S_ST551 ST558_UM_EU_V01_H
1506-0B86000
138,7cm (54.6”)
Liquid Crystal Display Television
Flüssigkristallbildschirm
Téléviseur à Écran à Cristaux Liquides
TV de Pantalla de Cristal Líquido
TV LCD
TV Ecrã de Cristais Líquidos
ЖКД ТВ
LCD-tv
Telewizor ciekłokrystaliczny
LCD TV
LCD TV
LCD TV
LCD TV
Folyadékkristályos TV
РК-телевізор
Televizoru LDC
LCD телевизор
TV cu LCD
LCD TV
Televizora s ekranom od tekućih kristala
Table of Contents
Regulatory Information ................................................................ 3
Description of Warning Symbols .................................................. 3
Safety Notices............................................................................. 4
Preface ....................................................................................... 6
Warranty and Service .................................................................. 6
1. Getting Started ........................................................................8
1.1 Package Contents .............................................................8
1.2 Introducing the TV .............................................................9
1.3 Features ...........................................................................9
1.4 Control Panel ..................................................................10
1.5 Input and Output Jacks .................................................... 10
1.6 Remote Control ...............................................................12
1.7 Inserting the Remote Control Batteries .............................16
2. Setting up your TV .................................................................18
2.1 Basic Connections...........................................................18
2.1.1 Power Connection ..................................................18
2.1.2 Connecting an Antenna or Cable TV........................ 18
2.2 Connecting External Devices ...........................................19
2.2.1 Connecting External Earphones .............................. 19
2.2.2 Connecting to AV Devices.......................................20
2.2.3 Connecting a VCR/ STB/ DVD Player
Using Component Video/Audio,
Composite Video/Audio, or S-Video/Audio ........21
2.2.4 Connecting a PC using VGA ...................................22
2.2.5 Connecting a PC using DVI.....................................22
2.2.6 Connecting HDMI ...................................................23
2.2.7 Connecting USB ..................................................... 23
2.2.8 Connecting a VCR/ STB/ DVD Player using SCART . 24
2.3 Using the TV ...................................................................25
2.3.1 Turning the TV On and Off ...................................... 25
2.3.2 Switching Source Signals........................................ 25
2.3.3 Performing an Automatic Channel Search................ 25
2.3.4 Selecting Channels.................................................25
2.3.5 Adjusting the Volume..............................................25
3. Adjusting On-Screen Display (OSD) Settings ..........................26
3.1 OSD Setting Menus .........................................................27
English
1
English
Table of Contents
3.2 Adjusting Picture Settings................................................27
3.3 Adjusting Sound Settings ................................................. 28
3.4 Adjusting Channel Settings for ATV (Analogue TV) ........... 28
3.5 Adjusting DTV Settings ....................................................30
3.6 Adjusting PC Settings ......................................................33
3.7 Adjusting Setup Settings .................................................34
4. Troubleshooting .....................................................................36
5. Support Timing ......................................................................37
6. Specifications ........................................................................38
7. Dissembling the stand base....................................................39
8. Using the Cable Organizer .....................................................40
2
Regulatory Information
CE Conformity Statement
This device is in conformity with the requirements of EU Council Directive
2004/108/EC on the approximation of the laws of the Member States relating to
electromagnetic compatibility and Directive 2006/95/EC on the harmonization of
the laws of Member States relating to electrical equipment for use within certain
voltage limits. Hannspree cannot accept responsibility for any failure to satisfy
the requirements resulting from a non-recommended modification of the device.
Description of Warning Symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
CAUTION
English
This symbol is used to alert users
to pay attention to important
descriptions regarding usage,
maintenance (repair), and
additional important information
related to this TV.
This symbol is used to alert users
to the risk of electric shocks due
to dangerous and uninsulated
components.
3
English
Safety Notices
Installation Safety Notes
Location
Avoid allowing the TV to get prolonged exposure to sunlight or other strong
sources of heat. Leave sufficient distance between the TV and the wall to
provide enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Notes:
• The LCD TV is for entertainment use only and visual display
tasks are excluded.
• This device uses a VGA connector to connect to a PC. To reduce
the influence of main frequency on the source signal, use a VGA
monitor cable with ferrite shield.
4
Personal Safety
1. To avoid overloading the power supply, never plug too many electrical
devices into an outlet, power strip, or extension cable.
2. Dangerous high-voltage electric power components are located inside the
TV. To avoid electric shock, do not disassemble the casing.
3. Do not place or drop metals, small objects, or flammable materials into
the vent of the TV.
4. If the TV is dropped, falls down, or is otherwise damaged, unplug the
power cord immediately and contact an authorized service technician.
5. If any fluid is sprayed or dropped into the TV, contact an authorized
service technician.
6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the
screen is broken, do not touch the broken glass.
7. Do not allow children to use the TV unattended.
8. Be careful when disconnecting the power plug. Hold the plug. Do not
attempt to disconnect the plug by pulling on the power cord.
