HANNspree K206-10A1 User Manual

2F, No.362, Rueiguang Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C.

TEL: [phone]

FAX: [phone]

www.hannspree.com

NTSCTVTWEN1203
MAC-001222

9.6" Liquid Crystal Display
Television

K206-10A1

User's Manual

Table of Contents

1. Warranty and Service .................................................... 3

2. Preface......................................................................... 4

3. Description of Warning Symbols ..................................... 5

4. Safety Notices............................................................... 6

5. Regulatory Information ................ ................................ 14

6. Introducing the TV....................... ................................ 16

Features ...... ............................................................ 16

7. Checking Package Contents ........................................ 17

8. Getting to Know Your TV ........................... .................. 18

Front View................. .............................................. 18

Input and Output Ports............................................. 19

9. Getting Started............................................................ 20

Connecting to an Antenna or Cable TV .................. ... 20

Connecting to AV Devices........ ................................ 21

Connecting to a VCR/VCD/DVD Player ................ 21

Connecting to a Video Camera ......................... ... 22

Connecting to a Game Device ............................. 23

Connecting External Speakers or Headphones .......... 24

Connecting the Power Adapter ................................. 25

10. Using the TV .............................................................. 26

Using the Remote Control ........................................ 26

Turning the TV On and Off ....................................... 27

Selecting Channels.................................................. 27

Adjusting the Volume . .............................................. 28

1

Table of Contents

11. Adjusting On-Screen Display (OSD) Settings ............... 29

Brightness............................................................... 30

Contrast .................................................................. 31

Video Setting......................................... .................. 32

Hue .................................................................... 33

Saturation......................................... .................. 34

Sharpness ............ .............................................. 35

Color Temperature ........................................... ... 36

Audio Setting......................................... .................. 37

Treble ................... .............................................. 38

Bass..................... .............................................. 39

Balance .............................................................. 40

TV Setting ............................................................... 41

TV/CATV .............. .............................................. 42

MTS ................................................................... 43

Auto Program ...................................................... 44

Manual Program .................................................. 45

Channel Add/Erase ............................................ 46

Miscellaneous Setting ............................ .................. 47

OSD Position ........ .............................................. 48

Language ........................................................... 49

Sleep Timer ........................................................ 50

OSD Display ....................................................... 51

Reset ................... .............................................. 52

12. Taking Care of Your TV ............................ .................. 53

Care and Maintenance of the TV .............................. 53

Care and Maintenance of the Animal Cover .............. 54

13. Troubleshooting.......................................................... 55

14. Specifications............................................................. 57

Standard Specifications for all Models ...................... 57

Model-specific Specifications ................................... 58

15. Glossary .................................................................... 60

2

1

Warranty and Service

The instructions in this manual are for the models listed under the
“Model-specific Specifications” on page 58 and 59. Before reading this
manual, check the product number on the rear of your TV.

Thank you for purchasing our Liquid Crystal Display Television (LCD
TV). With this product, you will be able to enjoy superior audio and

video while enriching your lifestyle with advanced technology.

This Hannspree TV is warranted for one year limited service from the
date the product is received (as shown on the Warranty and Service
Manual); please refer to the "Warranty and Service Manual" for detailed
warranty information.

Hannspree provides complete service information in the included "War­ranty and Service Manual", or directly from the Hannspree global cus­tomer service center. Our service representatives will be very happy to
serve you to your satisfaction.

Hannspree global customer service center telephone number:
From Taiwan please call 0800-008-800

The Hannspree e-mail address:
[e-mail]

3

2

Preface

This manual is designed to assist users in setting up and using the LCD TV.
Information in this document has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the contents. The
information in this document is subject to change without notice.

Copyright

© Copyright 2003 & 2004 Hannspree, Inc.
All rights reserved. This product and related documentation are pro-

tected by copyright and are distributed under licenses restricting their
use, copying, and distribution. No part of this documentation may be
reproduced in any form by any means without prior written authorization
of Hannspree, Inc., and its licensors, if any.

4

3

Description of Warning Symbols

Warning

This symbol is used to remind
users to pay attention to
important descriptions regard­ing usage and maintenance
(repair) or additional impor­tant information related to this
product.

This symbol is used to remind
users to pay attention to the
danger of electric shocks due
to dangerous internal non­insulated components.

Caution

Electric Power Notice

Electric power may cause personal injury and mechanical damage if it is
misused. Although safety has been taken into consideration during the
design and production of this product, electric shock or fire can result
when the product is misused. To prevent potential danger, follow the
instructions below when installing, operating and cleaning the product.
In addition, read the following “Safety Notices” carefully before using the
product to ensure that your TV is safe and long-lasting.

5

4

Safety Notices

Power Supply Safety Notes

1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this product's plug or leaves the
plug exposed.

