6. Dissembling the stand base....................................................37
7. Using the Cable Organizer .....................................................38
2
Page 4
Regulatory Information
Description of Warning Symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
This symbol is used to alert users
to pay attention to important
descriptions regarding usage,
maintenance (repair), and
additional important information
related to this TV.
CAUTION
This symbol is used to alert users
to the risk of electric shocks due
to dangerous and uninsulated
components.
CE Conformity Statement
This device is in conformity with the requirements of EU Council Directive
2004/108/EC on the approximation of the laws of the Member States relating to
electromagnetic compatibility and Directive 2006/95/EC on the harmonization of
the laws of Member States relating to electrical equipment for use within certain
voltage limits. Hannspree cannot accept responsibility for any failure to satisfy
the requirements resulting from a non-recommended modification of the device.
English
3
Page 5
English
Installation Safety Notes
Location
Avoid allowing the TV to get prolonged exposure to sunlight or other strong
sources of heat. Leave sufficient distance between the TV and the wall to
provide enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Safety Notices
Notes:
•The LCD TV is for entertainment use only and visual display
tasks are excluded.
•This device uses a VGA connector to connect to a PC. To reduce
the influence of main frequency on the source signal, use a VGA
monitor cable with ferrite shield.
4
Page 6
Personal Safety
1. To avoid overloading the power supply, never plug too many electrical
devices into an outlet, power strip, or extension cable.
2. Dangerous high-voltage electric power components are located inside the
TV. To avoid electric shock, do not disassemble the casing.
3. Do not place or drop metals, small objects, or flammable materials into
the vent of the TV.
4. If the TV is dropped, falls down, or is otherwise damaged, unplug the
power cord immediately and contact an authorized service technician.
5. If any fluid is sprayed or dropped into the TV, contact an authorized
service technician.
6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the
screen is broken, do not touch the broken glass.
7. Do not allow children to use the TV unattended.
8. Be careful when disconnecting the power plug. Hold the plug. Do not
attempt to disconnect the plug by pulling on the power cord.
Installation
1. Do not place the TV in locations where there is excessive steam or dust.
2. Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet,
or in a sealed cabinet.
3. Install the outdoor antenna away from power transmission lines to avoid
possible danger.
English
5
Page 7
English
Warranty and Service
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD
TV). Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or
operating your TV. To ensure the safe and correct installation and operations of
the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV.
The information in this manual has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not
be liable for direct, indirect, special, exemplary, incidental or consequential
damages arising from any defect or omission in this manual, even if advised of
the possibility of such damages in advance.
For complete warranty service information, please refer to the “Warranty Card”
enclosed with your TV.
All rights reserved. This manual is protected by copyright and distributed under
licenses restricting its use, copying and distribution. No part of this manual may
be reproduced in any form by any means without the prior written authorization
of Hannspree. The TV described in this manual may include copyrighted
software of Hannspree (or other third parties). Hannspree (or other third parties)
preserves the exclusive rights for copyrighted software, such as the right to
distribute or reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the product
described herein shall not be distributed, modified, reverse engineered, or
reproduced in any manner without the prior written authorization of Hannspree
(or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other
product names, trademarks or logos mentioned herein are used for identification
purpose only, and may be the trademarks or registered trademarks of their
respective owners.
The purchase of the product described herein shall not be deemed to grant,
either directly or by implication, estoppel or otherwise, any license under the
copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a
product.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
7
Page 9
English
1
Getting Started
1.1Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or damaged.
•TV
•User’s manual
•Quick start guide
•Warranty card
•Power cord
•Remote control and batteries
According to WEEE regulation, this TV can’t be handled as normal
trash in Europe when it is out of usage. Please refer to the recycle
information from our website to handle it.
As an ENERGY STAR
the ENERGY STAR® guidelines for energy efficiency.
