Page 1
Explanation of WARNING Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence dangerous voltage within the
inside of the product that may be sufficient level to constitute a risk of electric
shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and servicing instructions.
Safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this LCD TV near water.
6) Clean only with dry cloth. Do not use liquid, alcohol, or aerosol cleaners.
7) Do not block any ventilation openings. Install your LCD TV in a well ventilated
area.
8) Keep your LCD TV away from moisture, excessive dust and any heat sources,
such as radiators, heat registers, stoves, or any other apparatus (including
amplifiers) that produce heat.
9) Do not remove the back cover. There are no user-serviceable parts inside.
10) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
11) Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from the LCD TV.
12) Never rest objects on the power cord or place it in high traffic areas.
13) Only use attachments/accessories specified by the
manufacturer.
14) Use only with stand, tripod, bracket, or table specified by
the manufacturer, or sold with the LCD TV. When a cart is
used, use caution to avoid injury from tip-over.
15) Unplug this LCD TV during lightening storms or when
unused for long periods of time.
16) Refer all servicing to qualified service personnel-Servicing may be required if the LCD TV has been damaged in any way, such as
power-supply cord or plug damage, liquid has been spilled or objects have fallen
into the LCD TV, the LCD TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Page 2
17) Do not expose your LCD TV to dripping or splashing, and do not place objects
filled with liquids on it.
18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the
back panel of unit.
19) This product is only to perform the useful function of entertainment and visual
display tasks are excluded.
20) Wall or ceiling mounting: When mounting the product on a wall or ceiling, be sure
to install the product according to the method recommended by the manufacturer.
Use only the mounting hardware recommended by the manufacturer. This is a
safety feature.
CAUTION: Any damage caused by incorrectly attempting to mount this
LCD TV is not covered under the terms of the manufacturers warranty.
WARNING: To reduce the risk of fire or electric shock, do not expose this
LCD TV to rain or moisture.
WARNING: Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you
are qualified to do so.
Operation Instructions
Thank you for purchasing multi-scan color LCD-TV. Please read this guide thoroughly before
installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This
pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection
against harmful interference to a residential installation. This
radiate radio frequency energy. Harmful interference to radio communication may be led as a
result if it‘s not properly installed and used. However, there is no guarantee that interference will
not occur in a particular installation. If this
television reception, resetting the
correct interference by doing one or more of the following:
‧Reorient or relocate the receiving antenna.
‧Move the
‧Connect the
connected.
‧Consult your local dealer or an qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes
or modifications to this LCD-TV would void the user‘s authority to operate this device.
LCD-TV
has been tested and found compliant with the limits for a Class B digital device,
generates, uses, and can
LCD-TV
LCD-TV
LCD-TV
LCD-TV
LCD-TV
and the receiver further away from each other.
into an outlet on a circuit different from that to which the receiver is
may determine it. Moreover, users are encouraged to
does cause serious interference to radio or
Page 3
HDMI Licensing Statement
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Antenna Installation Instruction
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static
charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
2. Lightning
For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning and power-line surges.
Do not disconnect the antenna or the power cord during a heavy storm lighting may strike while
you are holding the cable cord, causing serious injury; turn off your LCD TV and wait for the
weather to improve.