2. This product has a 3-pin grounded plug. The third pin connects
to ground; do not remove it.

3. If the power cord or plug is damaged or worn, unplug it immedi­ately and contact a qualified service technician for mainte­nance.

4. To avoid fire or electric shocks, do not overload electric power
outlets.

Installation Safety Notes

Antenna

We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in
a location free from interference.

Location

Avoid allowing the TV to get prolonged exposure to sunlight or
other strong sources of heat. Leave sufficient distance between the
TV and the wall to provide enough space for the emission of heat.

6

Before You Proceed

1. Read the Safety Notices and the User’s Manual carefully
before turning the product on.

2. Keep your User’s Manual in a safe place for future reference.
Keep the box and packaging in case the product needs to be
shipped in the future.

3. Follow the product and warning label instructions.

4. Any changes or modifications that do not follow the instructions
in this manual will void this product's warranty.

Warning

To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.

Power

To avoid danger of fires or electric shock, make sure that you use a
proper adapter. The TV is compatible with the following adapters:

• EDAC POWER ELECTRONICS CO., LTD.: EA 1050E-120

• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240

7

Optimal Viewing Distance

102 cm

8

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

9. Do not defeat the safety purpose of the
polarized or grounding-type plug: A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.

9

10. Protect the power cord from being walked on
or pinched particularly at the plug, conve­nience receptacles, and the point where they
exit from the apparatus.

11. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

12. Only use attachments/accessories specified
by the manufacturer.

13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.

14. Refer all servicing to qualified service per­sonnel. Servicing is required when the appa­ratus has been damaged in any way , such as
if the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not oper­ate normally, or has been dropped.

10

Personal Safety

To avoid overloading the power supply, do not
plug too many electrical devices into an outlet or
extension cable.

Dangerous high-voltage electric power compo­nents are located inside the TV. To avoid electric
shock, do not disassemble the casing.

Do not place or drop metals, small objects, or
flammable materials in the vent to avoid an elec­tric shock or a fire.

If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and notify a qualified service technician.

If any fluid is sprayed or dropped into the TV,
remove the power plug immediately and notify a
qualified service technician.

The screen of the TV is made of glass, be care­ful to avoid hitting or scraping it. If the screen is
broken, avoid cutting yourself on the broken
glass.

Do not allow children to use the TV unattended
to avoid accidents caused by improper opera­tion.

11

Installation

To avoid damage to power circuits, do not place
the TV in locations where there is excessive
steam or dust.

Do not place the TV on a bed, sofa, carpet, or in
a sealed cabinet to avoid blocking the product's
vents.

Install the outdoor antenna far from power trans­mission lines to avoid possible danger.

Remove the power cord and antenna connector
when there is a storm or when the TV is not in
use for a long period to avoid electric shock from
lightning.

12

Operation

V

Maintenance

This product is designed for power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.

The plug can be inserted into an outlet in only
one direction. Notify a qualified service techni­cian if you cannot plug it in correctly.

If there is any problem that cannot be resolved
according to the instructions given in this man­ual, notify a qualified service technician immedi­ately . Do not attempt any methods n ot covered in
this manual.

Do not attempt to repair the TV by yourself.
Notify a qualified service technician. Ask the ser­vice technician to complete a safety inspection
before switching the power on after completing
any maintenance.

13

5

Regulatory Information

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is sub­ject to the following two conditions: (1) This device may not cause harm­ful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These lim­its are designed to provide reasonable protection against harmful inter­ference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter­mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

1

Warning: A shielded-type power cord is required in order to meet FCC

emission limits and also to prevent interference to nearby radio and tele­vision reception. It is essential that only the supplied power cord be
used. Use only shielded cables to connect I/O devices to this equip­ment. You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.

1. applies only to products purchased in the United States of America

14

DOC Compliance Notice

1

This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.

CE Conformity Statement

2

This device complies with the requirements set out in the Council Direc­tive on the approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (89/336/EEC) and the Amendment Direc­tive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amend­ment Directive (93/68/EEC).

1. applies only to products purchased in Canada

2. applies only to products purchased in the European Union

15

6

Introducing the TV

Thank you for purchasing this Liquid
Crystal Display TV. Your LCD TV is
designed to be safe, versatile, and
easy to use. The design of the product
is based on cute animals, such as the
elephant shown here, which makes it a
fun addition to any room.

You can watch broadcast or cable
television channels, and easily connect a VCR, VCD, or DVD player
or a game device to the standard RCA and S-Video input ports that
are included in the 4-IN-1 cable.