®
Partner, Hannspree has determined that this product meets
– R/L audio inputs
– PC line input
– 3.5 mm stereo earphone
output
• On-Screen Display (OSD) menu
system
• Teletext (TV RF+SCART) 1.5v.
with 1000 pages memory
• Built-in stereo speakers
• Image Enhancement Technology
– 3:2/2:2 pull down
– 3D Comb Filter
– HD-ready TV
• Noise Reduction
• Advanced 3D de-interlacing
• Edge Enhancement
You can watch SECAM/ PAL/ DVB-T broadcast, cable, or digital television channels,
and easily connect a VCR, STB or DVD player to the SCART, component, and HDMI
input ports (location of these ports depends on model). You can also use the TV as a
monitor for your PC by connecting it through the VGA port.
Convenient control buttons located on the TV and a handy remote control let you
change channels, adjust the volume, and change display settings through an easyto-use on-screen display menu system. The built-in stereo speakers provide full rich
sound and a convenient audio output port lets you connect to an external audio
system or earphones.
1.3Features
English
Note:
• The supporting devices mentioned in this manual may vary on different models.
For more information, please refer to the manufacturer’s user manual or the
Quick Start Guide of your TV model.
9
Page 11
English
1.4Control Panel
DescriptionButtonFunction
PowerPress to turn the TV on or off.
Input sourceINPUTPress to select the proper input source.
MenuMENUPress to open the OSD menu.
Press to increase the program number or
Program selectP S
Program selectP T
move upward to the previous item on the
OSD menu.
Press to decrease the program number or
move downward to the next item on the OSD
menu.
Volume adjustVOL +
Volume adjustVOL -
Remote IR
sensor
Power/ Standby
indicator
SpeakersDeliver high-quality sounds.
Press to increase the volume or move to the
right on the OSD menu.
Press to decrease the volume or move to the
left on the OSD menu.
Receive incoming remote control commands.
Indicate power or standby status.
10
Page 12
1.5Input and Output Jacks
DescriptionConnectorFunction
English
Cable/Antenna Connect to an antenna or cable TV.
Earphone Output
Component
Inputs (audio)
Component
Inputs (Video)
Y
PC Audio InputConnect to a PC’s line/ audio out port.
DTV
/
TV
CABLE/ANTENNA
EAR
PHONE
AUDIO
RL
P
P
B
PC LINE IN
Connect to earphones or external
speakers with built-in amplifier.
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to an external device, such as a
R
VCR, STB, or a DVD player.
Connect to an external device, such as a
SCART1 IN/OUT
SCART 1 IN / OUT
SCART 2 IN
SCART 2 IN
VGA (PC) InputConnect to a PC’s VGA port.
VGA
VCR, STB, or a DVD player with AV, SVideo, RGB, L/R IN, Analog TV Out, and
L/R Out.
Connect to an external device, such as a
VCR, STB, or a DVD player.
ServiceService only. Not available for users.
SERVICE
11
Page 13
English
LAST
DescriptionConnectorFunction
Connect a HDMI equipment or an HDMI-
HDMI 1 Input
HDMI 2 Input
HDMI 1
HDMI 2
DVI adapter cable to devices such as a
DVD player or set-top box.
Connect a HDMI equipment or an HDMIDVI adapter cable to devices such as a
DVD player or set-top box.
Power ConnectorConnect to the included power cord.
Use to select a program directly. Press 0-9 to
enter the program numbers (press 1 and 0 for
program 10).
Press to display the features contained.
Press to display current channel/ program
information.
Press to turn the on-screen display (OSD)
menu on/ off; confirm the setting.
12
Page 14
DescriptionIconFunction
V
OKOKPress to confirm selection.
English
Arrows
Electronic
Program
Guide
Teletext modeTEXT
Volume adjust
Mute
Dual sound
Select
program
IndexINDEX
MixMIX
EPG
OL/ VOL
MUTE
P /
P
Press up, down, left or right to scroll through
the on-screen display menus.
Press to display detailed programming
information for channels.
Press to active teletext.
Press VOL
Press VOL
Press to eliminate sound. Press it again or
press the volume adjust buttons to restore
sound.
Press to change the multi sound selection of
the TV channel.