Installation
1. Do not place the TV in locations where there is excessive steam or dust.
2. Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet,
or in a sealed cabinet.
3. Install the outdoor antenna away from power transmission lines to avoid
possible danger.
English
5
English
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD
TV). Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or
operating your TV. To ensure the safe and correct installation and operations of
the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV.
The information in this manual has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not
be liable for direct, indirect, special, exemplary, incidental or consequential
damages arising from any defect or omission in this manual, even if advised of
the possibility of such damages in advance.
Warranty and Service
For complete warranty service information, please refer to the “Warranty Card”
enclosed with your TV.
6
Copyright
© Copyright 2010 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and distributed under
licenses restricting its use, copying and distribution. No part of this manual may
be reproduced in any form by any means without the prior written authorization
of Hannspree. The TV described in this manual may include copyrighted
software of Hannspree (or other third parties). Hannspree (or other third parties)
preserves the exclusive rights for copyrighted software, such as the right to
distribute or reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the product
described herein shall not be distributed, modified, reverse engineered, or
reproduced in any manner without the prior written authorization of Hannspree
(or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other
product names, trademarks or logos mentioned herein are used for identification
purpose only, and may be the trademarks or registered trademarks of their
respective owners.
The purchase of the product described herein shall not be deemed to grant,
either directly or by implication, estoppel or otherwise, any license under the
copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a
product.
English
Trademark Notice
Hannspree products incorporate High-Definition Multimedia
Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
7
English
1
Getting Started
1.1 Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or damaged.
•TV
• User’s manual
• Quick start guide
• Warranty card
• Power cord
• Remote control and batteries
• TV cleaning cloth
• Rubber cover
According to WEEE regulation, this TV can’t be handled as normal
trash in Europe when it is out of usage. Please refer to the recycle
information from our website to handle it.
As an ENERGY STAR
meets the ENERGY STAR® guidelines for energy efficiency.
®
Partner, Hannspree has determined that this product
8
1.2 Introducing the TV
You can watch SECAM/ PAL/ DVB-T broadcast, cable, or digital television channels,
and easily connect a VCR, STB or DVD player to the SCART, HDTV (
AV(Composite), and HDMI input ports (locations of these ports depend on the
model). You can also use the TV as a monitor for your PC by connecting it through
the VGA port.
Convenient control buttons located on the TV and a handy remote control let you
change channels, adjust the volume, and change display settings through an easyto-use on-screen display menu system. The built-in stereo speakers provide full rich
sound and a convenient audio output port lets you connect to an external audio
system or earphones.
Component),
1.3 Features
• TV Tuner: Built-in TV Tuner
• Audio/ Video support:
– SCART inputs
– VGA (PC) input
– HDMI inputs
– HDTV (Component) input
– R/L audio inputs
–PC Audio In
– 3.5 mm stereo earphone
output
• Teletext (TV RF+SCART) 1.5v.
with 500 pages memory
• Built-in stereo speakers
• Image Enhancement Technology
– 3:2/2:2 pull down
– 3D Comb Filter
– HD-ready TV
• Noise Reduction
• Advanced 3D de-interlacing
• Edge Enhancement
– AV(Composite) input
– S-Video
• On-Screen Display (OSD) menu
English
Note:
• The supporting devices mentioned in this manual may vary on different models.
For more information, please refer to the manufacturer’s user manual or the
Quick Start Guide of your TV model.
9
English
1.4 Control Panel
Description Button Function
Power Press to turn the TV on or off.
Input source INPUT Press to select the proper input source.
Menu MENU Press to open the OSD menu.
Press to increase the program number or
Program select
Program select
P
P
move upward to the previous item on the
OSD menu.
Press to decrease the program number or
move downward to the next item on the OSD
menu.
Volume adjust VOL +
Volume adjust VOL -
Remote IR
sensor
Power/Standby
indicator
Speakers Deliver high-quality sounds.
Press to increase the volume or move to the
right on the OSD menu.
Press to decrease the volume or move to the
left on the OSD menu.
Receive incoming remote control commands.
Indicate power (green) or standby (red)
status.
1.5 Input and Output Jacks
Description Connector Function
CI Connect to a CI device.
CI
10
Description Connector Function
English
Service Service only. Not available for users.
S-Video Input
Composite Input
(Video)
Composite Inputs
(Audio)
Earphone Output
SERVICE
S-VIDEO
VIDEO
R-AUDIO-L
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to earphones or external
speakers with a built-in amplifier.
Cable/Antenna Connect to an antenna or cable TV.
Component
Inputs (Video)
Component
Inputs (Audio)
P
R
P
B
R
Connect to an external device, such as a
Y
VCR, STB, or a DVD player.
Connect to an external device, such as a
L
VCR, STB, or a DVD player.
SCART 1 IN/OUT
SCART 2 IN
Connect to an external device, such as a
SCART 1
VCR, STB, or a DVD player with AV, SVideo, RGB, L/R IN, Analog TV Out, and
L/R Out.
