HANNSpree ST91-23U1 Quick Start Guide
Quick Start Guide
ST91-23U1 23" Liquid Crystal Display TV
This guide is designed as a reference to help you start using your LCD TV quickly.Please refer to the User's Manual for more detailed installation and safety instructions.
Front ViewFront View
Speaker Speaker
Power
Remote
IR sensor
AV4
S-VIDEO
AUTO
VIDEO L R
AUTO
S-VIDEO
AV4
VIDEO L R
SOURCE MENU MUTE
SOURCE MENU MUTE
AV4
Source
Menu
Select
channel
Mute/Auto
Adjust
volume
You can adjust the screen vertically up to
10 degrees.
Earphone
line out port
(3.5 mm stereo)
Rear ViewRear View
Flashcard
slot - AV5
DVI LINE IN
Back cover
Open the back cover by pulling it down.
LINE IN
LINE OUT
R L R L R L VIDEO S-VIDEOYPR PB
AV 1 AV 2
AV1LINE OUTDVI-D
AV 3
R L VIDEO ANT DC-IN
AV2 AV3
Antenna/
Cable TV line in
DC-IN
Please note that you cannot adjust the screen
horizontally with this model.
Making Connections
Connecting to Antenna/Cable TV/ PC
PC
DVI LINE IN
LINE OUT
R L R L R L VIDEO S-VIDEOYPR PB
AV 1 AV 2
AV3
AV 3
R L VIDEO ANT DC-IN
connector
Audio
Antenna
ANT Jack
(VHF/UHF
IN Jack)
Antenna/CATV
coaxial cable
L VIDEOR
Video
connector
A/V and Channel Setup
Watching Broadcast or Cable TV
1. After you have made the appropriate power and source connections, press
the power button to turn on your television
2. Press the SOURCE button to select TV.
3. Press the MENU button on the
control panel to enter the OSD menu.
4. Use the CH or button to select the " TV ".
5. Press the VOL or button to enter " TV MENU ".
6. Use the CH or button to select " TV/CATV ".
7. Press the VOL or button to select TV (broadcast TV) or CATV (cable TV).
Selecting A/V Sources
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
2. Press SOURCE key on the control panel
to select different source signals.
The TV/CATV channel number, PC or
AV1 ~ AV5 appears on the screen.
SOURCE MENU MUTE
TV/CATV
PC
AV1
AV2
AV3
AV4
AV5
SOURCE MENU MUTE
AUTO
AV4
S-VIDEO
VIDEO L R
AUTO
Connecting the Power Adapter
1. Connect the power cord to the power
Power outlet
DVI LINE IN
LINE OUT
R L R L R L VIDEO S-VIDEOYPR PB
AV 1 AV 2
DC-IN
AV 3
R L VIDEO ANT DC-IN
Power cord
Power adapter
Copyright 2005, Hannspree California, Inc. All rights reserved.
adapter as illustrated.
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
Note : For information on connecting your
TV to a computer, refer to the user's
manual.
VCR
VCD
DVD
Auto Channel Setup
1. Press the MENU button to enter the OSD main menus.
2. Use the channel buttons on the control panel to select the " TV " menu.
3. Press the volume buttons to enter the " TV " menu.
4. Press the channel buttons to select " AUTO SCAN ". The current setting is shown in brackets.
5. Press the volume button to enable auto scanning.
6. Your television will begin automatically memorizing the available channels.
Auto Scan
TV
TV / CATV
MTS
AUTO SCAN
CH . ADD/ERASE
FAV. CHANNEL
RETURN
CATV
STEREO
OFF
ADD
MENU : CLOSE: SELECT : ADJUST
MAD-001163
Loading...