HANNspree 19 Inch Screen TFT LCD Monitor User Manual

MAF-001001

Table of Contents

1

REGULATORY INFORMATION

RECYCLING INFORMATION

SAFETY NOTICE ........................................................................................... 5

PRECAUTIONS......................................................................................... 5

SPECIAL NOTES ON LCD MONITORS ................................................... 6

PREFACE

BEFORE YOU OPERATE THE MONITOR .................................................... 8

FEATURES................................................................................................ 8

CHECKING THE CONTENTS OF THE PACKAGE .................................. 8

POWER...................................................................................................... 9

CONTROLS AND CONNECTORS 10

......................................................................................................

...................................................................

.......................................................................

..........................................................

2

4

7

ADJUSTING THE VIEWING ANGLE ...................................................... 11

OPERATING INSTRUCTIONS..................................................................... 12

GENERAL INSTRUCTIONS.................................................................... 12

FRONT PANEL CONTROL ..................................................................... 13

HOW TO ADJUST A SETTING ............................................................... 14

PLUG AND PLAY .................................................................................... 18

TECHNICAL SUPPORT (FAQ).................................................................... 19

Q & A FOR GENERAL DEFECTS .......................................................... 19

ERROR MESSAGE & POSSIBLE SOLUTION ....................................... 20

APPENDIX ................................................................................................... 21

SPECIFICATIONS ................................................................................... 21

CONNECTOR PIN ASSIGNMENT .......................................................... 22

2

REGULATORY INFORMATION

Before operating the monitor, please read this manual thoroughly. This manual should be
retained for future reference.

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The devic
two conditions: (1) this device may not cause harmful interference; and (2) this device

must accept any interference received, including interference that may cause undesired
operations.

CANADA

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulation.

This device complies with requirement of EMC directive 89/336/EEC with regard to
Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard to Low Voltage
directive.

Socket-outlet shall be near the equipment and shall be accessible.

e complies with Part 15 of the FCC Rules.

Operation is subject to the following

3

TCO'03 ( TCO'03 applied model only )

Congratulations!

The display you have just purchased carries the TCO’03
Displays label. This means that your display is designed,
manufactured and tested according to some of the strictest
quality and environmental requirements in the world. This makes
for a high performance product, designed with the user in focus
that also minimizes the impact on our natural environment.

Some of the features of the TCO’03 Display requirements:

Ergonomics

Good visual ergonomics and image quality in order to improve the working environment
for the user and to reduce sight and strain problems. Important parameters are
luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

Energy-saving mode after a certain time – beneficial both for the user and the
environment
Electrical safety

Emissions

Electromagnetic fields
Noise emissions

Ecology

The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 001
Restrictions on

chlorinated and brominated flame retardants and polymers
heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in
cooperation with scientists, experts, users as well as manufacturers all over the world.
Since the end of the 1980s TCO has been involved in influencing the development of IT
equipment in a more user-friendly direction. Our labelling system started with displays in
1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcodevelopment.com

4

RECYCLING INFORMATION

HANNspree Inc. cares about environmental protection strategies and in using manufacturing

methods and treatments that lend themselves to conservation and recycling devices at the
end-of-life.
Our products, whenever possible, contain recyclable materials which can be recycled into new
devices. When necessary for operation, other materials may be classified as hazardous or
poisonous substances. We strongly encourage you to research the provided information
about recycling this device.

United State : http://newyork.earth911.org/

Asia : http://recycle.epa.gov.tw/public/public4_2.htm

Europe :

Ireland
Company : McGrath Environmental Consultants Ltd.
Contact Person : Ms. McGrath Clodagh

Address: 20 Lower John Street, Cork, Ireland.
Tel : [phone] Fax : [phone]

Norway :
Company : Bergfald & Co as Contact Person : Mr. Solevåg Øystein

Address : Solavågsvegen 90, EIDSNES, NORWAY ,Post Code : N-6037
Tel : [phone] Fax : [phone]
Web Site : http://www.bergfald.no/bergfald_english.html

United Kingdom :
Company : ARENA Network Contact Person : Dr. Tillotson Allen

Address : Bank Buildings Treforest Estate, Pontypridd, Rhondda Cynon Taff, Kindom Post
Code :
CF37 5UR
Tel : [phone] Fax : [phone]
Web Site : http://www.arenanetwork.org

5

SAFETY NOTICE

1. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modification to this equipment. It is the responsibilities of the user to
correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously
high voltages are present inside the monitor. Do not open the cabinet. For all service
issues, please refer to qualified personnel only.

PRECAUTIONS

Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry
tub, swimming pool or in a wet basement.
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can
injure a person and cause serious damage to the appliance. Use only a cart or stand
recommended by the manufacturer or sold with the monitor. If you mount the monitor on
a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit
instructions.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To
ensure reliable operation of the monitor and to protect it from overheating, be sure these
openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or
similar surface. Do not place the monitor near or over a radiator or heat register. Do not
place the monitor in a bookcase or cabinet unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated on the
label. If you are not sure of the type of power supplied to your home, consult your dealer
or local power company.
Unplug the unit during a lightening storm or when it will not be used for long period of
time. This will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire
and / or electric shock.
Never push any object into the slot on the monitor cabinet. It could short circuit parts
causing a fire or electric shock. Never spill liquids on the monitor.
Do not attempt to service the monitor by yourself; opening or removing covers can
expose you to dangerous voltages and other hazards. Please refer all service
issues to qualified service personnel.
To ensure satisfactory operation, use the monitor only with UL listed computers which
have appropriate configured receptacles marked between 100 - 240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

6

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn
off the Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop pattern
you use.
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of

0.01% or less such as a missing pixel or a pixel lit all of the time.
Due to the nature of LCD screens, an after image of the previous displayed content may
remain if this image has been the displayed for several hours. The LCD screen should
recover if the image is changed or powered off for several hours.

If the screen suddenly flashes erratically or the backlighting fails, please contact your
dealer or service center for repair. Do not attempt to repair the monitor yourself.

7

PREFACE

Thank you for purchasing a Hannspree Liquid Crystal Display Monitor (LCD Monitor).

Please carefully read this manual in its entirety before setting up, using or operating
your Monitor. To ensure the safe and correct installation and operations of the Monitor,
it is important that the safety and operation instructions in this manual are followed.

This instruction manual is designed to assist you in setting up and using the Monitor.
The information in this manual has been carefully checked for accuracy; however, no
guarantee is given to the correctness of the contents. The information in this manual is
subject to change without notice.

To the extent allowed by applicable law, Hannspree, Inc. (
liable for direct, indirect, special, exemplary, incidental or consequential damages
arising from any defect or omission in this manual, even if advised of the possibility
of such damages in advance.

“Hannspree”) shall not be