Connect to an external device, such as a
SCART 2
VCR, STB, or a DVD player with AV, SVideo, L/R IN.
11
English
A
Description Connector Function
VGA (PC) Input Connect to a PC’s VGA port.
PC Audio Input Connect to a PC’s line/audio port.
HDMI 1 Input
VGA
UDIO IN
HDMI IN
1
Connect a HDMI equipment or a HDMIDVI adapter cable to devices such as a
DVD player or set-top box.
Connect a HDMI equipment or a HDMIDVI adapter cable to devices such as a
HDMI 2 Input
HDMI IN
2
DVD player or set-top box.
Connect a HDMI equipment or a HDMIDVI adapter cable to devices such as a
HDMI 3 Input
HDMI IN
3
DVD player or set-top box.
Connect a HDMI equipment or a HDMIDVI adapter cable to devices such as a
HDMI 4 Input
HDMI 4
DVD player or set-top box.
Power Connector Connect to the included power cord.
1.6 Remote Control
Description Icon Function
Power Press to turn the TV on or off.
Input Signal
Typ e
12
INPUT
Press to select the input signal types: TV, DTV,
AV, S-Video, YPbPr, PC, HDMI 1, HDMI 2,
HDMI 3, HDMI 4, SCART 1, or SCART 2.
Description Icon Function
V
Use to select a program directly. Press 0-9 to
Keypad
enter the program numbers (press 1 and 0 for
program 10).
English
Pro.List Pro.LIST
Last Press to return to the last channel selected.
Information INFO
Menu MENU
OK OK Press to confirm a selection.
Arrows
Electronic
Program
Guide
Teletext mode TEXT
LAST
EPG
Press to display the features contained (only
for DTV).
1. Press to display current channel/program
information.
2. During DTV menu selection, press to display
help information about Channel Organizer,
Channel Sorting, Channel Grouping, Time and
Parental Rating.
Press to turn the on-screen display (OSD)
menu on/off.
Press up, down, left or right to scroll through
the on-screen display menus.
Press to display detailed programming
information for channels (only for DTV).
Press to activate the teletext mode.
Volume
adjustment
Mute
OL / VOL
MUTE
Press VOL
Press VOL
Press to eliminate the sound. Press it again or
press the volume adjustment buttons to restore
the sound.
+ to increase audio volume.
- to decrease audio volume.
13
English
X
Description Icon Function
Dual sound
Select
program
Red, Green,
Yellow, Blue
Index
Mix
Adjust size
Subtitle
Hold
P /
P
INDE
MIX
SIZE
SUBTITLE
HOLD
Press to change the multi sound selection of
the TV channel.
Press PS to increase the program number.
Press PT to decrease the program number.
Press the colored buttons to perform specific
tasks in the OSD menu or teletext mode.
Press to display a table of the available teletext
subjects (programmable in the teletext mode
only).
Press to display the teletext over the program
on the screen (programmable in the teletext
mode only).
Press to adjust the screen size (programmable
in the teletext mode only).
With an ATV source, if the teletext mode is
activated and the teletext has a subtitle page,
press to display the page.
With a DTV source, press to display the subtitle
OSD, and select the language.
Press to inactivate automatic page change
which only occurs when more than one teletext
page exists.
(Programmable in the teletext mode only)
Reveal
Sound Mode
14
REVEAL
SOUND
Press to display the hidden information, such
as solutions to puzzles. (Programmable in the
teletext mode only)
Press continuously to toggle through all the
sound settings: Standard, Music, Movie,
Speech, or User.
Description Icon Function
English
Picture Mode
Favorite
channel
Freeze
Sleep timer
Aspect ratio
Note:
• For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at TV.
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and ensure
that there are no obstacles between them.
PIC
FAV.
FREEZE
SLEEP
ASPECT
Press continuously to toggle through all the
picture settings: Vivid, Soft, User, Standard.
In ATV, press to select favorite channels and
press
In DTV, press to open favorite list menu and
press / to select channels and press
OK to go to favorite channels.
Press to pause a video frame on-screen.
(Programmable in the ATV source only)
Press repeatedly to set the sleep timer (15, 30,
45, 60, 90 or 120 minutes).
Cancel the timer by selecting the Sleep Off
option.
Press to adjust the width-to-height ratio of the
image with aspect ratio: AUTO, Full, Normal,
Panorama, Zoom, Subtitle.
/
to go to favorite channels.
15
English
1.7 Inserting the Remote Control Batteries
1
Open the battery compartment cover at the back of the remote control.
PRESS
2 Insert the batteries paying attention to the polarity markings inside the
battery compartment.
3 Replace the battery compartment cover.
PRESS
16
CAUTION
• If the remote control is not used for a long period, remove the
batteries and store them properly.
• Handle damaged or leaking batteries carefully, and wash hands with
soap if they come in contact with leaked chemical fluids.