Press PS to increase the program number.
Press PT to decrease the program number.
Press to display a table of the available teletext
subjects.
(Programmable in the teletext mode only)
Press to display the teletext over the program
on the screen.
(Programmable in the teletext mode only)
+ to increase audio volume.
- to decrease audio volume.
SubpageSUBPAGE
Adjust sizeSIZE
Press to go to the sub page. (Programmable in
the teletext mode only)
Press to adjust screen size. (Programmable in
the teletext mode only)
13
Page 15
English
DescriptionIconFunction
Press to inactivate automatic page change
HoldHOLD
RevealREVEAL
which only occurs when more than one teletext
page exists.
(Programmable in the teletext mode only)
Press to display the hidden information, such
as solutions to puzzles. (Programmable in the
teletext mode only)
Subtitle SUB.TITLE
Favorite
channel
FreezeFREEZE
Aspect ratioASPECT
Picture modePIC
Sleep timerSLEEP
Note:
•For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at TV.
•The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
•Aim the transmitter on the remote control at the signal sensor and ensure
that there are no obstacles between them.
FAV.Press to select favorite channels.
Press to display the subtitles while playing
movies.
Press to pause a video frame on-screen.
(Programmable in the TV source only)
Press to adjust the width-to-height ratio of the
image with aspect ratio: Auto, Full, Normal,
Panorama, Zoom, Subtitle.
Press to select Standard/ Movie/ Sport/
Concert/ Game/ User.
Press repeatedly to set the sleep timer (15, 30,
45, 60, 90 or 120 minutes).
Cancel the timer by selecting the Sleep Off
option.
14
Page 16
1.6.1Inserting the Remote Control Batteries
(A)
(B)
(C)
1 Open the battery compartment cover at the back of the remote control (A).
2 Insert the batteries paying attention to the polarity markings inside the battery
compartment (B).
3 Replace the battery compartment cover (C).
English
15
Page 17
English
CAUTION
•If the remote control is not used for a long period, remove the batteries
and store them properly.
•Handle damaged or leaking batteries carefully, and wash hands with
soap if they come in contact with leaked chemical fluids.
•If your remote control has two batteries, do not mix new and old
batteries, or the life of the new batteries will be shortened. Chemical
fluids may leak from the old batteries.
•Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
•Refer to your local recycling or waste disposal rules and contact a local
waste disposal vendor to dispose of used batteries.
•The remote control cover may have a magnet in it, so do not place
magnetic sensitive items such as watches, credit cards, or flash media
close to the cover.
•Do not use force when pulling the remote control cover open; you may
damage the hinge.
16
Page 18
2
CABLE/A
NTENNA
TV
/
DTV
Ground Clamp
Ground
Coaxial Cable
Antenna
Setting up your TV
2.1Basic Connections
2.1.1Power Connection
1 Connect the power cord to the AC IN input jack on the rear of the TV.
2 Insert the plug at the other end of the power cord into a power outlet.
2.1.2Connecting an Antenna or Cable TV
Connect one end of the VHF/UHF (Antenna) or CATV cable to TV/DTV jack on the
rear of the TV.
English
Note:
• Images are for illustration only and may vary by model or region.
• If you cannot receive channels after connecting to an antenna or cable TV line,
try scanning for channels.
17
Page 19
English
Speakers
Headphones
(Built-in Amplifiers)
2.2Connecting External Devices
Connect external devices such as VCRs, STBs, DVD players, video game consoles,
earphones, or a PC to the TV using the appropriate ports on the rear of the TV.
2.2.1Connecting External Earphones
EAR
PHONE
Note:
•External speakers or headphones are not included with the TV.
•The internal TV speakers will not output sound when headphones are
plugged in.
•Use external speakers with built-in amplifiers only.
•Only one external device for sound can be connected at a time.