Convenient control buttons located on the front panel and a handy
remote control let you change channels, adjust the volume, and
change display settings through an easy-to-use on-screen menu
system. The built-in stereo speakers provide full, rich sound and a
convenient audio output port lets you connect to an external audio
system or headphones.

m

m

C

C
H

H

e

e
n

n

u

u

S

S
O

O

U

U

R

R
C

C

E

E

V

V

O

O

L

L

V

V

O

O

L

L

C

C

H

H

Features

• 9.6-inch color TFT LCD TV

• Safe and sturdy construction

• Built-in TV tuner

•4-IN-1 cable

• On-Screen Display (OSD) menu system

• Built-in 2W+2W speakers

16

G
W

A

1

8

3

0

0

V

8

0

C

V

W

-

1

E

7

7

8

7

4

7

Checking Pac kage Contents

Make sure the following components are included in the box. Co ntact
your vendor immediately if anything is missing or damaged.

TV

This is not a toy.
Please do not try to
drag or remove the
plush so as to avoid

moving the TV

CH

SOURCE

menu

VOL

VOL

CH

cover as this will
affect its operation.

User’s Manual Quick Start Guide

U

ser's M

anual

Quick Start

G

uide

Warranty and

Service Manual

Warranty and service

manual

Wire Material Package

Power Cord Power Adapter 4-IN-1 Cable RCA Jack x 3

17

8

Getting to Know Your TV

Front View

66

CH

menu

SOURCE

VOL

VOL

CH

CH

VOL

VOL

CH

Signal sensor

menu

12 3 4 5

Description Function

1 Menu

Turns the On-Screen Display (OSD)
menus on and off.

Changes channels. Press CHS to

2 Select channel

increase the channel number. Press CH
to decrease the channel number.

3 Adjust volume

4 Source

Power LED

5

/Power

Press VOL + to increase the volume.
Press VOL – to decrease the volume.

Selects the input source to be displayed
(TV/CATV, AV, or S-Video).

Green LED indicates power on.
Turns the TV on and off.

6 Stereo speakers Play audio content.

18

SOURCE

T

Input and Output Ports

DC 12V

123 4

Description Function

4-IN-1

DC 12V

HEADPHONE ANT

4-IN-1

HEADPHONE ANT

1 DC 12V

2 4-I N-1

3 HEADPHONE

4 ANT

Connects to the included power
adapter.

Connects to a VCR/VCD/DVD
player, CVBS RCA cables, or a
game device.

Connects to headphones or other
audio device.

Connects to an antenna or CATV
cable television line.

19

9

Getting Started

Connecting to an Antenna or Cable TV

1 Connect one end of the UHF or CATV cable to the ANT Jack

(VHF/UHF IN Jack) on the back of the TV.

2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to

the antenna socket or CATV cable.

Antenna

4-IN-1

DC 12V

HEADPHONE ANT

4-IN-1

DC 12V

HEADPHONE ANT

Antenna/CATV

socket

ANT jack

(VHF/UHF IN jack)

Antenna/CATV

coaxial cable

Note
If you cannot receive channels after connecting to an antenna or cable TV

line, try scanning for channels. See “Auto Program” on page 44.

20

Connecting to AV Devices

Connect external devices such as a VCR, VCD or DVD player, or
video game to the TV using the 4-IN-1 cable.

Connecting to a VCR/VCD/DVD Player

The illustration presented here shows how to connect the TV to a
VCR, VCD, or DVD player. Actual connections ma y vary according to
the make and model of the device. Refer to the user’s manual
included with the device for more detailed instructions.

VCR

VCD

4-IN-1

DC 12V

DC 12V

HEADPHONE ANT

4-IN-1

HEADPHONE ANT

BRWY

DVD

4-IN-1 jack

4-IN-1 cable

S-Video

connector

4-IN-1 cable

AV
connectors

Note
The cables are color-coded (black, red, white, yellow). Connect each color­coded cable to the appropriate connector on your device.

21

Connecting to a Video Camera

The instructions presented here are a general guide to connecting
the TV to a camcorder or other type of digital camera. Actual connec­tions may vary according to the make and model of the device. Refer
to the user’s manual included with the camcorder or camera for more
detailed instructions.

S

WB

4-IN-1

DC 12V

HEADPHONE ANT

4-IN-1

DC 12V

4-IN-1 jack

HEADPHONE ANT

S-Video
connector

B

R

W

Y

4-IN-1 cable

AV connectors

Note
The cables are color-coded (black, red, white, yellow). Connect each color­coded cable to the appropriate connector on your device.

22

Connecting to a Game Device

The instructions presented here are a general guide to connecting
the TV to a game device using the RCA Jacks provided (some game
devices may require a unique adapter that is not provided). Actual
connections may vary according to the make and model of the game
device. Refer to the user’s manual included with the game device for
more detailed instructions.

4-IN-1

DC 12V

HEADPHONE ANT

4-IN-1

DC 12V HEADPHONE ANT

BRWY

4-IN-1 jack

S-Video

connector

AV
connectors

4-IN-1 cable

4-IN-1 cable

Notes

• Connect the 4-IN-1 cable connectors to the corresponding conn ectors on
your game device adapter.

