Hanns.G HT271HPB User Manual
LCD Display
HT271HPB(HSG1282)
User’s Manual OSD[V6.0]
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for help.
Before operating the monitor, please read this manual thoroughly. This manual should be retained for
future reference.
FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
connected.
The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two
conditions﹕(1) this device may not cause harmful interference﹔and (2) this device must accept any
interference received, including interference that may cause undesired operations.
CANADA
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulation.
【Optional, depend on selected model】
This device complies with requirement of EMC directive 2004/108/EC with regard to
Electromagnetic Compatibility, and 2006/95/EC and 93/68/EEC with regard to Low Voltage
directive.
【Optional, depend on selected model】
Socket-outlet shall be near the equipment and shall be accessible.
Trademark Notice:
Hanns.G products incorporate High-Definition Multimedia Interface
(HDMITM) technology.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
2
User’s Manual
RECYCLING INFORMATION
We, at HANNspree care very much about our environment protection strategy and firmly believe
that it helps us have healthier earth via appropriate treatment and recycling of industrial technology
devices at the end-of-life.
These devices contain recyclable materials, which can be re-decomposed and re-integrated into
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned
substances. We strongly encourage you to contact the provided information to recycle this product.
For more information, please visit
http://www.hannspree.eu/
3
User’s Manual
SAFETY NOTICE.................................................................................................... 5
PRECAUTIONS.................................................................................................. 5
SPECIAL NOTES ON LCD MONITORS........................................................6
BEFORE YOU OPERATE THE MONITOR....................................................... 7
FEATURES...........................................................................................................7
CHECKING THE CONTENTS OF THE PACKAGE....................................7
POWER.................................................................................................................8
SETTING THE MONITOR ON THE WALL................................................. 8
MAKING CONNECTIONS............................................................................... 9
ADJUSTING THE VIEWING ANGLE..........................................................10
OPERATING INSTRUCTIONS........................................................................... 11
GENERAL INSTRUCTIONS.......................................................................... 11
FRONT PANEL CONTROL............................................................................12
HOW TO ADJUST A SETTINGS....................................................................14
PLUG AND PLAY............................................................................................. 17
TECHNICAL SUPPORT (FAQ)...........................................................................18
Q & A FOR GENERAL PROBLEMS.............................................................18
ERROR MESSAGE & POSSIBLE SOLUTIONS........................................ 20
APPENDIX..............................................................................................................22
SPECIFICATIONS............................................................................................22
TABLE OF CONTENTS
4
User’s Manual
1. The changes or modifications not expressly approved by the party responsible for compliance
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized
4. Only use attachments/accesories specified by the manufacturer.
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
The monitor should be operated only from the type of power source indicated on the label. If you
Unplug the unit during a lighting storm or when it will not be used for long period of time. This
Do not overload power strips and extension cords. Overloading can result in fire or electric
Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a
Do not attempt to service the monitor by yourself; opening or removing covers can expose you
The wall socket shall be installed near the equipment and shall be easily accessible.
SAFETY NOTICE
could void the user's authority to operate the equipment.
emission limits.
modification to this equipment. It is the responsibilities of the user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high
voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified
personnel only.
PRECAUTIONS
swimming pool or in a wet basement.
person and cause serious damage to the appliance. Use only a cart or stand recommended by the
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a
mounting kit approved by the manufacturer and follow the kit instructions.
reliable operation of the monitor and to protect it from overheating, be sure these openings are
not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not
place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase
or cabinet unless proper ventilation is provided.
are not sure of the type of power supplied to your home, consult your dealer or local power
company.
will protect the monitor from damage due to power surges.
shock.
fire or electric shock. Never spill liquids on the monitor.
to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.
5
User’s Manual
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the
You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or
Due to the nature of the LCD screen, an afterimage of the previous screen may remain after
If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
Power Switch and then turn it on again to make sure the flicker disappears.
less such as a missing pixel or a pixel lit all of the time.
switching the image, when the same image is displayed for hours. In this case, the screen is
recovered slowly by changing the image or turning off the Power Switch for hours.
service center for repair. Do not attempt to repair the monitor yourself.
6
BEFORE YOU OPERATE THE MONITOR
68.6cm / 27” Wide Screen TFT Color LCD Monitor
Crisp, Clear Display for Windows
EPA ENERGY STAR
®
【Optional, depend on selected model】
GP Green Product
Ergonomic Design
Space Saving, Compact Case Design
FEATURES
CHECKING THE CONTENTS OF THE PACKAGE
The product package should include the following items:
LCD Monitor
User’s Manual
Cables and User manual
Power Adaptor
Warranty Card
(optional)
Quick Start Guide
VGA Cable Audio Cable USB Cable
Power Cord
7
Loading...