18
Page 20
2.2.2Connecting to AV Devices
HDMI 1
A
B
C
HDMI 2
AUDIO
Y
P
B
RL
P
R
R
-A
U
D
IO
-L
/M
O
N
O
V
ID
E
O
S
.V
ID
E
O
SCART 1 IN / OUT
S-VIDEO
LR
VIDEO
P
R
LRHDMIY P
B
SCART
SCART 2 IN
The following diagram illustrates how to connect the AV devices to your TV via HDMI
(A), Component (B), and SCART (C) ports.
English
19
Page 21
English
VCR
STB
DVD
Video Cable
Audio Cable
(Optional)
(Optional)
2.2.3Connecting a VCR/ STB/ DVD Player Using
Component Video
Connect the TV to a VCR/ STB/ DVD player using the component video inputs.
AUDIO
RL
Y
R
P
P
B
2.2.4Connecting a PC using VGA
Connect the TV to your PC to use it as the monitor using the VGA port as shown.
1 Connect the VGA port of the TV to the VGA output of the PC.
2 Connect the line out port of the PC to the PC LINE IN port of your TV to listen to
audio from the PC.
20
VGA
PC LINE IN
Page 22
2.2.5Connecting a PC using DVI
HDMI
Connect the TV to your PC to use it as the monitor using the DVI port as shown.
1 Connect the HDMI port of the TV to the DVI output of the PC.
2 Connect the line out port of the PC to the PC LINE IN port of your TV to listen to
audio from the PC.
English
HDMI
PC LINE IN
HDMI
2.2.6Connecting HDMI
HDMI (High Definition Multimedia Interface) assures that the best video signal is
always sent from source to the TV. Refer to the following illustration to connect an
HDMI device to the TV.
Note:
When the HDMI cable is connected, connecting the audio cable is not necessary.
However, it is necessary to do so if a HDMI to DVI cable is connected.
21
Page 23
English
R-AUDIO-L/MONO
VIDEO
S.VIDEO
SCART 1 IN / OUT
SCART 2 IN
2.2.7Connecting a VCR/ STB/ DVD Player using SCART
Connect the SCART (optional) to connect a TV, VCR, VCD, DVD player or video
game console. You can choose to use a SCART cable or adapter for the connection
depending on the ports available on your player.
Note:
•The S-Video connector and AV connectors cannot be connected at the
same time, or the wrong signals might be generated.
•The cables are color-coded (black, red, white, and yellow). Connect each
color-coded cable to the appropriate connector on your device.
22
Page 24
2.3Using the TV
2.3.1Turning the TV On and Off
1 Press on the control panel or remote control. The power LED indicator on the
TV changes from amber to blue, indicating that the TV is on.
2 Press again. The power LED changes from blue to amber, indicating that
the TV is off.
2.3.2Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal to set TV source for channel search.
2.3.3Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1 Press MENU on the control panel or remote control, then select to enter the
Channel menu.
2 Select Auto scan, then Start option.
3 Press OK on the remote control to run the channel search.
2.3.4Selecting Channels
•Press PS on the remote control or control panel to increase the channel number.
•Press PT on the remote control or control panel to decrease the channel
number.
•Enter the specific channel number by pressing the number buttons on the remote
control.
English
2.3.5Adjusting the Volume
1 Press VOL+ on the control panel or remote control to increase the volume.
2 Press VOL- on the control panel or remote panel to decrease the volume.
3 Press MUTE to eliminate sounds, and press MUTE again or press the volume
buttons to restore the original volume.
23
Page 25
English
CURRENT MENU:
Displays the title of the
currently selected menu.
MAIN MENU:
Displays a list
of menu items.
The selected
item is
highlighted by
a dark blue
color than
other menu
items.
INSTRUCTIONS:
Quick instructions for
adjusting the settings.
ADJUSTABLE Options:
Displays the setting/value
of the adjustable options.
Setting
Aspect
HDMI Scan Info
Menu Language
Blue Mute
Sleep
SCART
Reset Setting
ExitSelect
MENU
Enter
OK
Auto
Auto
English
On
Off
3Adjusting On-Screen Display
(OSD) Settings
The On-Screen Display (OSD) menu system provides a quick and simple method to
adjust the TV settings. The OSD menu can be accessed conveniently through the
buttons on the remote control.