• If your remote control has two batteries, do not mix new and old
batteries, or the life of the new batteries will be shortened. Chemical
fluids may leak from the old batteries.
• Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
• Refer to your local recycling or waste disposal rules and contact a
local waste disposal vendor to dispose of used batteries.
• The remote control cover may have a magnet in it, so do not place
magnetic sensitive items such as watches, credit cards, or flash
media close to the cover.
• Do not use force when pulling the remote control cover open; you
may damage the hinge.
English
17
English
2
Setting up your TV
2.1 Basic Connections
2.1.1 Power Connection
1
Connect the power cord to the AC IN input jack on the rear of the TV.
2 Insert the plug at the other end of the power cord into a
2.1.2 Connecting an Antenna or Cable TV
Connect one end of the VHF/UHF (Antenna) or CATV cable to TV/DTV jack on the
rear of the TV.
Antenna
power outlet
.
Ground Clamp
Coaxial Cable
Note:
• Images are for illustration only and may vary by model or region.
• If you cannot receive channels after connecting to an antenna or cable TV line,
try scanning for channels.
Ground
18
2.2 Connecting External Devices
Connect external devices such as VCRs, STBs, DVD players, video game consoles,
earphones, or a PC to the TV using the appropriate ports on the rear of the TV.
2.2.1 Connecting External Earphones
Headphones
Speakers
(Built-in Amplifiers)
Note:
• External speakers or headphones are not included with the TV.
• The internal TV speakers will not output sound when headphones are
plugged in.
• Use external speakers with built-in amplifiers only.
• Only one external device for sound can be connected at a time.
English
19
English
2.2.2 Connecting to AV Devices
The following diagram illustrates how to connect the AV devices to your TV via HDMI
(A), YPbPr/AUDIO (B), SCART (C), AV/SV (D) ports.
A
HDMI IN
HDMI Cable
(Optional)
B
or
Audio
Cable
(
Optional)
AUDIO VIDEO
PRP
RL Y
B
Video
Cable
(Optional)
Audio/Video
Cable
or or
SCART
Adapter
(Optional)
R-AUDIO-L/M
O
NO
VIDEO
S.VIDEO
HDMI 4
31 2
(Optional)
S-VIDEO
LR
YLRHDMI PRP
B
VIDEO
SCART 1
SCART
C
SCART 2
SCART Cable
(Optional)
Audio/Video
Cable
(Optional)
RL
VIDEO
D
S-VIDEOR-AUDIO-L VIDEO
S-VIDEO
Video Game
or
Console
VCR
STB
DVD
Note:
• Please connect the audio ports shown in YPbPr/AUDIO (B) to audio ports
of Component/YPbPr group in your AV device. AV/SV (D) ports should
connect AV/SV ones. Only a set of the audio ports can be selected when
connecting AV devices.
• The Video and S-Video ports in group (D) share the same R/L Audio ports
in the same group.
20
2.2.3 Connecting a VCR/ STB/ DVD Player
Using Component Video/Audio,
Composite Video/Audio, or S-Video/Audio
Connect the TV to a VCR/ STB/ DVD player using three different types of
video/audio inputs.
English
VCR
STB
DVD
VCR
STB
DVD
VCR
STB
DVD
Audio Cable
(Optional)
Audio Cable
(Optional)
Video Cable
(Optional)
Audio Cable
(Optional)
R-AUDIO-L VIDEO
R-AUDIO-L
S-VIDEO
S-Video Cable
VIDEO
Y
P
B
P
R
AUDIO
L
R
Video Cable
(Optional)
(Optional)
21
English
2.2.4 Connecting a PC using VGA
Connect the TV to your PC to use it as the monitor using the VGA port as shown.
1
Connect the VGA port of the TV to the VGA output of the PC.
2 Connect the line out port of the PC to the PC Audio In port of your TV to
listen to audio from the PC.
AUDIO IN
VGA
VGA Cable
PC
(Optional)
Audio Cable
(Optional)
2.2.5 Connecting a PC using DVI
Connect the TV to your PC to use it as the monitor using the DVI port as shown.
1
Connect the HDMI port of the TV to the DVI output of the PC.
2 Connect the line out port of the PC to the PC Audio In port of your TV to
listen to audio from the PC.
HDMI IN
1 HDMI 43
2
HDMI to DVI Cable
(Optional)
AUDIO IN
Audio Cable
(Optional)
PC
I
M
D
H
22
2.2.6 Connecting HDMI
HDMI (High Definition Multimedia Interface) assures that the best video signal is
always sent from source to the TV. Refer to the following illustration to connect a
HDMI device to the TV.
HDMI IN
1 HDMI 43
2
English
HDMI Cable
DVD Player
(Optional)
Note:
When the HDMI cable is connected, connecting the audio cable is not necessary.
However, it is necessary to do so if a HDMI to DVI cable is connected.
2.2.7 Connecting USB
Service port, for DTV F/W update only.