• If the 4-IN-1 cable does not fit the game device, then insert the included
RCA jack between the 4-IN-1 cable and the game device.

23

Connecting External Speakers or Headphones

External speakers or headphones may be used to listen to the TV
rather than using the built-in speakers. Connect external speakers or
headphones to the headphone line out port as illustrated.

Headphones

4-IN-1

DC 12V

HEADPHONE ANT

4-IN-1

DC 12V

HEADPHONE ANT

Speaker/Headphone

line out port

Speakers

Notes

• External speakers or headphones are not included with the product.

• The internal TV speakers will not output sound when headphones are
plugged in.

• Use external speakers with amplifiers only.

24

Connecting the Power Adapter

1 Connect the power cord to the power adapter as illustrated.
2 Plug the power adapter connector into the DC-IN input jack on the

rear panel of the TV.

3 Insert the three-pronged plug at the other end of the power cord into

a power outlet.

Power outlet

Three-pronged
plug

4-IN-1

DC 12V

HEADPHONE ANT

4-IN-1

DC 12V

HEADPHONE ANT

DC-IN

DC-IN input jack

Power cord

Power adapter

25

10

Using the TV

Using the Remote Control

For best results, use the remote control within a dist ance of 5 me ters
from the front of the TV’s signal sensor . Do not exceed an an gle of 30
degrees when pointing at the signal sensor. Refer to the following
illustration.

3m

30

5m

30

3m

26

Turning the TV On and Off

1 Press the POWER button on the

control panel (or remote control).
The power LED changes from
dark to green, indicating that the
power has been turned on.

2 Press the POWER button again;

the power LED changes from
green to dark, indicating that the
TV is in off mode.

Selecting Channels

Press the CH UP button or CH
DOWN button on the control panel

to select the channel or enter the
specific channel number by press­ing the number buttons on the
remote control.

TV 10

menu

Power LED

menu

CH

SOURCE

VOL

VOL

CH

48

CH

SOURCE

VOL

VOL

CH

Channel up Channel down

27

Switching Source Signals

Press SOURCE on the control
panel to select the incoming
source signal.

The current source setting
(TV/CATV, S-Video, or AV)
appears on the top left corner of
the screen.

Note
The TV supports S-Video input in

addition to normal video and audio
signals.

Adjusting the Volume

Press the VOL UP button to
increase the volume. Press the
VOL DOWN button to decrease
the volume. The volume level is
displayed on the TV.

Press MUTE on the remote
control to turn the sound off.
Press MUTE on the remote
control or press VOL UP / VOL

DOWN to turn the sound on.

Current source setting

S-VIDEO

Volume level

48

CH

SOURCE

menu

VOL

VOL

CH

Source

48

CH

SOURCE

menu

VOL

VOL

CH

Volume

Volume down

up

28

ETO

11

Adjusting On-Screen Display (OSD)
Settings

The On-Screen Display (OSD) menu system provides a quick and
simple method to adjust your TV’s settings. This chapter describes
how to change each of the available settings.

The OSD can be used with either the remote control or the front con­trol panel.

Button Descriptions

Control Panel

MENU MENU

CH UP CH S

CH DOWN CH T

ENTER MENU

The following sections explain how to adjust settings in the OSD
menus using the control panel.

OSD Setting Menu

Main Menu

ETO

menu

Press the MENU button to enter

CH

VOL

VOL

CH

The Main Menu appears

the OSD menus.

Note
To exit the OSD menus at any time, press the CH UP button or CH DOWN

button to select Exit . Then press MENU to exit the OSD menus. Also,
after you finish setting OSD parameters, follow these instructions to exit

the OSD menus; alternatively, wait 15 seconds for the OSD to close auto­matically.

Video Setting

ENTER

29

Brightness

ETO

ENTER

Main Menu

Brightness

1 Press MENU to enter the OSD

ETO

menus.

2 Press the CH UP button or CH

50

DOWN button to select Brightness.

3 Press MENU. The brightness slide

bar appears.

4 Press the CH UP button to increase

the brightness.

5 Press the CH DOWN button to

decrease the brightness.

6 Press MENU to confirm the setting

and return to the Main Menu.

Notes

The new setting is confirmed automatically
when the OSD times out.

MAX MID MIN

BRIGHTNESS 100 50 0

30

Contrast

ETO

ENTER

Contrast

Main Menu

1 Press MENU to enter the OSD

ETO

menus.

2 Press the CH UP button or CH

50

DOWN button to select Contrast.

3 Press MENU. The contrast slide

bar appears.

4 Press the CH UP button to increase

the contrast.

5 Press the CH DOWN button to

decrease the contrast.

6 Press MENU to confirm the setting

and return to the Main menu.

Note

The new setting is confirmed auto matically
when the OSD times out.