Before going into details of each OSD option, you may get acquainted with the
placement of the OSD system:.
FunctionTV Control PanelRemote Control
OSD MenuMENU
UpPS
DownPT
Select/ IncreaseVOL +
Select/ DecreaseVOL –
ExitMENU
24
MENU
Arrow
Arrow
Arrow
Arrow
MENU
Page 26
3.1OSD Setting Menus
Follow the instructions indicated on the down side of the OSD Function Menu. Press
PS/Ton the control panel or / arrow keys to scroll through the menus, VOL +
on the control panel or the arrow key to select an item, or MENU to exit the OSD
menu.
The following menus can be set by different adjustment methods.
3.2Adjusting Picture Settings
English
1 Press MENU to enter the OSD Main Menu
screen. The Picture menu is then displayed.
2 Press to enter the Picture menu.
3 Press / to select an item.
4 Press / to adjust the scales or options
5 Press OK to confirm the setting. Press MENU to return to the Picture menu.
6 Press MENU to exit the OSD menu.
7 The Picture menu can be used to adjust the Scenario Mode, Brightness, Contrast,
- ACM (Adaptive Contrast Management) delivers high contrast ratio and optimum
brightness to produce the best possible picture. It enhances the panel contrast by
making bright areas brighter and dark areas darker.
- DCG balances the screen contrast. When the backlight is dark, the image turns
bright. When the backlight is light, the image turns dark.
Note:
The options available on the OSD may vary depending on the input signal source.
3.3Adjusting Sound Settings
1 Press MENU to enter the OSD Main Menu
screen.
2 Press to select the Audio menu.
3 Press to enter the Audio menu.
4 Press / to select an item.
5 Press / adjust the scales or options
settings.
6 Press OK to confirm the setting. Press MENU to return to the Audio menu.
7 Press MENU to exit the OSD menu the OSD menu.
8 The Audio menu can be used to adjust the Scenario Mode, Treble, Bass, Balance,
Sound Effect, and Reset Audio settings.
• The Scenario Mode can be set to Standard, Movie, Sport, Concert, Game, or User.
Note:
The options available on the OSD may vary depending on the input signal source.
26
Page 28
3.4Adjusting Channel Settings
1 Press MENU to enter the OSD Main Menu screen.
2 Press to select the Channel Management
menu.
3 Press to enter the Channel Management
menu.
4 Press / to select an item.
5 Press / adjust the scales or options settings.
6 Press OK to confirm the setting. Press MENU to return to the Channel menu.
7 Press MENU to exit the OSD menu.
8 The Channel Management menu can be used to perform a channel search and to adjust
the Country, Daylight Saving, Time Zone, Auto Scan, Manual Scan, Channel Edit,
Preferred Audio, Preferred Subtitle, Subtitle Type, and Digital Teletext Language
settings.
• The Country can be set to UK, France, Germany, Italy, Spain, Swizerland,
Denmark, Belgium, Netherlands, Luxembourg, Czech Rep., United Arab
Emirates, Saudi Arabia, Portugal, and Other.
• The Daylight saving can be set to On/Off.
• The Time Zone will display the location of the Time Zone option.
• Select Auto Scan to activate the automatic TV channel search.Select Manual Scan to
search the TV channels manually.
Channel Management
Country
Daylight Saving
Time Zone
Auto Scan
Manual Scan
Channel Edit
Preferred Subtitle
Subtitle Type
Digital Teletext Language1
UK
Off
UK
Off
Normal
English
Enter
OK
MENU
English
ExitSelect
Auto Scan
Status: Scanning.
Analog Channels:0
Digital Channels:0
Manual Scan
Analog Manual Scan
Digital Manual Scan
5%
Back
MENU
SelectEnter
Cancel
MENU
OK
27
Page 29
English
Setting
Aspect
HDMI Scan Info
Menu Language
Blue Mute
Sleep
SCART
Reset Setting
Auto
Auto
English
On
Off
9 Press to enter the Channel Edit menu, the Channel Editor allows you to edit the
detailed items, including Name, Skip, and Reorder for each channel.
