ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
42‟‟ LCD TV Hannspree AT06
2
Important Safety Notice
Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service
procedures recommended by AOC and described in this service manual are effective methods of performing service
operations. Some of these service operations require the use of tools specially designed for the purpose. The
special tools should be used when and as recommended.
It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in
order to minimize the risk of personal injury to service personnel. The possibility exists that improper service
methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE
NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in
which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not
undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not
recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the
equipment will be jeopardized by the service method selected.
Hereafter throughout this manual, AOC Company will be referred to as AOC.
WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics might create
shock, fire, or other hazards.
Under no circumstances should the original design be modified or altered without written permission from AOC.
AOC assumes no liability, express or implied, arising out of any unauthorized modification of design.
Servicer assumes all liability.
FOR PRODUCTS CONTAINING LASER:
DANGER-Invisible laser radiations when open AVOID DIRECT EXPOSURE TO BEAM.
CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION -The use of optical instruments with this product will increase eye hazard.
TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF
THIS SERVICE MANUAL.
Take care during handling the LCD module with backlight unit
-Must mount the module using mounting holes arranged in four corners.
-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen.
-Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to
the panel.
-Protect the module from the ESD as it may damage the electronic circuit (C-MOS).
-Make certain that treatment person‟s body is grounded through wristband.
-Do not leave the module in high temperature and in areas of high humidity for a long time.
-Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may
damage the panel.)
42‟‟ LCD TV Hannspree AT06
3
Version
Release Date
Revision Instructions
TPV Model
A00
Sep.-26-2007
Initial Release
E427ATNBBWHSNN
Revision List
42‟‟ LCD TV Hannspree AT06
4
Feature
42” Wide screen
Built-in Full channel Tuner(42” DTV Tuner )
For Digital TV , it could support DVB-T
with DVB-T, Nicam, Teletext.
Graphic (D-SUB)
HDMI
Items
Specification
LCD Panel
Screen Size
42”
TFT-LCD Panel
Aspect Ratio
16:9
Resolution
1366×768 (WXGA)
TV Function
TV Tuning
System
Analog
PAL B/G,D/K,I and SECAM D/K, L/L‟ (Multi-Europe)
Full Channel with Electronic PLL Tuner
Digital(For
DTV only )
COFDM Band Width: 7/8 MHz Format: MP @ ML
Aspect ratio: 4:3, 16:9 Picture Resolution: 720×576i
Remote controller, Batteries (x2), AC Power cord, Operation manual
1. General Specification
42‟‟ LCD TV Hannspree AT06
5
POWER:
Press to turn on/off the TV. The
TV is never completely
powered off unless it is
physically unplugged.
VIDEO
Press this key you could select
AV1, S-VIDEO, HDTV and
HDMI.
SCART
Press this key you could select
SCART 1,SCART2,and
SCART2-S.
0~9 DIGIT BUTTONS
To select a TV channel.
SUBPAGE
Teletext Sub-page function.
Source
Select your input source from
list, according to where you
connected your external
source.
SOUND
To select Mono/ Stereo/Dual
from TV RF input.
DTV MENU
Press this key to display DTV
menu.(for DTV only)
Zoom +,-.
Press these key to select
desired picture format.
(4:3, CINERAMA,16:9……)
VOL
Press + or – to increase or
decrease the volume.
MENU
Press this key to display main
menu.
DISPLAY
Press this key to display:
(1) the channel number when
watching a TV program.
(2) the input source when
watching an AV program.
MUTE
Temporarily interrupt the sound
or restore it.
PC
Display PC mode
TV
Display TV or DTV mode
(DTV mode for the TV which
have DTV TV function only)
PRE-CH
To display the previously
selected TV channel.
EPG
Press this key to display
electronic program guide
screen in DTV mode.(for DTV
only)
SLEEP
With this key you can set a
time period after which the TV
should switch itself to standby.
Press the key repeatedly to
select the number of minutes.
The counter runs from 15, 30,
45, 60, 90, 120 minutes. The
timer begins to count down
from the number of minutes
selected after the display has
disappeared.
CH
Press + or - (or MENU /
button) buttons to scroll
through the channels.
EXIT
Press this key to exit main
menu.
< > button
Use this button to
confirm selection or
adjust the desired
parameter.
button
When in menu mode,
use this button to select
to the up/down.
