Quick Start Guide
JT02 37" Liquid Crystal Display TV
This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.
Front ViewFront View
Rear ViewRear View
1 65432
7 98
1. Volume down button
2. Volume up button
3. OSD Menu button
4. Channel down button
5. Channel up button
6. Enter button
7. Power button
8. Infrared receiver
9. Power LED indicator
Making Connections
Connecting to Antenna/Cable TV
1. Connect one end of the UHF/VHF (Antenna)
or CATV cable to the TV IN jack (UHF/VHF
IN jack) on the back of the TV.
2. Connect the other end of the UHF/VHF
(Antenna) or the CATV cable to the Antenna
or CATV socket.
Connecting to VCR, VCD or DVD Player
The illustrations below show you how to connect your TV to a VCR, VCD or a DVD player.
1 2 3 4 5 6 7 8 9 10 11121314
1. AC Power Switch
2. AC power input
3. HDMI-1 Input Terminal (19 pin)
4. HDMI-2 Input Terminal (19 pin)
5. VGA (15 pin) Signal Input from
Computer
6. YPbPr/ HD Component Video Input
7. S-Video Input
8. Composite Video input
9. SCART 1 Input
10. SCART2 / SCART2-SV Input
11. RF Antenna / Cable TV Input
12. Audio Input for VGA
13. Audio Input for AV, S-Video or YPbPr/
HDMI-DVI components (L/R)
14. Audio Output for AV, S-Video or YPbPr
components (L/R)
Getting Started
Selecting Input Source
1. Make sure your TV is turned on and a device
such as a DVD player is connected.
2. Press the SOURCE button on the remote
control and use the
the required input source between PC, HDMI1,
HDMI2, TV, YPbPr, AV, SVIDEO, SCART1,
SCART2, and SCART2-SV.
3. Press enter to confirm your selection.
/ button to select
TV
HDMI2
HDMI1
PC
YPbPr
SCART2-SV
AV
SVIDEO
SCART1
SCART2
With RCA AV cable With S-Video cable
With YPbPr cable With SCART1
Connecting the Power Cord
1. Plug the power connector into the
AC-IN input jack on the rear cover of
the TV-set.
2. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
3. Turn the main power switch on to
supply power to the TV.
Auto Channel Scan
Follow the instructions below to automatically preset the channels for your TV
before watching it for the first time.
1. Press the "MENU" button on your remote control or the control panel.
2. Use the / button to select Channel Menu.
3. Press the / button to select country.
4. Press the "ENTER" button to start Auto Scan.
Note: After performing Auto Scan, you need not do it again when turning
on your TV next time.
Auto Scan
C h a n n e l
A u t o S c a n U K
M a n u a l S t o r e
N a m e
OSD
S e l e c t
MENU
E x i t
© Copyright 2007 Hannspree, Inc. All rights reserved.
JT2002310681P
Loading...