Channel Edit
Name
Skip
Reorder
Back
MENU
SelectEnter
OK
• To change the channel name, select Name, and input the channel name you prefer
using the numeric buttons 0 ~9 on the remote control. Refer to the following list for the
displayed letter for each corresponding press of the numeric buttons. Press OK.
1 16 6, M, N, O, m, n, o
2 2, A, B, C, a, b, c7 7, P, Q, R, p, q, r
3 3, D, E, F, d, e, f8 8, T, U, V, t, u, v
4 4, G, H, I, g, h, i9 9, W, X, Y, Z, w, x, y, z
5 5, J, K, L, j, k, l0 0, Space
• The Preferred Subtitle can be set to English, French, German, Italian, Spanish,
Portuguese, Dutch, Polish and Off.
• The Subtitle Type can be set to Normal and Hearing Impaired.
• The Digital Teletext Language can be set to English, French, German, Italian,
Spanish, Portuguese, Dutch and Polish.
Notes:
1. The Channel Settings are only available in TV mode.
2. If the country you are in are not listed in Country option, set the default value to
Other.
Name
1
2
3
4
5
6
7
8
9
10
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Back
MENU
SelectEnter
OK
3.5Adjusting TV Settings
1 Press MENU to enter the OSD Main Menu
screen.
2 Press to select the Setting menu entry.
3 Press to enter the Setting submenu.
4 Press / to select an item.
5 Press / to change the scales or
28
options settings.
Page 30
6 Press OK to confirm the changed setting. Press MENU to return to the Setting menu
entry.
7 Press MENU to exit the OSD menu.
8 The Setting menu can be used to adjust the Aspect, HDMI Scan Info, Menu
Language, Blue Mute, Sleep, SCART and Reset Setting.
• The available Aspect selections include Auto, Full, Normal, Panorama, Zoom and
Subtitle.
• The available selections in HDMI Scan Info are Auto, Overscan, Underscan.
• The available Menu Language selections are English, French, German, Italian, Spanish, Portuguese, Dutch and Polish.
• The Blue Mute can be set to On or Off.
• The Sleep can be set to Off, 15, 30, 45, 60, 90 or 120 minutes.
9 The SCART mode selections include SCART1 , SCART2. SCART1: Auto, Mixed, RGB,
CVBS, S-Video. SCART2: CVBS, S-Video, Auto, Mixed. The SCART1 can be set to
AUTO, Mixed, RGB, CVBS or S-VIDEO. The SCART2 can only be set to CVBS, SVideo, Auto, or Mixed.
10 Select Reset Setting to reset settings to the defaults.
English
29
Page 31
English
11 Under the16:9 input signal, the Aspect modes include HDMI, SCART Component, and
TV modes for Video mode selection. The TV mode selection includes Full, Normal,
Zoom, Subtitle, Panorama and Auto. Please see the pictures below for details.
FullNormal
Zoom
Panorama
Note:
The options available on the OSD may vary depending on the input signal source.
Subtitle
Auto
30
Page 32
3.6 Parental Control
Parental Control allows you to block
channels, programs not appropriate to
certain ages, or input devices with a
password you setup.
Press MENU to enter the OSD Main Menu
1
screen.
2 Press to select the Parental Control
menu entry.
3 Press OK to enter the Parental Control
menu.
4 Press / to select Channel Block, Age Rating, Input Block, or Change
Password.
5 Press / to adjust the scales or options settings.
Note:
The original password is set to 0000 by default.
3.7Adjusting PC Setup Settings
Parental Control
Password
Enter
OK
MENU
English
ExitSelect
1 Connect the LCD TV set to your computer.
2 Press INPUT on the control panel or remote
control to switch to VGA mode.
3 Press MENU on the control panel or remote
control to enter PC setup menu.