OK
Press this KEY to
validate your selected.
2. Operating Instructions
2.1. The Use of Remote Control
Use of the remote control
42‟‟ LCD TV Hannspree AT06
6
TELETEXT
Press TELETEXT. The Teletext screen appears.
MIX
Press MIX to superimpose the teletext over a normal
broadcast picture. Press again to return to Teletext
mode.
SIZE
Press SIZE repeatedly to display the upper teletext part, the
lower teletext part and then to return to the normal.
RED / GREEN / YELLOW / BLUE
Use the COLOURED BUTTONS to operate the
Teletext screen.
INDEX
Press INDEX to return to the main index page.
SUBTITLE
Press to select the next page marked as a subtitle
page and request it as the display page.
HOLD
Press HOLD to hold the Teletext page when viewing
information. Press again to return to automatic page
update.
REVEAL
Press REVEAL to display reveal hidden words e.g. quiz
page answers. Press again to hide.
PAGE SELECTION
Page can be selected in two ways.
a. Press ▼or ▲ to increase or decrease the page number by one.
b. By entering the page number, using digit buttons 0~9.
i INFO
Press i-INFO to show DTV information.
SUBPAGE ACCESS
When Teletext information exceeds more than one page, press
SUBPAGE first then select the required page number using digit
buttons 0~9.
Teletext
Teletext is an information service organized like a magazine, which is provided by
some TV stations in addition to regular television broadcasting.
42‟‟ LCD TV Hannspree AT06
7
2.2 To Use the Menus
1. Press the MENU button to display or close main menu.
2. Use the cursor up/down to select a menu item.
3. Use the cursor left/right to enter a submenu or enable/disable the
function.
4. Press the MENU button to exit the menu.
Main Menu
Press the MENU button to enter the main OSD (On Screen Display). Adjust the items including Picture Setup,
Sound setup, Options Setup, Installation Setup(TV setup) and PC Setup(only in pc mode).
Picture Setup:
Preset: choose between Standard, Mild, Personal, Vivid.
Personal gives access to following adjustments.
Contrast, Brightness, Color, and Sharpness: adjust these settings as required using the < / > buttons.
Tint: This option is only available for NTSC audio-visual sources.
Reset : Return to default settings. Press OK or < / > buttons to return to default settings.
Press the MENU button to exit the Picture menu.
Note: this menu is removed automatically after a few seconds without using the remote control.
When you adjust a menu option (Contrast for example), the menu is replaced by a sub-menu as illustrated.Press the
OK button to return to the Picture menu.
Sound Setup :
Balance: adjust the balance between left / right channels as required using the < / > button.
Bass: adjust the bass level as required using the < / >button.
Treble: adjust the treble level as required using the < / > button.
SRS WOW : Using < / >, activate(On) or deactivate(Off) SRS function.
SRS is an audio technology which improves the sound quality.
42‟‟ LCD TV Hannspree AT06
8
Reset: Return to default settings. Press OK or < / > buttons to return to default settings.
Press the MENU button to exit the Sound menu.
Note: this menu is removed automatically after a few seconds without using the remote control.
SRS WOW, SRS and (0) are registered trademarks of SRS Labs, Inc.
This product is designed using SRS technology with permission from SRS Labs, Inc.
Options Setup:
This menu allows to select the language for the menus as well as the colour of the screen when there is no video
input. It allows also to set an automatic shut-off time.
Menu Language : To select the language for the menus.
Menu Timeout : To set an automatic shut-off time for Menu. Using < / >buttons select 5>10>20>30>40>50 seconds.
Menu Background : Select Opaque or Transparent type.
Sleep Timer : To set an automatic shut-off time. Using < / > buttons select Off >15>30>45>60>90>120 minutes.
Once the time is ended, TV set automatic switch on standby mode.
If you turn the TV on standby mode after setting the sleep timer, setting will be erased. Set it again.
Bule screen : To have a blue screen when there is no video input or when the RF signal is very bad.
Using < / > buttons select On.
Select Off if you do not want the blue screen.
Teletext Language : Using < / > buttons, select the character set that will be used for Teletext on this channel.
The character set determines how characters are displayed on Teletext screen.
Reset : Return to default settings. Press the OK or < / > buttons to return to default settings.
Press the MENU button to exit the Options menu.
