HANNspree JT01-32E2 User Manual

Quick Start Guide

JT01-32E2 32" Liquid Crystal Display TV

This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.

Front ViewFront View

Rear ViewRear View

1

2

1

65432

3

4

987

1. Volume down button

2. Volume up button

3. OSD Menu button

4. Channel down button

5. Channel up button

6. Enter button

7. Power button

8. Infrared receiver

9. Power LED indicator

Making Connections

Connecting to Antenna/Cable TV

1. Connect one end of the UHF/VHF (Antenna)
or CATV cable to the TV IN jack (UHF/VHF
IN jack) on the back of the TV.

2. Connect the other end of the UHF/VHF
(Antenna) or the CATV cable to the Antenna
or CATV socket.

Connecting to VCR, VCD or DVD Player

The illustrations below show you how to connect your TV to a VCR, VCD or a DVD player.

1. Audio Output for AV, S-Video or YPbPr
components (L/R)

2. Audio Input for AV, S-Video or YPbPr/
HDMI-DVI components (L/R)

3. Audio Input for VGA

4. RF Antenna / Cable TV Input

5. SCART2 / SCART2-SV Input

6. SCART1 Input

7. Composite Video input

Getting Started

Selecting Input Source

1. Make sure your TV is turned on and a device

such as a DVD player is connected.

2. Press the SOURCE button on the remote

control and use the

the required input source between PC, HDMI1,

HDMI2, TV, YPbPr, AV, SVIDEO, SCART1,

SCART2, and SCART2-SV.

3. Press ENTER to confirm your selection.

 /  button to select

8910111214 13

8. S-Video Input

9. YPbPr/ HD Component Video Input

10. VGA (15 pin) Signal Input from Computer

11. HDMI2 Input Terminal (19 pin)

12. HDMI1 Input Terminal (19 pin)

13. AC Power Input

14. AC Power Switch

TV

HDMI2

HDMI1

PC

6

7

5

YPbPr

SCART2-SV

AV

SVIDEO

SCART1

SCART2

With RCA AV cable With S-Video cable

With YPbPr cable With SCART1

Connecting the Power Cord

1. Plug the power connector into the AC-IN

input jack on the rear cover of the TV-set.

2. Insert the three-pronged plug at the other

end of the power cord into a power outlet.

Auto Channel Scan

Follow the instructions below to automatically preset the channels for your TV
before watching it for the first time.

1. Press the "MENU" button on your remote control or the control panel.

2. Use the  /  button to select Channel Menu.

3. Press the  /  button to select country.

4. Press the "ENTER" button to start Auto Scan.

Note: After performing Auto Scan, you need not do it again when turning
on your TV next time.

Auto Scan

C h a n n e l

A u t o S c a n U K

M a n u a l S t o r e

N a m e

3. Turn the main power switch on to supply

power to the TV.

© Copyright 2007 Hannspree, Inc. All rights reserved.

OSD

S e l e c t

MENU

E x i t

JT2002310661P