Picture
Scenario Mode
Brightness
Contrast
Colour Temp
Advanced Picture Adjust
VGA
Reset Picture
Standard
Standard
45
45
4 Press to enter the Picture menu.
5 Press / to select an item.
Enter
OK
MENU
ExitSelect
6 Press / to adjust the scales or options
settings.
7 The PC Setup menu can be used to adjust the Picture, Audio, Setting, and Parental
Control settings.
- The Picture submenu can be used to adjust the Scenario Mode, Brightness,
Contrast, Colour Temp, Advanced Picture Adjust, VGA and Reset Picture settings.
• The Scenario Mode can be set to Standard, Movie, Sport, Concert, Game, or
User.
31
Page 33
English
• The Colour Temp can be set to Standard, Warm, or Cold.
• The Advanced Picture Adjust can be set to Noise Reduction, CTI, Backlight control, ACM or DCG.
- Noise Reduction reduces vidual noise without reducing details. Select from Off,
Low, Medium or High.
- CTI (Colour Transition Improvement) smoothes out the ediges of color images so
that colors can be more precisely reproduced.Select from Off, Low, Medium or
High.
- Backlight control helps to manually turn down the backlight in dark scenes,
generating a deeper black color. Press / to adjust the scales from 0-100.
- ACM (Adaptive Contrast Management) delivers high contrast ratio and optimum
brightness to produce the best possible picture. It enhances the panel contrast by
making bright areas brighter and dark areas darker.
- DCG balances the screen contrast. When the backlight is dark, the image turns
bright. When the backlight is light, the image turns dark.
- VGA can be used to adjust the H Position, V Position, Phase, Clock and Auto
Adjust setting.
- Reset setting resets settings to the defaults.
- The Audio menu can be used to adjust the Scenario Mode, Treble, Bass, Balance,
Sound Effect, and Reset Audio settings.
• The Scenario Mode can be set to Standard, Movie, Sport,
- The Setting menu can be used to adjust the Aspect, MenuLanguage, DPMS, Blue Mute, Sleep, SCART and Reset Setting.
• The available Aspect selections include Full and Normal.
• The available Menu Language are English, French, German, Italian, Spanish, Portuguese, Dutch and Polish.
• The Blue Mute can be set to On or Off.
• The Sleep can be set to Off, 15, 30, 45, 60, 90 or 120 minutes.
• The SCART mode selections include SCART1, SCART2. SCART1: Auto, Mixed,
RGB, CVBS, S-Video. SCART2: CVBS, S-Video, Auto, Mixed. The SCART1 can be
set to AUTO, Mixed, RGB, CVBS or S-VIDEO. The SCART2 can only be set to
CVBS, S-Video, Auto, or Mixed.
• Select Reset Setting to reset settings to the defaults.
Concert, Game, or User.
32
Page 34
• The Aspect modes include HDMI, SCART Component, and TV modes for Video
mode selection. The PC mode selection includes Full and Normal. Please see the
pictures below for details.
English
Full
- The Parental Control requires you to input the set password before you can watch a
password-protected program. The original password is set to 0000 by default.
8 Press OK to confirm the setting. Press MENU to return to the PC Setup menu.
9 Press MENU to exit the OSD menu.
Note:
The PC Setup settings are only available in VGA mode.
Normal
33
Page 35
English
4
Troubleshooting
SituationSolution
•Connect the power cord properly.
•Check if the power LED is on or not.
No picture and sound.
No picture, or poor picture,
sound is OK.
Picture is not in color.•Adjust the colour option in the Picture OSD menu.
Picture is OK, no sound.
One of the speakers has no
sound.
Cannot receive some TV
channels using cable TV.
Want to reset TV settings.
Cannot operate menus.
Screen image turns over.•Make sure the video signal cable is connected properly.
Snow appears on the screen.
Blurred or overlapped
images.
Remote control doesn’t work.
•Press on the control panel or remote control.
•Press Input to cycle through connected video sources.
•Press
•Make sure all cables are connected properly.