Note: this menu is removed automatically after a few seconds without using the remote control.
42‟‟ LCD TV Hannspree AT06
11
PC Setup :
In PC Setup, main menu is different from the one in TV Installation Setup(TV setup). Please select PC as main input.
H Position: use the < / > buttons to move the picture horizontally on the screen.
V Position: use the < / > buttons to move the picture vertically on the screen.
Phase: use the < / > buttons to move the picture phase on the screen.
Auto Sync: this function is used to automatically adjust the VGA input. Press the < / > buttons to start the adjustment
process.
Color temp. : to select the color temperature at your convenience.
Reset: Return to default settings. Press the OK or < / > buttons to return to default settings.
Installation Setup :
Installation Setup involves selecting all the settings required to be able to search for and store all the channels you
can receive.
Make sure that the television is switched on and follow all the steps in turn specified on this page.
Auto. Installation : Select Auto. Installation. Press OK button to display the
Auto. Installation.
Country : Select the relevant country using the < / > buttons.
This is the country you are in, or the country whose channels you want to
receive if you live near its borders. If you do not find your country , select Auto.
42‟‟ LCD TV Hannspree AT06
12
Start : Press the OK button to start channels searching.
Select Man. Installation using the \/ button.
Press the OK button to display the Manual. Installation menu.
Use the ^ / \/ buttons to select each option.
Prog. Number : Allow to select the program on which you want save a new
channel or a program you want to modify.
Using the < / > buttons, select the program.
Frequency : Allows to enter a specific frequency for tuning.
Using the \/ botton, select the Frequency option and press the OK button. Using the 0-9 digit and the < / > buttons,
enter desire frequency and press the OK button.
Name : Allows to edit the channel name.
Using the \/ button, select the Name option.
Using the > botton select the first letter field.
By pressing the 0-9 digit repeatedly and using the following table select the first character.
Repeat the procedure for each letter field.
Press the OK button to confirm.
Store prog. : Allows to Save a channel on a new Program No., to Insert a
channel on an already existing Program No.(the channel previously saved
on this program no. will be shifted to the upper program no.) or to Delete the
Program No.
Once a channel has been found and named, use the \/ botton to select the Store prog. option.
Using the < / > buttons, select Save, Insert or Delete and press the OK button
to confirm.
Swap prog : Allows to swap 2 programme numbers.
Using the ^ / \/ buttons select the Prog. number option.
Using the < / > buttons, select the program to be moved.
42‟‟ LCD TV Hannspree AT06
13
Using the \/ button, select the Swap prog option.
Using the OK button, enter the swap function.
Using the 0-9 digit, enter the new programme number(3 digits).
Press the OK button to confirm, the programme numbers are swapped.
Norm : Allows to change the audio norm.
Using the \/ button, select the Norm option.
Using the < / > buttons, select the norm.
Note : the following norms are available to choose from : I for the UK and Ireland, L/LP for France and Luxembourg,
D/K for Eastern Europe, the Middle
East and Asia, B/G for Western Europe, Australia and New Zealand.
Skip : Allows to skip a channel.
Using the \/ button, select the Skip option.
Using the < / > buttons, select On, the channel will be skip.
Skip : Allows to skip next channel when it is on, and Using the < / > buttons,
select store prog: ok.
Repeat this procedure to skip other channels.
Fine tuning : If the picture is not clear, you can adjust the setting.
Using the \/ button, select the Fine tuning option.
Using the < / > buttons to find the good tuning point.
Manual Search : Allows to launch a manual search.
Using the \/ button, select the Manual Search option.
Using the < / > buttons, start the search in decreasing or increasing order.
The search will stop at the first channel found.
If you wish to memorise the channel, select Store Program option using the
^ button and proceed as indicated in previous page. Otherwise, continue the
search using < / > buttons.
42‟‟ LCD TV Hannspree AT06
14
Main Menu
Channel list
Favourites
Guides
Settings
Common Interface
INPUT SELECTION
To select TV/VIDEO source:
To select desire input source, press the SOURCE button to display the
selection menu.
Using the ^ / \/ buttons to select each input sources.
Press the OK button to display the desire input source.
DTV MENU
First-Time Installation
When the system is first switched on, the Reference Application attempts to configure itself for the first time. This is
called ”First Time Installation”.