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits, When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Page 4
Content
ACCESSORIES................................................................................................................. 1
FRONT PANEL BUTTONS ................................................................................................ 2
REAR HOUSING IOS........................................................................................................ 3
REMOTE CONTROL......................................................................................................... 4
INSTALLATION.................................................................................................................. 6
Connecting RF antenna and Cable TV ....................................................................... 6
Connecting to DVD / Set Top Box............................................................................... 6
Connecting to External Stereo System to Listen to LCD TV Sound............................ 8
Connecting to the Headphone .................................................................................... 8
Connecting to a Computer.......................................................................................... 8
PC Audio In................................................................................................................. 9
Connecting to A/V Device with SPDIF input ............................................................... 9
Powering the LCD TV ................................................................................................. 9
BASIC OPERATION ........................................................................................................ 10
Turning on the LCD TV............................................................................................. 10
Power On/Off............................................................................................................ 10
Select input source ................................................................................................... 10
Volume Adjusting ...................................................................................................... 10
INFO ......................................................................................................................... 10
DTV Guide.................................................................................................................11
Picture .......................................................................................................................11
Sound ........................................................................................................................11
Channel Select ..........................................................................................................11
Sleep Time Setting.....................................................................................................11
Zoom .........................................................................................................................11
Favorite Channel ...................................................................................................... 12
Wide ......................................................................................................................... 12
Freeze Picture .......................................................................................................... 12
C.C ........................................................................................................................... 12
Using the OSD function ............................................................................................ 12
ADVANCED OPERATION—OSD MENU ........................................................................ 13
Video Menu............................................................................................................... 13
Audio Menu .............................................................................................................. 13
Setup Menu .............................................................................................................. 14
TV Menu ................................................................................................................... 17
VGA Menu ................................................................................................................ 18
ADVANCED OPERATION—REMOTE CONTROL.......................................................... 18
PIP/POP ................................................................................................................... 18
TECHNICAL SPECIFICATION ........................................................................................ 20
SAFETY PRECAUTIONS ................................................................................................ 21
CARE AND MAINTENANCE ........................................................................................... 22
TROUBLESHOOTING..................................................................................................... 22
Page 5
ACCESSORIES
Thank you for purchasing this LCD-TV.
This LCD-TV package comes with:
LCD TV
User’s Manual
Quick Start Guide
Warranty Card
Product Registration Card
Remote control
Battery AAA x 2
Power Cord
VGA Cable
RCA A/V Cable
1
Page 6
FRONT PANEL BUTTONS
X Y Z [ \ ]
^
_`
Volume Down
Volume Up
On Screen Display Menu On/Off
CH Down
CH Up
Enter
Power ON/OFF button
Remote Control Receiver
❾ Power LED Indicator
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
(Only for DTV source in this model.)
Note:
1. Press
press
VOL+
2. Press
press
VOL-
2
VOL+
VOL-
and
and
and
and
MENU
MENU
VOL+
VOL+
buttons at the same time to lock power button, and
buttons again to unlock it.
buttons at the same time to lock OSD menu, and
buttons again to unlock it.
Page 7
REAR HOUSING IOS
A B C D E F G H I J K L M N O P
A Power (AC input)
B Air TV input (NTSC or ATSC)
C Cable TV input (CATV or Digital Cable)
D SPDIF Optical output
E HDMI-3 Input Terminal
F HDMI-2 Input Terminal
G HDMI-1 Input Terminal
H VGA signal input
I YPbPr signal input
J S-Video input
K Composite Video input
L YPbPr signal Audio input (left/right)
M AV/ S-Video signal Audio input (left/right)
N Audio output
O PC Audio input
P Headphone Jack
3
Page 8
REMOTE CONTROL
4
Page 9
Remote control button function as follows:
1 POWER Power ON/OFF
2 MTS Selects Mono, Stereo or SAP in TV mode. Select audio
language in DTV mode
3 INFO Displays current information
4 SLEEP Sets the TV Sleep Timer
5 SOUND Selects sound modes
6 0~9, 100/- number
button
7 VOL+ and VOL- Adjusts volume UP/DOWN
8 GUIDE Shows the electronic program guide (EPG)
9 FAV.A/D To skip or restore Favorite Channels
10 UP/DOWN/LEFT/RIGHT/
ENTER
11 INPUT Input source select
12 ZOOM Adjusts window size
13 FREEZE “Freeze-Frame” the current screen
14 P. POS Adjusts sub-screen window position
15 C.C Displays captions during programing that offer Closed Captioning
16 P. S I Z E Adjusts sub-screen window size
17 MUTE
18 AIR/CABLE
19 PICTURE
20 RETURN Return to previous channel
Access channels directly
UP/DOWN/LEFT/RIGHT: Navigate and adjust OSD functions
ENTER: Enter the selected function setting
service
Volume mute ON/OFF
Swaps between Air/Cable modes.