SERVICE
USB Drive
(Optional)
23
English
2.2.8 Connecting a VCR/ STB/ DVD Player using SCART
Use the SCART ports to connect a TV, VCR, VCD, DVD player or video game
console. You can choose to use a SCART cable or adapter for the connection
depending on the ports available on your player.
SCART 1 SCART 2
SCART Adapter
(Optional)
R-AUDIO-L/MONO
VIDEO
S.VIDEO
SCART Cable
(Optional)
Connect to
AV connectors
Connect to
S-Video connectors
Note:
• The S-Video connector and AV connectors cannot be connected at the
same time, or the wrong signals might be generated.
• The cables are color-coded (black, red, white, and yellow). Connect each
color-coded cable to the appropriate connector on your device.
24
2.3 Using the TV
2.3.1 Turning the TV On and Off
1
Press on the control panel or remote control. The power LED indicator on
the TV changes from red to green, indicating that the TV is on.
2
Press again. The power LED changes from green to red, indicating that
the TV is off
.
2.3.2 Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal.
2.3.3 Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1
Press
MENU
on the control panel or remote control, then select to enter the
Channel menu.
2
Select Auto Search.
3 Press on the remote control to run the channel search.
2.3.4 Selecting Channels
•Press PS on the remote control or control panel to increase the channel
number.
•Press PT on the remote control or control panel to decrease the channel
number.
• Enter the specific channel number by pressing the number buttons on the
remote control.
English
2.3.5 Adjusting the Volume
1
Press
VOL+
on the control panel or
2 Press VOL- on the control panel or remote control to decrease the volume.
3 Press MUTE to eliminate sounds, and press MUTE again or press the
volume buttons to restore the original volume.
remote control
to increase the volume.
25
English
3 Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple method to
adjust the TV settings. The OSD menu can be accessed conveniently through the
buttons on the remote control.
Before going into details of each OSD option, you may get acquainted with the
placement of the OSD system:
CURRENT MENU:
Displays the title of the
currently selected menu.
MAIN MENU:
Displays a list
of menu items.
The selected
item is
highlighted by
a darker blue
color than
others.
Setup
Language
TT Language
SCART 1
SCART 2
HDMI Scan Info
Aspect
HDMI Audio
X-Contrast
Move
Select Return
ADJUSTABLE Options:
Displays the setting/value
of the adjustable options.
English
West
AUTO
AUTO
AUTO
Full
HDMI
Off
Menu
INSTRUCTIONS:
Quick instructions for
adjusting the settings.
Function TV Control Panel Remote Control
OSD Menu MENU
Up PS
Down PT
Select/ Increase
Select/ Decrease
VOL
VOL
Return MENU
+
–
MENU
Arrow
Arrow
Arrow
Arrow
MENU
26
3.1 OSD Setting Menus
Follow the instructions indicated on the down side of the OSD Function Menu. Press
P
S/PTon the control panel or /
to scroll through the menus, VOL + on the
control panel or to select an item, or MENU to exit the OSD menu.
The following menus can be set by different adjustment methods.
3.2 Adjusting Picture Settings
English
1 Press MENU to enter the OSD Main Menu
screen. The Picture menu is then
displayed.
2 Press to enter the Picture menu.
3 Press
4 Press
options settings.
/
to select an item.
/
to adjust the scales or
Move
Picture
Picture Mode
Brightness
Contrast
Sharpness
Colour
Hue
Backlight
Colour Temp
Standard
2
Standard
Select Return
Menu
50
50
3
45
50
1
5 Press MENU to return to the Picture menu.
6 Press MENU to exit the OSD menu.
- The Picture menu can be used to adjust the Picture Mode, Brightness, Contrast,
Sharpness, Colour, Hue, Backlight, and Colour Temp settings.
•The Picture Mode can be set to Standard, Vivid, Soft, or User. Please note that
all customized picture settings will be saved as the User mode. You could also
use other modes to get a quick setting switch for different needs.
•The Brightness, Contrast, Colour, and Hue (NTSC only) can be adjusted by
/
pressing
• Press
•The Backlight helps to manually turn down the backlight in dark scenes,
generating a deeper black color. Press
•The Colour Temp allows you to set the colour temperature. You can choose your
favourite from three different modes: Standard, Warm, and Cool.
Note: The options available on the OSD menu may vary depending on the input
signal source.
to move the scales from 0-100.
/
to adjust the scales from 0-9 for Sharpness.
/
to adjust the scales from 1-10.
27
English
3.3 Adjusting Sound Settings
1 Press MENU to enter the OSD Main
Menu screen.
2 Press to select the Sound menu.
3 Press to enter the Sound menu.
4 Press
5 Press
settings.
/
to select an item.
/
adjust the scales or options
Move
Sound
Sound Mode
Balance
Treble
Bass
Standard
Select Return
Menu
6 Press MENU to return to the Sound menu.
7 Press MENU to exit the OSD menu.
- The Sound menu can be used to adjust the Sound Mode, Balance, Treble, and Bass
settings.