The user is then asked if they wish to perform an automatic tune for services. Automatic tuning functionality is
described later in this document. When the automatic tune finishes and services have been found, the lowest
number service is selected and a banner describing that service is shown. A user may have chosen not to perform
an automatic tune or no services may have been found by an automatic scan. In this instance the user may use the
“Main Menu” to automatically scan again or perform a manual scan. The Reference Application also provides the
facility for the user to force to trigger a “First Time Installation”. This facility can be found in the “Main Menu” under
the “Installation” option.
A “Main Menu” is provided to enable the user to configure elements of the Reference Application. In “normal
viewing” operation a user can access the “Main Menu” by pressing the “DTVMENU” key. The “Main Menu” is
hierarchically organized into categories in order to fit on the screen.
Channel List
A user may configure the Reference Application to use exclusively TV, Radio or Data services, this feature is know
as channel List Model.
A user can select a channel List Mode using the configuration dialog; it is permitted to select a channel List Mode
that contains no services.
When the channel list mode is enabled the program up and down buttons on the remote control will only select those
services in the current channel List Mode. And all EPGs will only show those services in the current Channel List
Mode. It is still possible to select a service using the services even if it is not a member of the currently selected
channel List Mode. Note that if the user has selected a favourites list then the Channel List Mode acts as a filter on
top of the selected favourites list.
42‟‟ LCD TV Hannspree AT06
15
Guides
Now/Next EPG
List Schedule EPG
Time line schedule EPG
Settings
Configuration
Language
Installation
Please press the OK button on your remote control to tune to the highlighted channel. Press DTV MENU to exit this
screen.
Edit Favourites Lists
A favourites list enables the user to select a subset of services they consider favourite. The Reference Application
allows the user to have up to five different favourites lists. Favourites lists are defined in the favourites dialog that
can be accessed by selecting the favourites button on the channel list dialog and via the Main Menu.
Press the OK button on your remote control to add the channel to the highlighted favourites list. An icon indicates
which favourites list a channel is in.
Now/Next EPG
An EPG dialog is provided that allows the user to view the current and next programme playing on each service.
In this dialog a list of channels and the corresponding current and next programmes is displayed. The user can
navigate up and down the list of channels and highlight either the now or next programme. Information for the
highlighted programmes can be displayed by pressing “Info”. This information includes the start/end time of the
programme, the programme genre in brackets, and a synopsis of the programme content.
A user may select a service by highlighting a program in the „now” list and pressing the “OK” key. Pressing the “SUBTITLE” key the user may select a genre to highlight events with the selected genre in the EPG.
The Now/Next Electronic Program Guide cannot be accessed if there are no services available.
List schedule EPG
User can set up Program schedule list
Time Line Schedule EPG
Extended Schedule EPG information is presented using a list format, either on a banner for the current service, or as
a full screen dialog showing multiple services.
Configuration
Time Zone: Press RIGHT/LEFT to select the time zone you are in. Press DTV MENU to exit this screen. (Inc.
GMT/CET)
DST: Press RIGHT/LEFT to select or deselect DST mode, Press DTV MENU to exit this screen.
Subtitle: Press RIGHT/LEFT to select subtitle on or Off, Press DTV MENU to exit this screen.
Banner: 2/4 seconds.
Favorite Mode: Press RIGHT/LEFT then select to choose favourite mode. Press DTV MENU to exit this screen.
Please remember that at least one favourite channel be selected before turning favourites on.
Channel List: Press RIGHT/LEFT then select to choose channel list mode, you can select show all channel, TV
only, Radio only and Text only, Press DTV MENU to exit this screen.
Parental Settings: Press SELECT to enter the parental lock menu. Press DTV MENU to exit this screen.
If you don‟t know how to use above function, you can select i info button in remote control for get information, press
i info button again will exit.
Language Settings
System: To change the system languages, this changes the language used in all menus and dialogs.
Noted: Pan Europe system language include: English, German, French, Italian, Spanish, Danish, Norwegian,
Swedish, Finish, Portuguese, Polish and Dutch.
UK system language includes: English, Welsh and Gaelic.
42‟‟ LCD TV Hannspree AT06
16
Installation
Automatic Search
Manual Search
First Time Installation
Channel Number:
Manual tuning:
Do you want to start automatic search? Your
Previous channel list will be replaced.