Selects picture modes
21 CH▲ and CH▼ Adjusts Channel UP/DOWN
22 FAV. CH Selects from preset Favorite Channels
23 MENU On Screen Display (OSD) menu ON/OFF
24 WIDE Change the image scaling
25 PIP/POP Toggle to enable/disable Picture in Picture/Picture Out of
Picture function
26 P.INPUT POP/PIP input source select
27 V-CHIP Sets V-Chip rating
28 SWAP Switches between main screen and sub-screen
Note: PIP means Picture In Picture. POP means Picture Out Of Picture.
5
Page 10
INSTALLATION
r
r
Connecting RF antenna and Cable TV
Make sure the power is OFF before installing your LCD TV.
1) Air TV: Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the
air TV channels into memory with AUTO SCAN function when using an antenna TV system. This
air input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV
system (ATSC) can be found by the scanning of “AIR” in the AUTO SCAN function. (See page 16.)
RF Cable or Adapte
(not supplied)
2) Cable TV: Connect the LCD TV to the cable with CATV and Digital cable. Preset the cable TV
channels into memory with AUTO SCAN function when using a Cable TV system. The cable input
jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV) and
Digital cable system (clear QAM) can be found by the scanning of “Cable” in the AUTO SCAN
function. (See page 16.)
CATV or Digital Cable
(not supplied)
Connecting to DVD / Set Top Box
Connect Video/Audio cables from compatible devices into the back panel of LCD TV.
1) With AV cable:
RCA A/V Cable
VCR or DVD Playe
6
Page 11
2) With S-Video cable:
r
A
r
A
r
A
S-Video Cable (not supplied)
udio in Cable
(not supplied)
3) With YPbPr cable:
4) With HDMI cable:
VCR or DVD Playe
VCR or DVD Playe
udio in Cable
(not supplied)
(DVD Player should have
the HDMI output terminal)
VCR or DVD Player
HDMI Cable (not supplied)
5) With HDMI-DVI cable:
udio in Cable (not supplied)
(DVD Player should have
the DVI output terminal)
VCR or DVD Playe
HDMI-DVI Cable (not supplied)
7
Page 12
Connecting to External Stereo System to Listen to LCD TV Sound
Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system
(stereo system sold separately).
Audio in Cable
(not supplied)
Stereo system
Connecting to the Headphone
Connect the headphone to the headphone output terminal of the LCD TV.
(Headphone sold separately).
Headphone
(not supplied)
Connecting to a Computer
Connect the VGA cable from VGA output of Computer to the VGA terminal input of your LCD
TV.
PC
VGA 15 Pin Cable
8
Page 13
PC Audio In
A
Connect the Audio cable (green) from audio output of your Computer to the audio input
terminal (green) of your LCD TV.
PC
PC Audio Connection (not supplied)
Connecting to A/V Device with SPDIF input
Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV.
Audio Cable
(not supplied)
A/V Device
Stereo System SPDIF Optical Cable (not supplied)
Powering the LCD TV
Connect the power cord to the AC inlet on the back of your LCD TV, after all connections
have been completed, and plug the other end of the power cord into a correctly grounded
electrical outlet.
C wall Switch
Note: For more information on external devices, please refer to the manufacturer’s user manual.
9
Page 14
BASIC OPERATION
To operate your LCD TV, you may use the TV remote control or top panel buttons to select
input source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Confirm that all external equipment is connected properly.
2. Insert the power plug and the power LED indicator will light red.
Power On/Off
To turn the LCD TV on/off :
Press POWER button under the LCD TV, or press the POWER button on your remote
control to turn on/off the TV. The power LED indicator lights green when the LCD TV is on.
Select input source
To select the desired input source:
Press the INPUT button on the remote control, Use ◄► to select the required input source
between TV, AV, S-Video, YPbPr, HDMI1, HDMI2, HDMI3, and VGA.
To confirm the selection, press ENTER.
Volume Adjusting
Press VOL +/- to adjust volume.