MAX MID MIN

CONTRAST 100 50 0

31

Video Setting

ETO

menu

Main Menu

ETO

CH

VOL

VOL

CH

Video Setting

ENTER

Press the MENU button to enter
the OSD menus.

1 Press the CH UP button or CH

DOWN button to select Video

Setting.

2 Press MENU to enter the

Video Setting menu.

32

Hue

Video Setting

G

B

R

Hue

GR

50

ENTER

1 Press the CH UP button or CH

DOWN button to select Hue.

2 Press MENU to enter the Hue

menu.

3 Press the CH UP button to increase

the hue towards the red spectrum.
The image becomes more red.

4 Press the CH DOWN button to

decrease the hue towards the
green spectrum. The image
becomes more green.

5 Press MENU to confirm the setting

and return to the Video Setting
menu.

Note

The new setting is confirmed auto matically
when the OSD times out.

MAX MID MIN

HUE 100 50 0

33

Saturation

ENTER

Video Setting

G

R

B

Saturation

1 Press the CH UP button or CH

DOWN button to select Saturation.

2 Press MENU to enter the

50

Saturation menu.

3 Press the CH UP button to increase

the saturation. The screen image
becomes more vibrant.

4 Press the CH DOWN button to

decrease the saturation. The
screen image becomes less
vibrant.

5 Press MENU to confirm the setting

and return to the Video Setting
menu.

Note

The new setting is confirmed automati­cally when the OSD times out.

MAX MID MIN

34

SATURATION 100 50 0

Sharpness

R

G

B

ENTER

Video Setting

Sharpness

1 Press the CH UP button or CH

DOWN button to select Sharpness.

2 Press MENU to enter the

50

Sharpness menu.

3 Press the CH UP button to increase

the sharpness.

4 Press the CH DOWN button to

decrease the sharpness.

5 Press MENU again to confirm the

setting and return to the Video
Setting menu.

Note

The new setting is confirmed automatically
when the OSD times out.

MAX MID MIN

SHARPNESS 100 50 0

35

Color Temperature

R

G

B

ENTER

Video Setting

Color

1 Press the CH UP button or CH

DOWN button to select Color.

2 Press MENU to enter the Color

menu. The following three color
temperatures are available.

Standard Color

Press the CH UP button or CH DOWN
button to select Standard, then press

MENU.

Warm Color

Press the CH UP button or CH DOWN
button to select Warm, th en press

MENU.

Cold Color

Press the CH UP button or CH DOWN
button to select Cold, then press MENU.

36

Audio Setting

ETO

Ma in men u

EN TER

menu

ETO

CH

VOL

VOL

CH

Audio Setting

Press the MENU button to enter
the OSD menus.

1 Press the CH UP button or CH

DOWN

Setting.

button to select Audio

2 Press MENU to enter the

Audio Setting menu.

37

Treble

EN TER

Au dio Se tti ng

Treble

1 Press the CH UP button or CH

DOWN button to select Treble.

2 Press MENU to enter the Treble

48

menu.

3 Press the CH UP button to increase

the treble.

4 Press the CH DOWN button to

decrease the treble.

5 Press MENU to confirm the setting

and return to the Audio Setting
menu.

Note

The new setting is confirmed automati­cally when the OSD times out.

MAX MID MIN

Treble 100 50 0

38

Bass

EN TER

Au dio Se tti ng

Bass

1 Press the CH UP button or CH

DOWN button to select Bass.

2 Press MENU to enter the Bass

48

menu.

3 Press the CH UP button to increase

the bass.

4 Press the CH DOWN button to

decrease the bass.

5 Press MENU to confirm the setting

and return to the Audio Setting
menu.

Note

The new setting is confirmed automati­cally when the OSD times out.

MAX MID MIN

Bass 100 50 0

39

Balance

EN TER

Au dio Se tti ng

LR

Balance

50

1 Press the CH UP button or CH

DOWN button to select Balance.

2 Press MENU to enter the Balance

menu.

3 Press the CH DOWN button to shift

the balance to the left speaker.

4 Press the CH UP button to shift the

balance to the right speaker.

5 Press MENU to confirm the setting

and return to the Audio Setting
menu.

Note

The new setting is confirmed automatically
when the OSD times out.

MAX MID MIN

Balance R (100) 50 L (0)

40

TV Setting

ETO

menu

Main Menu

ETO

CH

VOL

VOL

CH

ENTER

TV Setting

Press the MENU button to enter
the OSD menus.

1 Press the CH UP button or CH

DOWN button

Setting.

to select TV

2 Press MENU to enter the TV

Setting menu.

41

TV/CATV

ENTER

ENTER

ENTER

TV

TV/CATV

TV

TV

TV/CATV

TV

TV

TV/CATV

TV

AUTO

SET

SET

SET

AUTO

AUTO

Setting

MENU

SET

CATV

Setting

MENU

SET

CATV

Setting

MENU

SET

CATV

1 Press the CH UP button or CH

Channel

-

+

DOWN button to select TV/CATV.