YES
No
Audio: Displays a dialog enabling the preferred language to be set, this is the language to be used for all channels if
it is available.
Subtitle: Displays a dialog enabling the preferred language to be set, this is the language to be used for all channels
if it is available.
Current: Displays a dialog enabling the current language to be set, this is the language to be used for the current
selected channel, please note that only languages available with the currently selected channel will be displayed.
Automatic Search
Automatic search is the ability for the reference application to scan each other (Frequency) for services.
Whilst performing an automatic tune no service will be selected. A dialog is displayed during automatic tuning that
shows the progress of the scan through the channels.
The user may cancel automatic tuning. If the previous list already stored, the lowest number from the service list, it
will return to “normal viewing” operation.
The Reference Application can support up to 70 services at any one time.
When you select Automatic search, press OK button in remote control, and will start to automatic search.
Manualsearch
Manual Search
Signal Quality:
Signal Level
Manual search allows the user to scan an individual channel (frequency) for services .The user can perform a
manual tune by selecting an option on the “Main Menu”. Whilst performing a manual tune no service will be selected.
The user enters the channel number to be scanned; only those channels supported by the tuner may be entered.
The Manual tuning dialog displays a bar indicating the quality and strength of the signal of the currently selected
channel. The user can then choose to scan the selected channel for services; a separate dialog is displayed
showing the service found whilst scanning is taking place. Newly discovered services are merged with the current
list of services. The user may cancel manual tuning; in such cases any newly discovered services are disregarded.
When a manual tune is complete the application will attempt to select the previously selected service and return to
“normal viewing” operation. In cases were there was not a previously selected service the application will attempt to
select the service with the lowest number.
The Reference Application can support up to 70 services at any one time.
Press 0 to 9 to select a channel number; select to start searching for channels, DTV MENU to exit this screen.
First time installation
42‟‟ LCD TV Hannspree AT06
17
Are you sure your want to delete all channels and
settings for first time installation?
YES
No
Common Interface
Choose this will return to the original condition, you can choose country as first time in installation. And search
channel again. When you select it, you will see as following:
CommonInterface
If no CA module is inserted, then the system display “No common interface mode detected”.
If a CA module without a smartcard is inserted. Then the system displays “Please insert your smartcard.
If a CA module with a smartcard is inserted. Then the CI menu is displayed. Using this menu. The user can read the
smartcard contents. The data shown depends on CA vendor and CA smartcard version.
42‟‟ LCD TV Hannspree AT06
18
2.3 How to Connect
Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take your
precautions not to damage the screen.
1: Audio output
2: SPDIF output(appear in Digital TV )
3: SCART2(CVBS)/SCART2-S
4: SCART1(RGB/CVBS)
5: DTV(appear in Digital TV )
6: ATV
7: Component video(HDTV)
8: Component Audio
9: VGA
10: VGA Audio input
11: HDMI2
12: HDMI1
13: AC power
14: S-Video
15: AV1(CVBS)
16:AV1/S-video Audio intput
17: HEADPHONE
18: CI card
42‟‟ LCD TV Hannspree AT06
19
SCART CONNECTION
VIDEO RECORDER
How to connect
1. Connect the antenna cable to the RF IN port of your VCR.
2. Connect another RF cable from the port of your VCR to the antenna port of you ATV set. If you have connected
the video/audio cable to the video AV port, you may have better sound and picture when playing the VCR.
If your VCR has an S-VHS video jack:
For improved picture quality, connect a S-Video cable with the S-Video input on the ATV.
S-Video does not provide audio, audio cables must still be connected to provide sound(AV and S terminal share one
audio input).
Watching VCR
1. If you use connection ATV, select the TV channel auto search.
2. If you use connection AV, select video AV1 input.
3. Insert videotape in the VCR and press the PLAY button.
How to connect
1.The SCART socket can be connected a VCR, a camcorder, a DVD player, a satellite receiver, a decoder or a
game console form SCART cable.
2.The 21pin SCART socket can also be used as an output to Audio/Video equipment.
How to use
Scart source has the first priority. For example: when playing under other sources such as TV/AV/S-Video/VGA, if
we input the scart signal, the TV will switch to Scart menu automatically.
