.

• Check the TV/CATV OSD settings. See “TV/CATV”
on page 44.

• Make sure all cables are connected properly.

No picture, or poor picture,
sound is OK.

• Check the ANT and cable connections.

• Adjust the brightness in the OSD menus. See
“Brightness” on page 31.

Picture is not in color.

• Adjust the saturation in the OSD menus. See “Satu­ration” on page 35.

Picture is OK, no sound.

• Press the VOL UP button on the control panel or
remote control.

• Make sure the MTS option is set to Main or Dual.
See “MTS” on page 45.

One of the speakers has no
sound.

• Adjust the balance in the OSD menus. See “Bal­ance” on page 41.

Can’t receive some TV chan­nels using cable TV.

• Try the Auto Program function in the OSD “TV Set­ting” menu. See “Auto Program” on page 46.

Want to reset TV settings.

• Use the Reset function in the OSD “Miscellaneous”
menu. See “Reset” on page 55.

Cannot operate menus.

• If OSD items are colored light blue, the system is in
a state such that those settings are not available.
For example, video setting is available in TV mode.

No image but have sound.

• Make sure the video signal cable is connected

properly.

T roubleshooting

13

58

No sound but have image.

• Make sure the source device is functioning properly.

• Set the volume to a higher level.

• Make sure the audio cable is connected securely.

• Turn the mute off.

Screen image turns over.

• Make sure the video signal cable is connected

properly.

Snow appears on the screen.

• Adjust the location of the ANT, placing it far from
roads or sources of interference.

• Check the ANT and the video signal line connec­tions.

Blurred or overlapped images.

• Readjust the sharpness setting.

• Choose programs with high quality signals.

• Adjust the direction of the ANT or change the video
signal cable.

59

Item Specifications

WT08-10A1
LCD Panel Size 9.6-inch TFT
Aspect Ratio 4:3
Best Resolution 800 (horizontal) x 600(vertical)
Maximum Display Area 246.0 mm (H) x 184.5 mm (W)
TV System NTSC

Video System

AV1: CVBS RCA jack

AV2: S-Video or CVBS: 10-pin mini-DIN

Audio System

(Input) AV1: RCA left & right jacks

(Input) AV2: RCA left & right jack on 10-pin mini-DIN

(Output) 3.5mm ø headphone jack
Built-in Speakers 2W + 2W
Power Supply

100~240 V,AC, 50/60 Hz adapter, 12V DC
Power Consumption

40W (Average)
Power Consumption (Standby) 5W max. (at 110Vac/60Hz)
Optional Accessories External Speakers
Weight (including base) 1.95 kg
Dimensions (including base) 242 mm (H) x 367 mm (W) x 74 mm (D)

14

Specifications

60

Aspect Ratio The ratio of width to height of a film, image or display screen.
Broadcast TV Broadcasting video signals using high-frequency electromagnetic

waves to distribute television channels to viewers (standard TV broadcast).

CATV Community Antenna Television, the original name for cable TV. A television

distribution system that uses coaxial cable instead of the traditional radio broad­casting (over-the-air) method to deliver television, FM radio, and other services to
consumers.

Color Temperature Adjusting the color temperature enables you to set the inten-

sity of white light. Color temperature is measured in Kelvin (K). Higher color tem­peratures result in a blue tint. Lower temperatures result in a red tint.

Hue Colors in a color system are measured by hue, saturation and luminance.

Hue indicates the predominant color.

LCD Liquid Crystal Display. A display technology that uses rod-shaped molecules

(liquid crystals) that flow like liquid and bend light.

MTS Multi-channel Television Sound. Enables reception of audio other than the

primary (MAIN) audio signal. DUAL enables reception of a stereo audio signal,
while SAP (Second Audio Program) enables reception of a separate channel that
may be a different language or completely different information such as the news.

RCA connector An RCA or phono connector is a plug and socket for a two-wire

(signal and ground) coaxial cable that is widely used to connect audio and video
components. RCA sockets are commonly found at the rear of A/V equipment.

RCA jack An RCA jack enables you to attach the 4-IN-1 cable to a device socket.

Refer to “Checking Package Contents” on page 17.

SAP Used with SAP and NTSC, enables broadcast of the main broadcast signal on

one speaker, and the alternate audio speaker on the other speaker.

Saturation Chromatic purity indicating the amount of white contained in a color.

Fully saturated colors are pure colors; less saturated colors appear as pastel
shades.

S-Video Super-video, a video cabling standard used to transmit video by keeping

brightness (Y) and color information (C) on separate channels. Most often used with
camcorders, VCRs, and quality receivers and amplifiers to provide sharper pictures.

VCD A compact disk format developed in 1993 by Sony and Philips to capture full-

motion video. A standard Video CD can hold 74 minutes of near VHS-quality video
and CD-quality sound.

15

Glossary