•The Sound Mode can be set to Standard, Music, Movie, Speech, or User.
/
• The Balance can be adjusted by pressing
to move the scales from -50 to
50.
/
•The Treble and Bass can be adjusted by pressing
to move the scales from
0-100.
Note: The options available on the OSD menu may vary depending on the input
signal source.
3.4 Adjusting Channel Settings for ATV (Analogue TV)
1 Press MENU to enter the OSD Main Menu
screen.
2 Press to select the Channel menu.
3 Press to enter the Channel menu.
4 Press
5 Press
settings.
/
to select an item.
/
adjust the scales or options
Move
Channel
Area
Channel
Colour System
Sound System
Auto Search
Manual Search
Fine Tune
AFC Lock
UK
15
AUTO
AUTO
241.25 MHz
Off
Select Return
Menu
0
50
50
6 Press MENU to return to the Channel menu.
7 Press MENU to exit the OSD menu.
- The Channel menu can be used to adjust the Area, Channel, Colour System, Sound
System, Auto Search, Manual Search, Fine Tune, AFC Lock, Channel Edit and
Parental Lock settings.
28
•The Area can be set to Germany, UK, Italy, Spain, Portugal, France, Hungary,
Poland, Netherlands, and Other.
/
•The Channel can be used to select channels by pressing
.
• There are a variety of transmission standards of colour and audio signals used in
worldwide TV systems. The Colour System and Sound System settings allow
you to select standards suited for the area where you reside.
•The Colour System can be set to AUTO, PAL , and SECAM.
•The Sound System can be set to AUTO, BG, DK, I, L, and L’.
• Please note that not all combinations of colour and sound systems are available.
The setting of one system may then change automatically because of the setting
of the other.
• Select Auto Search to activate the automatic TV channel search. Select Manual
Search to scan the TV channels manually.
Auto Search
Channel
1
Manual Search
Channel
1
English
63.55 MHz
Menu
Exit
144.95 MHz
Menu
Exit
•The Fine Tune allows you to make minor frequency alternation to improve the
/
quality of signals. Press
to adjust the channel frequency.
• To lock on a frequency and let the TV automatically fine-tune it, you can select On
under the AFC Lock option. According to you preference, it can be set to On or
Off.
•The Channel Edit enables you to further manage your channel list:
29
English
- Just follow the instructions at the bottom of the Channel Editor screen to Skip,
Delete, Swap, or Lock a channel.
1
2
3
4
5
6
7
8
9
10
Channel Editor
223.25
223.25
235.30
241.30
259.25
271.25
277.25
283.25
289.30
301.30
Del LockSwapSkip
Rename ReturnFav.Move
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
Fav. LockSkipNameFrequencyChannel
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Fav. Menu
Channel Editor
0 987654321
a jihgfedcb
k tsrqponml
u /\?@zyxwv
Save Caps Del
Ok Menu
ReturnEnterMove
- The functions of naming (Name) and marking a channel as a favourite (Fav.) are
also available. To change the channel name, select the channel and press
open the Channel Editor. Input the channel name you prefer using the on screen
keys and select Save.
- You may need to enter your Parental Lock password to unblock a channel if you
blocked it before.
•The Parental Lock allows you to block channels whose programmes are not
appropriate for children of certain ages. Set your 4-digit password after entering
the Parental Lock screen.
Note:
• Before changing any settings under the Channel menu, please make sure
that you’ve already changed the input signal type to (analogue) TV; the
Channel memu may vary depending on the selected input signal type.
• Some Channel Settings are only available in (analogue) TV mode.
• The original password is set to 0000 by default.
~][}{
!)(><
^%$#|
-*&+=
,";:_
/
to
3.5 Adjusting DTV Settings
1 Press MENU to enter the OSD Main
Menu screen.
2 Press to select the DTV menu.
3 Press to enter the DTV menu.
4 Press
5 Press
/
to select an item.
/
to change scales or settings.
6 Press MENU to return to the DTV menu.
7 Press MENU to exit the OSD menu.
30
DTV
Channel Management
Area
Auto Search
Manual Search
Preferred Audio
Preferred Subtitle
Parental Lock
Subtitle Type
Move
UK
English
English
Normal
Select Return
Menu
- The DTV menu can be used to adjust the Channel Management, Area, Auto Search,
Manual Search, Preferred Audio, Preferred Subtitle, Parental Lock, Subtitle Type,
Time, CI and Parental Rating.
• Under the submenu of the Channel Management option, you can organize, sort,
group, or delete TV channels.
•The Area can be set to Germany, UK, Italy, Spain, Portugal, France, Hungary,
Poland, Netherlands and Other.
• Select Auto Search to activate the automatic TV and Radio channel search.
Select Manual Search to look for the TV channels manually.
S.No TV Channel S.No Radio Channel
Channel
Progress 28%
Menu
Cannel Search
35 UHF 586000KHz/8M
Exit
Select
Manual Search
Channel Name
Frequency(KHz)
Bandwidth
21
474000
8M
48%Signal
Menu
Return
0%Quality
•The Preferred Audio language can be set to English, France, Germany, Italy,
Spain, Portugal, Denmark, and Czech.