CAMERA CAMCORDER VIDEO GAME SET
How to connect
1. Connect the camera, camcorder and game set to the ports of the audio/video set.
2. The camcorder may get better picture by connecting a S-VHS cable between the S terminal and the Audio set.
How to use it
1. Select the video AV or S terminal input.
2. Enable the exterior AV equipment.
Warning: In case you notice scrolling images, wrong colors or no color, no picture or even combinations of these, on
your screen, check if the connections are done in the right way. Check if the cable colors match with the Input
connector colors.
42‟‟ LCD TV Hannspree AT06
20
WALL Mount
Use of Wall Mount Bracket:
1.Remove the units M4.0 screws.
2.Remove the base ass‟y.
3.Fasten four units M6.0 X 10mm screws to secure the wall mount bracket.
HEADPHONE
1. The headphone jack is located at the side of the TV.
2. The MUTEkey on the remote control works on both internal speaker and the headphone.
3. Use volume key to adjust the volume.
TIPS
Care of the screen
Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently.
Unplug the power socket before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft,
clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol
cleaners.
Mobile telephone warning
To avoid disturbances in picture and sound, malfunctioning of your TV or even damage to the TV, keep away your
mobile telephone from the TV.
End of life directives
We are paying a lot of attention to produce environmentally friendly in green focal areas. Your new receiver contains
materials which can be recycled and reused.
At the end of its life specialized companies can dismantle the discarded receiver to concentrate the reusable
materials and to minimize the amount of materials to be disposed of.
Please ensure you dispose of your old receiver according to local regulations.
42‟‟ LCD TV Hannspree AT06
21
2.4 Front Panel Control Knobs
S
1, 2: + / - Key : Press to confirm your function selection and adjustment.
3, 4: Up / Down Key : Press to perform select function and channel.
5: MENU Key : Press to show the OSD menu and exit OSD menu.
6: Source Key : Press to select your input source.
7: Power Key : Press to turn on or off the TV.
42‟‟ LCD TV Hannspree AT06
22
Pin No.
Description
Pin No.
Description
1
Red Video 9 No Pin!
2
Green Video
10
Sync Ground
3
Blue Video
11
Not Used
4
Not Used
12
Serial Data for DDC
5
Ground
13
H-Sync.
6
Red Video Ground
14
V-Sync.
7
Green Video Ground
15
Serial Clock for DDC
8
Blue Video Ground
Composite Video
Video system
NTSC/PAL/SECAM
Amplitude
1.0Vpp (including sync )
Impedance
75 ohm terminated
S-Video
Video system
NTSC/PAL/SECAM
Y signal amplitude
1.0Vpp (including sync )
C signal amplitude
0.286Vpp
Impedance
75 ohm terminated
SCART (RGB)
Video system
PAL/SECAM
R/G/B signal amplitude
0.7Vpp
CVBS signal amplitude
1.0Vpp (including sync )
Impedance
75 ohm terminated
SCART (Composite)
Video system
PAL/SECAM
Amplitude
1.0Vpp (including sync )
Impedance
75 ohm terminated
HDMI
( EIA/CEA-861B )
Output Formats
H/V Frequency
Component
1.
480 I ( SDTV)
15.734K / 60 HZ
2.
480 P (SDTV)
31.469K / 60
3.
576 I(SDTV)
15.625K / 50
4.
576 P (SDTV)
31.250K / 50
5.
1080I /60 (HDTV)
33.750K / 60
6.
1080I /50 (HDTV)
28.125K / 50
1611
15
5
10
3. Input/Output Specification
3.1 RGB Signal input
15 - Pin Color Display Signal Cable
3.2 CVBS/S-VIDEO/SCART /COMPONENT/HDMI INPUTS
42‟‟ LCD TV Hannspree AT06
23
7.
720P /60 (HDTV)
45.00 K / 60
8.