•Check the antenna and cable connections.
•Adjust the brightness in the Picture OSD menu.
•Make sure the source device is functioning properly.
•Make sure the audio cable is connected securely.
•Turn the mute off.
•Press VOL + on the control panel or remote control.
•Adjust the balance in the Audio OSD menu.
•Try the Auto Scan function in the Channel Management
•Use the Reset Setting function in the Setting OSD
•If OSD items are colored in gray, the system is in a state
•Adjust the location of the antenna, placing it far from
•Check the antenna and the video signal line connections.
•Adjust the sharpness setting.
•Choose programs with high quality signals.
•Adjust the direction of the antenna or replace the video
•Make sure the battery is inserted correctly.
•Replace the battery with a new one.
•Make sure the TV power cord is plugged in.
•Make sure the path between the remote control and the
•Try operating the remote control at a closer distance to
PS or PT to switch to other TV programs.
OSD menu.
menu.
such that those settings are not available.
roads or sources of interference.
signal cable.
sensor is clear.
the TV.
34
Page 36
5
Specifications
Model No.: T281H
ItemSpecification
Display panelPanel Size28 inch TFT LCD
Screen Format16:10
Resolution1920 (H) x 1200 (V)
TV SystemATV: PAL, SECAM
DTV: DVB-T (w/o CI)
OSD
Languages
Audio SystemSCART1 IN / OUT R/L IN, R/L OUT
SCART2 INR/L IN
HDMIHDMI1, HDMI2
PC LINE InAUDIO IN jack (Green)
Audio OutEarphone jack (Pink)
Built-in Speaker5W x 2
Video SystemSCART1 IN/OUTRGB, AV, S-VIDEO
SCART2 INAV, S-VIDEO
HDMIHDMI 1, HDMI 2
Component
PCVGA
PowerPower
Consumption
Input VoltageAC Input: 100V~240V / 50Hz ~ 60Hz
EnvironmentOperating Temp.0 ºC ~ 40 ºC
Ambient40 ºC
PhysicalWeight10 Kg Max.
English, French, German, Italian,
Spanish, Portuguese, Dutch and Polish
YPBPR
Normal operation: 110W (Typical)
Standby mode: < 1W
English
35
Page 37
English
PC Support Timing
Mode
VGA640x480@60Hz31.559.925.2
SVGA800x600@60Hz37.860.340.0
XGA1024x768@60Hz48.460.065.0
SXGA1280x1024@60Hz64.060.0108.0
WXGA+1440x900@60Hz55.959.9106.5
WSXGA+1680x1050@60Hz65.360.0146.3
UXGA1600x1200@60Hz75.060.0162.0
WUXGA1920x1200@60Hz74.160.0154.0
Resolution
(active dot)
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Frequency
HDMI Support Timing
Input Video Resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Pixel
(MHz)
36
Page 38
6
( For reference only )
Dissembling the stand base
1Disconnect all the cables and cords from the TV to prevent breakage.
2Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3Squeeze the sides to release the retaining plastic tabs and pull the stand cover
off.
4Remove the six (6) screws so that the stand base can be removed.
5Gently remove the stand base.
Wall mounting the TV:
1Purchase a VESA compatible wall bracket:
VESA 100 X 200, 6 holes, M4, 8mm, 20 kg.
2Locate your ideal TV position on the wall.
3Fix the wall bracket firmly on the wall.
4Secure the TV to the bracket using the 6
mount holes on the back and center of the
TV.
Note:
•Please read the instructions of your specific wall bracket to properly wall mount
the TV.
•The pitch of the mounting holes is 100mm horizontally and 100mm vertically.
•The screws type required is metric: M4, 8 mm length.
•The 28" TV stand base can be screwed on a table or a hard surface using the
hole on the back of the stand base.
English
*Installing the LCD TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask
a qualified service personnel about using an optional bracket to mount the TV to the wall.
37
Page 39
English
7
Using the Cable Organizer
Route the cables through the calbe clamp as shown:
38
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.