2 Press MENU to enter the TV/CATV

menu. The following choices are
available.

Receiving Broadcast TV

Channel

-

+

Press the CH UP button or CH DOWN
button to select TV, then press MENU.

Receiving Cable TV

Channel

-

+

Press the CH UP button or CH DOWN
button to select CATV (default), then
press MENU.

42

MTS

EN TER

TV

SA P DUA L

AUTO

SET

MENU

SET

Se tti ng

Channe l

+

-

MA IN

MTS

1 Press the CH UP button or CH

DOWN button to select MTS.

2 Press MENU to enter the MTS

menu.

ENTER

ENTER

ENTER

MAIN
1 Press the CH UP button or CH

DOWN button to select MAIN

(default). MAIN is highlighted in

MAIN

TV

MTS

Setting

AUTO

MENU

Channel

SET

SET

SAP DUAL

-

+

red.

2 Press MENU again to confirm the

selection.

SAP
1 Press the CH UP button or CH

DOWN button to select SAP. SAP is

highlighted in red.

MAIN

TV

MTS

Setting

AUTO

MENU

Channel

SET

SET

SAP DUAL

-

+

2 Press MENU again to confirm the

selection.

TV

Setting

AUTO

MENU

Channel

-

SET

SET

+

MTS

SAP DUAL

MAIN

DUAL
1 Press the CH UP button or CH

DOWN button to select DUAL.

DUAL is highlighted in red.

2 Press MENU to confirm the selec-

tion.

43

Auto Program

+

ENTER

AUTO

YES

TV:10

TV

AUTO

SET

Program

Channel
Indicator

CH

menu

VOL

VOL

CH

Setting

MENU

SET

SOURCE

1 Press the CH UP button or CH

Channel

-

NO

DOWN button to select Auto
Program.

2 Press MENU to enter the Auto

Program menu.

3 Press the CH UP button or CH

DOWN button to select Yes

or No.

4 Press MENU.

The screen goes blank and the chan­nel indicator values range from 2 to
69 (antenna connection) or from 1 to
125 (CATV cable connection).

The screen displays the first channel
that is successfully found after scan­ning is complete.

44

Manual Program

This function allows you to locate channels for adding to or erasing
from preset channels.

ENTER

TV

Manual

DOWN

AUTO

SET

Setting

MENU

Channel

SET

Program

Up

3

1 Press the CH UP button or CH

-

+

DOWN button to select Manual Pro­gram.

2 Press MENU to enter the Manual

Program menu.

3 Press the CH UP button or CH

DOWN button to find the channel

you want to add.

4 When you have found the channel,

press MENU.

45

Channel Add/Erase

Channel to be added or erased must be selected from Manual Pro­gram.

ENTER

Erase

TV

Setting

AUTO

MENU

SET

SET

CH.Add/Erase

3

1 Press the CH UP button or CH

Channel

-

+

Add

DOWN button to select CH.
Add/Erase.

2 Press MENU to enter the CH.

Add/Erase menu. Select one of the
following options.

Add Channel
1 Press the CH UP button to select

Add.

2 Press MENU to add the selected

channel.

Erase Channel
1 Press the CH DOWN button to

select Erase.

2 Press MENU to delete the selected

channel.

When you return to the normal TV
screen and use the
buttons to browse channels, the
deleted channel (for example,
Channel 3) is skipped automatically.

CH UP/CH DOWN

46

Note

You can still access the deleted channel by
entering the channel number using the
number buttons on the remote control.

Miscellaneous Setting

menu

CH

VOL

VOL

CH

Main Menu

ETO

Miscellaneous

ENTER

Press the MENU button to enter
the OSD menus.

1 Press the CH UP button or CH

DOWN button

Miscellaneous.

to select

2 Press MENU to enter the Mis-

cellaneous menu.

47

OSD Position

EN TER

OS D P osi tion

OSD

OSD

50

H -P o si t io n

ENTE R

OSD Pos itio n

OSD

ENTE R

OSD Pos itio n

OSD

OSD Position

H-Position

OSD

H-Position

OSD

V-Position

1 Press the CH UP button or CH

DOWN button to select OSD

Position.

50

2 Press MENU to enter the OSD

Position menu.

The following options are available.

Horizontal Position
1 Press the CH UP button or CH

DOWN button to select H. Position.

48

2 Press MENU.
3 Press the CH DOWN button to

move the OSD screen to the left.
Press the CH UP button

to move

the OSD screen to the right.

4 Press MENU to confirm the setting.
Vertical Position

1 Press the CH UP button or CH

DOWN button to select V. Position.

48

2 Press MENU.
3 Press the CH DOWN button to

move the OSD screen downward.
Press the CH UP button

to move

the OSD screen upward.