720P /50 (HDTV)
37.50 K / 50
9
640X480 (DVI)
60 HZ
10
640X480 (DVI)
72 HZ
11
640X480 (DVI)
75 HZ
12
720X400 (DVI)
70 HZ
13
800X600 (DVI)
60 HZ
14
800X600 (DVI)
72 HZ
15
800X600 (DVI)
75 HZ
16
1024X768 (DVI)
60 HZ
17
1024X768 (DVI)
75 HZ
18
1360X768 (DVI)
60 HZ
Horizontal
Vertical
Sync Polarity
Presence
Screen Mode
Dots
×Lines
Frequency
Frequency
Horizontal
Vertical
Horizontal
Vertical
Normal
FULL
(kHz)
(Hz)
(4:3)
(16:9)
720×400
31.47
70.08
NEG
POS
YES
YES
YES
YES
640×480
31.50
59.94
NEG
NEG
YES
YES
YES
YES
640×480
37.50
75.00
NEG
NEG
YES
YES
YES
YES
640×480
37.86
72.81
NEG
NEG
YES
YES
YES
YES
800×600
37.90
60.32
NEG
NEG
YES
YES
YES
YES
800×600
46.88
75.00
NEG
NEG
YES
YES
YES
YES
800×600
48.08
72.19
NEG
NEG
YES
YES
YES
YES
1024×768
48.36
60.00
NEG
NEG
YES
YES
YES
YES
1024x768
60.02
75.03
POS
POS
YES
YES
YES
YES
1360×768
47.71
60.02
POS
POS
YES
YES
YES
YES
4.RGB input signal timing
42‟‟ LCD TV Hannspree AT06
5.Mechanical Instructions
1. Remove the screws marked in red
2. Remove the screws marked in red
24
42‟‟ LCD TV Hannspree AT06
3. Remove the screws marked in red to remove the shield.
4. Remove the screws marked in red to remove the shield.
5. Remove the screws marked in red .
25
42‟‟ LCD TV Hannspree AT06
喇叭PIN*2
Speaker line PIN*2
IR wire PIN
LVDS wire PIN
边板线PIN*2
PIN*2
6.Disconnect the connector or wire.
26
42‟‟ LCD TV Hannspree AT06
7.Remove the screws on the boards marked in red to remove the boards
8. Remove AC switch and the side board
27
42‟‟ LCD TV Hannspree AT06
9. Remove the screws marked in red to remove .
10. Panel
28
42‟‟ LCD TV Hannspree AT06
NG
Repair the key board
OK
Check 5V_SB
NG
Return to “1”
OK
Check PWR_ON signal
NG
Check Q706, Q703
NG
Replace Q706, Q703
OK
Check U203, U401
NG
Replace U401 or U203
OK
OK
Check main board power supply part
Check key board
Check I2C communication
NG
Check power cord and board interface
Plug in power cord and interface
OK
Check F901, BD901, C907
NG
Replace F901 or BD901 or C907
OK
Check IC901, Q901
Check D905, D914
NG
Replace IC901 or Q901
OK
Check T901
OK
Replace T901
Replace D905 or D914
OK
NG
NG
Check ZD901
NG
Replace ZD901
6. Repair Flow Chart
1. No Power (No LED indicator)
2. Can not start (LED indicator yellow)
29
42‟‟ LCD TV Hannspree AT06
Check the source
OK
Reset source
NG
Check signal filter circuit
NG
Replace the filter or inductance
OK
NG
Analog TV signal
Check TV system setup
OK
Check TU1
Replace T1
Component, PC signal
Check U202
NG
Replace U202
OK
Check U401
NG
Replace U401
OK
NG
Replace U1
Check U1
Digital TV signal
Check TV system setup
NG
Check TU1
OK
NG
Replace U4
OK
Power supply U4
Check U21
Check U6,U7
Check U12,U17
OK
OK
OK
Check U9,
HDMI
Check u504
Replace U504
OK
OK
Check panel
Replace TU1
OK
3. Abnormal display
30
42‟‟ LCD TV Hannspree AT06
Check the source
OK
Reset source
NG
Check signal filter circuit
NG
Replace the filter or inductance
OK
Scart,AV,Component,PC
signal
Check Earphone jack
NG
Replace the Earphone jack
OK
Check speaker
NG
Replace U101
HDMI
NG
Analog TV signal
Check TV system setup
OK
Check TU1
Replace TU1
OK
NG
Replace U1
Check U1
Digital TV signal
Check TV system setup
NG
Check TU1
OK
NG
OK
Power supply U4
Check U101
Replace TU1
Replace TU4
Check U21
Check U6,U7
Check U12,U17
OK
OK
OK
Check U9,
OK
Check U501
Replace U501
U601
U603
Replace U601
Replace U603
Replace Speaker
NG
NG
OK
NG
OK
NG
4.No sound
31
Loading...
+ 65 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.