To silence volume, press MUTE.
If you want to restore volume, press MUTE again, or press VOL +/- directly.
INFO
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or some of the
information about Input, Channel, Resolution, Audio Type, Smart Sound Modes, and Smart
Picture Modes, depending on what input source it is in.)
10
Page 15
DTV Guide
To see the electronic program guide of the channel, press the GUIDE button on your remote
control. It will display the background information related to the channel program.
Picture
Press the PICTURE button on the remote control to switch between the Smart Picture
modes of User, Cinema, Sport, Vivid, and Hi-Bright.
Sound
Press the SOUND button on the remote control to switch between the Smart Sound modes
of User, Rock, POP, Live, Dance, Techno, Classic, and Soft.
Channel Select
Press number key or CH ▲/▼ button to select your desired channel.
1. In TV mode
The 100/- button functions as “100”. If your desired channel is below 100, directly press
number buttons. If your desired channel is over 100, press 100/- button first, and then
press the other two number buttons.
Ex: Your desired number is 8.
Press 0 → press 8, or press 8 only.
Ex: Your desired number is 110.
Press 100/- → press 1 → press 0.
※ Return to the previous channel, press RETURN button.
2. In DTV mode
The 100/- button functions as “ - “. Use 100/- button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press 100/- → press 3.
※ How to switch between Air TV and Cable TV?
When in TV mode, go to the “Tuner Mode” in the TV menu , and switch between Air and
Cable.
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to automatically
shut off the LCD TV after a preset period of time passed. There are several times for
choice – OFF, 30min, 60min, 90min, or 120min.
Zoom
Press ZOOM button repeatedly to select the screen size. You can select from 1/8, 1/4, 1/2, 1,
x2, x4, and x8.
11
Page 16
Favorite Channel
You can press FAV.CH button to watch your favorite channels. Use FAV.A/D button to add
the current channel to your favorite channels, or to delete it from your favorite channels. You
can add up to 10 favorite channels.
Wide
Repeatedly press WIDE button to select the aspect ratio of screen. You can select between
No scale, Normal, Full, Wide 1, Wide 2, Wide 3, 4:3, and 16:9.
Freeze Picture
Press FREEZE button to freeze picture. However, the sound still continues.
C.C
Repeatedly press C.C button to select closed caption signal formats and set up caption
modes for TV/ DTV channels.
Using the OSD function
You can use the OSD menus and options to adjust various settings by using the remote
control.
The basic operation is as following:
• Press MENU to display OSD menu.
• Press ◄► to select your desired top Menu.
• Use ▲▼ to select the control you want to adjust.
• When selecting the control with Press <Enter>, press ENTER to enable the function.
• Press ◄► to adjust or select the settings.
• Press MENU to exit from the OSD menu.
12
Page 17
ADVANCED OPERATION—OSD MENU
Video Menu
— Adjusting the picture quality
Video Menu is active in all but the VGA input source.
• Contrast: To adjust contrast of video. (right: Max, left: Min.)
• Brightness: To adjust luminance of video. (right: Max, left: Min.)
• Color: To adjust color. (right: brilliant color, left: pale color.)
• Tint: To adjust tint level. (right: greenish tone, left: reddish tone.)
• Sharpness: To adjust picture sharpness. (right: sharper, left: softer.)
Note: Note: To adjust the above controls in the Video settings, Smart Picture Mode must be set
to “User”.
• Smart Picture Mode: To select picture mode between User, Cinema, Sport, Vivid, and Hi-Bright.
Audio Menu
—To set the audio quality and status
Audio Menu is active in all but the VGA input source.
• Bass: To adjust bass.
• Treble: To adjust the treble
• Balance: To adjust left and right audio balance.
• Surround: To enjoy a concert hall effect, select On when stereo is playing.
• Audio out: To control sound output ON/OFF from the RCA audio out connectors.
• Digital Audio Out: To select the sound format of the digital TV.
• Digital Audio Language: To select the audio language of the digital TV.