• Similarly, you can change your Preferred Subtitle language to English, France,
Germany, Italy, Spain, Portugal, Denmark,Czech, or set it to Off.
• The Channel Organizer supports channel swap function. To select one channel that
you prefer to exchange, press the Yellow button on the remote control, then press the
numeric button on the remote control to input the channel that you want to exchange
with, finally press the OK button on the remote control to complete.
•The Parental Lock allows you to change the password.
Parental Lock
Enter Old Password
Enter New Password
Confirm New Password
English
Menu
0 9
CancelPress 0 to 9
Note:
• The original password is set to 0000 by default.
• Some channel Settings are only available in DTV mode.
31
English
•The Subtitle Type provides you with Normal and Hearing Impaired options.
•The Time selection includes GMT Offset and Summer Time.
- Press
- Press
/
to adjust the GMT Offset to AUTO or a value ranging from +12 to -12.
/
to adjust Summer Time to On or Off.
Time
GMT Offset
Summer Time
AUTO
Off
Move
Select Return
Menu
• Select CI to access the Common Interface.
DTV
Time
CI
Parental Rating
Move
Select Return
Menu
- Press to enter the Common Interface menu.
•The Parental Rating allows you to select the parental rating.
System Setup
Parental Rating
Select
Off
Menu
Return
- Press the keypad on the remote control to enter the password.
- Press
/
to adjust the Parental Rating from 4 to 18 or Off.
32
3.6 Adjusting PC Settings
1 Press INPUT and select PC as the signal
type.
2 Press MENU to enter the OSD Main
Menu screen.
3 Press to select the PC menu.
4 Press to enter the PC menu.
5 Press
6 Press
settings.
/
to select an item.
/
adjust the scales or options
7 Press MENU to return to the PC menu.
8 Press MENU to exit the OSD menu the OSD menu.
- The PC menu can be used to adjust the Auto Adjust, H Position, V Position, Phase
and Clock settings.
• You can apply the automatic adjustment by setting Auto Adjust at On.
• The scales for H Position and V Position range from -16 to 16.
• The scales for Phase and Clock range separately from 0 to 31, and from -50 to
50.
Move
Pc Setup
Auto Adjust
H Position
V Position
Phase
Clock
Off
Select Return
English
0
0
0
0
Menu
33
English
3.7 Adjusting Setup Settings
1 Press MENU to enter the OSD Main
Menu screen.
2 Press to select the Setup menu.
3 Press to enter the Setup menu.
4 Press
5 Press
options settings.
/
to select an item.
/
to change the scales or
Move
Setup
Language
TT Language
SCART 1
SCART 2
HDMI Scan Info
Aspect
HDMI Audio
X-Contrast
English
West
AUTO
AUTO
AUTO
Full
HDMI
Off
Select Return
6 Press MENU to return to the Setup menu.
7 Press MENU to exit the OSD menu.
- The Setup menu can be used to adjust the Language, TT Language, SCART1,
SCART2, HDMI Scan Info, Aspect, HDMI Audio, X-Contrast, OSD Time, Reset,
Background, Initial Setup,
• The available languages are English, Italiano, Español, Português, Français,
Deutsch, Magyar, Polski, and Nederlands.
• The available TT Language options are West, East, Hungary, Arbic, and Farsi.
•The SCART1 selections include AUTO, CVBS, RGB, and S-VIDEO.
•The SCART2 selections include AUTO, CVBS, and S-VIDEO.
• The available options in HDMI Scan Info are AUTO, Overscan, Underscan
(available only when HDMI is connected).
•The Aspect offers you AUTO, Full, Normal, Panorama, Zoom, and Subtitle
options.
• The available HDMI Audio selections include HDMI and Analog In (available only
when HDMI is connected).
•The X-Contrast can be set to On or Off.
• OSD Time can be set to 10 Secs, 20 Secs, 30 Secs, and 60 Secs.
• Select
Reset setting to reset settings to the defaults.
•The Background can be set to Blue or Off.
• Select Initial Setup to do auto Channel Scan.
•The Hannspree Light can be set to Low, Middle, High, and Off.
•The Vivid Motion can be set to Low, Middle, High, and Off.
Hannspree Light, and Vivid Motion settings.
Menu
34
•The Aspect mode selections include AUTO, Full, Normal, Subtitle, Zoom, and
Panorama. The following pictures are settings for HDMI/1080P, please see below
for details.
Type 4:3 16:9
Content
AUTO
Full
Nomal
Subtitle
English
Zoom
Panorama
Note: The options available on the OSD menu may vary depending on the input
signal source.
35
English
4
Troubleshooting
Situation Solution
• Connect the power cord properly.
• Check if the power LED is on or not.
No picture and sound.
No picture, or poor picture,
sound is OK.