4 Press MENU to confirm the setting.

48

Language

OSD

Z

Z

Z

CH

OSD

Z

Z

Z

CH

ENTER

ENTER

Miscellaneous

Language

English

Miscellaneous

Language

English

ᕷᥟύЎ

ᕷᥟύЎ

1 Press the CH UP button or CH

DOWN button to select Language.

2 Press MENU to enter the Language

menu.
The screen displays the available
OSD languages: English and
T-Chinese (Traditional Chinese).

3 Press the CH UP button or CH

DOWN button to select a language.

4 Press MENU to confirm your

choice.

Note

The default language setting is Traditional
Chinese.

49

Sleep Timer

OSD

CH

EN TER

Mi sce lla neou s

OSD

CH

OF F

60

90

12 0

The sleep timer turns the TV off automatically after a set period of
time.

ENTER

Miscellaneous

OFF

Sleep

Z

Z

Z

Sleep

30

Z

Z

Z

30

1 Press the CH UP button or CH

DOWN button to select Sleep.

2 Press MENU to enter the Sleep

90

120

60

menu.

3 The screen displays the available

sleep timer setting:

–Off
– 30 minutes
– 60 minutes
– 90 minutes
– 120 minutes

4 Press the CH UP button or CH

DOWN button

to select a setting.

5 Press MENU to confirm your

choice.

50

OSD Display

OSD

Z

Z

Z

This setting allows you to set whether information such as the
selected channel is shown on the TV screen when the DISPLAY
button is pressed.

ENTER

Miscellaneous

Display

OSD

On

1 Press the CH UP button or CH

CH

Off

DOWN button to select OSD
Display.

2 Press MENU to enter the OSD

Display menu.

3 Press the CH UP button or CH

DOWN button to select On or Off.

4 Press MENU to confirm your

choice.

51

Reset

OSD

Z

Z

Z

CH

The Reset function returns all of your TV’s user settings to their fac­tory defaults.

Warning:

The reset function will erase all of your custom and favorite channel
settings, and will reset all display settings (such as contrast,
brightness, etc.) to the factory default values. The reset function
cannot be reversed once it begins.

Miscellaneous

1 Press the CH UP button or CH

DOWN button to select Reset.

Yes

Reset

No

2 Press MENU to enter the Reset

menu.

3 Press the CH UP button or CH

ENTER

DOWN button to select Yes or No.
By default, No is already selected
(highlighted in red).

4 Press MENU to confirm your

choice.

52

12

T aking Care of Y our TV

Care and Maintenance of the TV

Turn the power off before you begin cleaning the
TV.

For best results, use a clean lens cloth to
remove dust and fingerprints from the screen.

Do not wipe the shell of the TV with alcohol,

GAS

OIL

methanol, gasoline or oil products to avoid
damaging the finish. Wipe the shell with a dry
soft cloth and use neutral cleaning fluids.

If your model has leather components, wipe the
leather parts with a dry cloth and keep the area
dry. Place the TV far from sources of steam to
avoid making the leather wet.

Be careful to remove the power plug correctly.
Hold the plug instead of pulling the power cord.

Arrange the power cord with other cords to avoid
knotting or bending which may cause fire due to
damage or electric leakage.

53

Care and Maintenance of the Animal Cover

• The plush cover may be patted down by hand to remove dust.
Do not dry clean or wash the plush cover by yourself.

• Do not unzip the plush cover. The plush cover may only be
removed by the manufacturer to service the product.

• To avoid deformation of the plush c over, do not pull on, twist,
or pull fibers off the plush cover.

• The view angle of the screen cannot be adjusted. Do not
attempt to force the screen to t ilt in any direction.

• Do not pull or apply undue force to the area outside of t he TV
module.

54

13

Troubleshooting

Situation Solution

• Connect the power cord properly.

• Press the POWER button on the control
panel or remote control.

• Press the SOURCE button to cycle through

No picture and sound.

No picture, or poor picture, sound is
OK.

Picture is not in color.

Picture is OK, no sound.

One of the speakers has no sound.

Can’t receive some TV channels using
cable TV.

Want to reset TV settings. • Use the Reset function in the OSD menu.

Cannot operate menus.

No image but have sound.

connected video sources.

• Press the CH UP button or CH DOWN button
to switch to other TV stations.

• Check the TV/CATV OSD settings. See
“TV/CATV” on page 42.

• Make sure all cables are connected properly.

• Check the antenna and cable connections.

• Adjust the brightness in the OSD menus. See
“Brightness” on page 30.

• Adjust the saturation in the OSD menus. See
“Saturation” on page 34.

• Press the VOL UP button on the control panel
or remote control.

• Make sure the MTS option is set to Main or
Dual. See “MTS” on page 43.

• Adjust the balance in the OSD menus. See
“Balance” on page 40.