Note: To adjust the above controls in the Audio settings, Smart Sound Mode must be set to
“User”.
• Smart Sound Mode: To select sound mode between User, Rock, POP, Live, Dance, Techno,
Classic, and Soft.
13
Page 18
Setup Menu
—To set up OSD window
Setup Menu is active in all input sources.
• Language: To select a OSD language from English, French or Spanish.
• Parental: To set up parental control.
When you enter this control, the screen below will be displayed.
The factory default of the password is “0000”.
To enable parental control, input the password, press ▼ button to focus on OK key, and press
ENTER. (select Cancel if you want to exit)
After entering, the following screen will be shown.
‧ Channel Lock: To lock channels. Use ◄► to select the channel you want to lock, and then
press ENTER to lock or unlock it.
‧ Change Password: To change the password, press ENTER and enter the password again.
Press ENTER, and the following screen appears.
14
Page 19
Enter the new password, use ▼ to move the cursor down, and then enter the new password
again, press OK to confirm or Cancel to exit.
Note: Please make sure you remember your new password after changing, because you
cannot recall the default setting of the password by any selection.
‧ Clear All: To clear all the locks set before, press ENTER.
Press MENU to return to the previous page.
• V-Chip: Press ENTER, and the following screen appears. V-Chip is transmitted from TV station
to help parents monitor what their children watch. According to the pre-set of factory, viewers can
see all of the channels. However, setting V-Chip can block the appointed channels.
The factory default of the password is “0000”.
To enable parental control, input the password, press ▼ button to focus on OK key, and then
press ENTER. (Select Cancel if you want to exit.)
After entering, the following screen will be shown.
Use ▲▼ to select your desired optional item, and press ENTER.
‧ Block MPAA Rating: To adjust movie blocking level in the US. You can select between
NONE, G, PG, PG-13, R, NC-17, or X.
The movie Ratings in the US are defined as following.
G General audience R Restricted
PG Parental guidance suggested NC-17 No one 17 and under limited
PG-13 Parents strongly cautioned X Adult audience only
Use ENTER button to block or unblock the ratings, and use MENU to exit.
‧ Block TV Rating: To adjust TV blocking level in the US. You can select between TV-Y, TV-Y7,
TV-G, TV-PG, TV-14, or TV-MA.
15
Page 20
The TV Ratings in the US are defined as following.
TV-Y All children TV-PG Parental guidance suggested
Parents strongly cautioned: this
program contains some material
that is unsuitable for children under
14 years of age
TV-Y7
Directed to older children: this
program is designed for children
age 7 and above
TV-14
TV-G General audience TV-MA Mature audience only
Use ENTER button to block or unblock the ratings, and use MENU to exit.
‧ Canadian English Rating: To adjust blocking level in English-speaking region of Canada.
You can select between CE_E, CE_C, CE_C8, CE_G, CE_PG, CE_14, and CE_18.
The TV Ratings in English-speaking region of Canada are defined as following.
CE_E Exempt CE_PG Parental guidance
CE_C Children CE_14 Viewers 14 years and older
CE_C8 Children eight years and older CE_18 Adult programming
CE_G
General programming, suitable for
all audiences
Use ENTER button to block or unblock the ratings, and use MENU to exit.
‧ Canadian French Rating: To adjust blocking level in French-speaking region of Canada.
You can select between CF_E, CF_G, CF_8ANS, CF_13ANS, CF_16ANS, and CF_18ANS.
16
Page 21
The TV Ratings in French-speaking region of Canada are defined as following.
CF_E Exempt CF_13ANS
CF_G General CF_16ANS
CF_8ANS
Use ENTER button to block or unblock the ratings, and use MENU to exit.
‧ Block MPAA Unrated: To block unrated movies.
‧ Block TV None Rating: To block unrated TV programs.
General-Disadvised to the
young children
CF_18ANS
This emission can not be appropriate
to the children of less than 13 years
This emission is not appropriate for
less than 16 years
This emission is reserved to the
adults
• Color Temperature: To select the color temperature from Warm, Cold, Normal or User. (If you
select User, you can adjust the degree of R, G, B in Color Temp. to suit your personal preference.)