Picture is not in color.
Picture is OK, no sound.
One of the speakers has no
sound.
Cannot receive some TV
channels using cable TV.
Want to reset TV settings. • Use the Reset function in the Setup OSD menu.
Cannot operate menus.
Screen image turns over. • Make sure the video signal cable is connected properly.
Snow appears on the screen.
Blurred or overlapped
images.
Remote control doesn’t work.
• Press on the control panel or remote control.
• Press Input to cycle through connected video sources.
•Press
• Make sure all cables are connected properly.
• Check the antenna and cable connections.
• Adjust the Brightness in the Picture OSD menu.
• Adjust the Colour option in the Picture OSD menu.
• Make sure the source device is functioning properly.
• Make sure the audio cable is connected securely.
• Turn the mute off.
•Press VOL + on the control panel or remote control.
• Adjust the Balance in the Sound OSD menu.
• Try the Auto Search function in the Channel (ATV mode)
• If OSD items are colored in gray, the system is in a state
• Adjust the location of the antenna, placing it far from
• Check the antenna and the video signal line connections.
• Adjust the Sharpness setting.
• Choose programs with high quality signals.
• Adjust the direction of the antenna or replace the video
• Make sure the battery is inserted correctly.
• Replace the battery with a new one.
• Make sure the TV power cord is plugged in.
• Make sure the path between the remote control and the
• Try operating the remote control at a closer distance to
PS or PT to switch to other TV programs.
or DTV (DTV mode) OSD menu.
such that those settings are not available.
roads or sources of interference.
signal cable.
sensor is clear.
the TV.
36
5
Support Timing
PC Mode Support Timing
Mode Resolution
VGA
SVGA 800x600@60Hz 37.879 60.317 40.0 V V
XGA 1024x768@60Hz 48.363 60.004 65.000 V V
VESA 1280x720@60Hz 44.955 59.94 74.17 6 V
VESA 1280x960@60Hz 60.000 60.000 108.000 V
SXGA 1280x1024@60Hz 63.981 60.020 108.000 V V
WXGA+ 1440x900@60Hz 55.935 59.887 106.500 V V
WSXGA+ 1680x1050@60Hz 65.29 59.95 146.25 V
VESA 1920x1080@60Hz 66.587 59.93 138.500 V V
(active dot)
640x480@60Hz
Video Mode Support Timing
Resolution (active dot) HDMI HDTV (Component)
640x480p@60Hz V
720x480i@60Hz V V
720x480p@60Hz V V
720x576i@50Hz V V
720x576p@50Hz V V
1280x720p@60Hz V V
1280x720p@50Hz V V
1920x1080i@50Hz V V
1920x1080i@60Hz V V
1920x1080P@24HZ V V
1920x1080P@25HZ V V
1920x1080P@30HZ V V
1920x1080P@50Hz V V
1920x1080P@60Hz V V
Horizontal
Frequency
(KHz)
31.469 59.940 25.175 V V
Ver tica l
Frequency
(Hz)
Nominal
Pixel Clock
(MHz)
PC (VGA) DVI to HDMI
English
37
English
6
Specifications
Screen Size 138,7 cm / 55”
LCD Panel 1920x1080
Refresh Rate 100Hz
Input Function RF in x 1
SCART x 2
AV x 1
Component Video RCA In x 1
Component Audio In x 1
HDMI x 4
VGA x 1
VGA Audio In x 1
CI x 1
S-Video x 1
Output Function Earphone Out
Speaker 15W+15W
Feature Full HD
HD Ready
3D Combo Filter
3D De Interlacer
Noise Reduction
3:2/2:2 Pull down
X-Contrast (15000:1)
24p input
38
7
Dissembling the stand base
1 Disconnect all the cables and cords from the TV to prevent breakage.
2 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3 Remove the six (6) screws so that the stand base can be removed.
4 Gently remove the stand base.
( For reference only )
Wall mounting the TV:
1 Purchase a VESA compatible wall bracket:
VESA 400 X 400, 4 holes, M6, 20mm.
2 Locate your ideal TV position on the wall.
3 Fix the wall bracket firmly on the wall.
4 Secure the TV to the bracket using the 4
mount holes on the back and center of the
TV.
English
Note:
• Please read the instructions of your specific wall bracket to properly wall mount
the TV.
• The pitch of the mounting holes is 400mm horizontally and 400mm vertically.
• The screws type required is metric: M6, 20 mm length.
• The 55" TV stand base can be screwed on a table or a hard surface using the
hole on the back of the stand base. Nevertheless, it’s recommended to mount
your TV on the concrete wall.
*Installing the LCD TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. please contact with
Hannspree dealers in wall mount bracket. You can ask a qualified service personnel about
using an optional bracket to mount the TV to the wall. Please add rubber cover when this TV is
mounted on the wall.
Equipment to be used with for open site.
39
English
8
Using the Cable Organizer
Route the cables through the cable clamp as shown:
40
Loading...