• Try the Auto Program function in the OSD “TV
Setting” menu. See “Auto Program” on
page 44.

• If OSD items are colored light blue, the sys­tem is in a state such that those settings are
not available. For example, video setting is
available in TV mode.

• Make sure the video signal cable is con­nected properly.

55

Situation Solution

No sound but have image.

Screen image turns over.

Snow appears on the screen.

Blurred or overlapped images.

• Make sure the source device is functioning

properly.

• Set the volume to a higher level.

• Make sure the audio cable is connected
securely.

• Turn the mute off.

• Make sure the video signal cable is con­nected properly.

• Adjust the location of the antenna, placing it
far from roads or sources of interference.

• Check the antenna and the video signal line
connections.

• Readjust the sharpness setting.

• Choose programs with high quality signals.

• Adjust the direction of the antenna or change
the video signal cable.

56

14

Specifications

Standard Specifications for all Models

K206-10A1

LCD Panel Size 9.6-inch TFT
Aspect Ratio 4:3
Best Resolution 800 (horizontal) x 600 (vertical)
Maximum Display Area 194.4 mm (H) x 145.8 mm (W)
TV System NTSC

Video System

Audio System

Built-in Speakers 2W + 2W
Power Supply 100-240V, 50/60 Hz, 12V DC
Power Consumption 42W (Average)
Optional Accessories External Speakers
Power Consumption (Standby) 0.9W Maximum

S-Video Input and Composite Video Input (through the
4-IN-1 Cable)

Input: RCA Jack (L/R Audio Input through the 4-IN-1

cable)

Output: 3.5mm ø Headphone Jack x 1

57

Model-specific Specifications

Product
Number

K206-10A1-002 3 kg

K206-10A1-003 3 kg

Weight

(including base)

Dimensions

(including base)

435 x 492 x 224

520 x 321 x 224

K206-10A1-004 3 kg 544 x 300 x 224

K206-10A1-005 3 kg 508 x 380 x 224

K206-10A1-006 3 kg 488 x 300 x 224

58

495 x 332 x 142495 x 332 x 142

K206-10A1-007

K206-10A1-008

3 kg 495 x 332 x 224

3 kg 474 x 300 x 224

Product
Number

Weight

(including base)

Dimensions

(including base)

K206-10A1-009 3 kg 442 x 488 x 224

K206-10A1-010

K206-10A1-011

K206-10A1-012

3 kg 390 x 515 x 224

3 kg 460 x 334 x 224

3 kg 454 x 454 x 224

59

15

Glossary

Aspect Ratio The ratio of width to height of a film, image or display screen.
Broadcast TV Broadcasting video signals using high-frequency electromagnetic

waves to distribute television channels to viewers (standard TV broadcast).

CATV Community Antenna Television, the original name for cable TV. A television

distribution system that uses coaxial cable instead of the traditional radio broad­casting (over-the-air) method to deliver television, FM radio, and other services to
consumers.

Color Temperature Adjusting the color temperature enables you to set the inten-

sity of white light. Color temperature is measured in Kelvin (K). Higher color tem­peratures result in a blue tint. Lower temperatures result in a red tint.

DUAL Used with SAP and NTSC, enables broadcast of the main broadcast signal

on one speaker, and the alternate audio speaker on the other speaker.

Hue Colors in a color system are measured by hue, saturation and luminance.

Hue indicates the predominant color.

LCD Liquid Crystal Display. A display technology that uses rod-shape d molecules

(liquid crystals) that flow like liquid and bend light.

Main is the default audio signal belonging to a particular channel.
MTS Multi-channel Television Sound. Enables reception of audio other than the

primary (MAIN) audio signal. DUAL enables reception of a stereo audio signal,
while SAP (Second Audio Program) enables reception of a separate channel that
may be a different language or completely different information such as the news.

RCA connector An RCA or phono connector is a plug and socket for a two-wire

(signal and ground) coaxial cable that is widely used to connect audio and video
components. RCA sockets are commonly found at the rear of audiovisual equip­ment.

RCA jack An RCA jack enables you to attach the 4-IN-1 cable to a device socket.

Refer to “Checking Package Contents” on page 17 and “Connecting to a Game
Device” on page 23.

SAP (Secondary Audio Program) is an audio channel used with the NTSC TV

standard for auxiliary transmission of such items as foreign language broadcasting
or teletext.

Saturation Chromatic purity indicating the amount of white contained in a color.

Fully saturated colors are pure colors; less saturated colors appear as pastel
shades.

60

S-Video Super-video, a video cabling standard used to transmit video by keeping

brightness (Y) and color information (C) on separate channels. Most often used
with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pic­tures.

VCD A compact disk format developed in 1993 by Sony and Philips to capture full-

motion video. A standard Video CD can hold 74 minutes of near VHS-quality video
and CD-quality sound.

61