• Time Zone: To select Time Zones.
• OSD Timeout: To setup the display time of OSD. (5, 15, 45, and 60 seconds)
• Memory Recall: To restore the factory default settings.
TV Menu
—To set up for TV
It is only active in TV source.
• Tuner Mode: To select Cable or Air as the TV source. Select “Cable” if you want to watch Cable
TV channels, and select “Air” to watch Air TV channels.
• Auto Scan: To auto scan the TV and DTV channels. Press ENTER to start auto scanning TV and
DTV channels. Press ENTER again at any time to interrupt scanning.
• Channel Add/Del.: Select Delete to skip the channel appointed, or select Add to restore the
channel appointed.
• Channel Name: Press ENTER to edit a name for the channel appointed. Use ▲▼◄► to select
the letters you want, and use Backspace key to delete backwards. Move the cursor to OK and
then press ENTER to complete and save the channel name. To cancel editing, choose Cancel or
exit without pressing OK.
• Digital Closed Caption: To select closed caption signal formats and set up caption modes for
digital TV channels. (C1~C4, Service1~Service 6, or OFF)
• Digital CC Style: Press ◄► to select Caption Style from As Broadcaster or Custom. When
Custom is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed settings.
17
Page 22
‧ Font Size: To select a font size from Large, Small, or Medium.
‧ Font Style: To select different font style from Style 1 to Style 7.
‧ Font Color: To select a font color from Black, White, Green, Blue, Red, Cyan, Yellow, or
Magenta.
‧ Font Opacity: To select font opacity from Solid, Translucent, or Transparent.
‧ Background Color: To select background color.
‧ Background Opacity: To select background opacity.
‧ Window Opacity: To select window opacity.
‧ Window Color: To select window color.
VGA Menu
—To set up for computer
It is only active in VGA source.
Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position, fine tune
•
and H-Size.
• Contrast: To adjust contrast of the video.
• Brightness: To adjust luminance of the video.
• Fine Tune: To adjust the delay time of data and clock to reduce noise in picture.
• Manual Clock: To adjust the horizontal pixel clock of the video.
• H. Position: To adjust the horizontal position of the picture.
• V. Position: To adjust the vertical position of the picture.
ADVANCED OPERATION—REMOTE CONTROL
PIP/POP
PIP/POP button allows you to watch two screens from different sources at the same time.
Press PIP/POP on the remote control repeatedly.
The screen will change from normal screen → PIP screen → POP screen.
18
Page 23
PIP Screen POP Screen
• PIP Input Source Select
1. Press P.INPUT button to select input source for sub-screen as following.
Main Screen Available Sub-Screen Input Source
TV YPbPr / HDMI1 / HDMI2 / HDMI3 / VGA
AV YPbPr / HDMI1 / HDMI2 / HDMI3 / VGA
S-Video YPbPr / HDMI1 / HDMI2 / HDMI3 / VGA
YPbPr TV / AV / S-Video / HDMI1 / HDMI2 / HDMI3
HDMI1 / HDMI2 / HDMI3 AV / S-Video / YPbPr / VGA
VGA TV / AV / HDMI1 / HDMI2 / HDMI3
2. Use ◄► to select the sub-input source and press ENTER to confirm.
Note: To select the input source for main screen, press INPUT button
• SWAP: Press SWAP to exchange main screen to sub-screen, including video and sound.
The function is available both in PIP and POP.
• PIP Size Select: Press P. S IZ E to select the size of sub-screen. The function only acts on
PIP.
• PIP Position Select: Press P. P OS to select the position of sub-screen. The function only
acts on PIP.
Note that the screen indexed with the pink frame is the screen you select to set up. Use ◄►
to move the index between the main screen and the sub-screen.
19
Page 24
TECHNICAL SPECIFICATION
Type 37.02” TFT Active Matrix LCD
Glass surface Anti-Glare
Input signal
Audio 1 mini-stereo, 2 pair of RCA (L/R) stereo
Compatibility PC Up to 1366 x 768 Non-interlaced
Resolution Recommended
Speaker Output 10W x 2 @THD=10%
Audio Output
Power Voltage 100-240 VAC, 50/60 Hz (auto switch)
Operating
conditions
RGB RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync,
fh: 30-80 kHz, fv:50-75 Hz
RF TV system Antenna / NTSC+ATSC
Video 1 composite RCA, 1 S-Video, 1 YPbPr component,
3 HDMI
1366 x 768 @ 60 Hz
and supported
Temperature 32°F to + 104°F ( 0°C to + 40°C)
Humidity 10% to 65% (no condensation)
1280 x 1024 @ 60 Hz
1280 x 720 @ 60 Hz
1024 x 768 @ 60, 75 Hz
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
1 composite RCA (L/R), 1 SPDIF (optical),
1 Headphone jack, 1 stereo jack
Altitude To 10,000 feet (3,000m)
Storage condition
Dimensions Physical 941.6mm (W) x 724.3mm (H) x 294.5mm (D)
Weight Net 25.4 kg (48.0 lb)
Regulations UL, FCC-B (Doc-B)
Preset Timing Mode (Pre-adjusted to GTF® 1366 x 768 @ 60 Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates;
doing so may result in permanent damage to the LCD TV
Temperature -4°F to + 140°F (-20°C to + 60°C)
Humidity 10% to 90% (no condensation)
Altitude To 40,000 feet (12,000m)
37.1’’ (W) x 28.5’’ (H) x 11.6’’ (D)
On < 200 W (green LED) Power consumption
Stand by < 3 W (red LED)
Note: Product Specifications are subject to change without notice.
20
Page 25
SAFETY PRECAUTIONS
This LCD TV is manufactured and tested to insure the user’s safety. Improper use or
installation may result danger to the LCD TV as well as to the user. Carefully go over the
following WARNINGS before installation and keep this guide handy.
WARNINGS
This LCD TV should be operated only at the correct power sources indicated on the label on the
rear end of the LCD TV. If you’re unsure of the power supply in your residence, consult your local
dealer or power company.
Do not try to repair the LCD TV yourself as it contains no user-serviceable parts. The LCD TV
should only be repaired by a qualified technician.
Do not remove the LCD TV cabinet. There is high-voltage parts inside that may cause electric
shock. even when the power cord is disconnected .
Stop using the LCD TV if the cabinet is damaged. Have it checked by a service technician.
Put your LCD TV only in a clean, dry environment. Unplug the LCD TV immediately if gets wet
and consult your service technician.
Always unplug the LCD TV before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the glass screen.
Keep the LCD TV away from magnetic objects, motors, TV sets, and transformer.
Do not place heavy objects on the cable or power cord.
For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed near the equipment and
shall be easily accessible.
21
Page 26
CARE AND MAINTENANCE
Care
Avoid exposing your LCD TV directly to sunlight or other heat source.
Place your LCD TV away from the sun to reduce glare.
Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD TV.
Make certain your LCD TV is installed in a clean and moisture-free area.
Keep your LCD TV away from magnets, motors, transformers, speakers, and TV sets.
Safety Tips
If smoke, abnormal noise or odor came out of your LCD TV, caution should be remove the
power cord immediately and call your service center.
CAUTION-Never remove the rear cover of your LCD TV cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
Never try to repair your LCD TV yourself. Always call your service center or a qualified
technician to fix it.
TROUBLESHOOTING
No power
Make sure A/C power cord is securely connected.
Plug another electrical device into the power outlet to verify that the outlet is supplying proper
voltage.
Power on but no screen image
Make sure the video cable supplied with the TV is tightly secured to the video output port on
back of video source (DVD, VCR…). If not, tightly secure it.
Adjust brightness.
Make sure all signal cables are installed.
Wrong or abnormal colors
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
Connect the TV unit to another video source or use another TVs to make sure the video source
was not causing the problem.
22
Loading...