Hanns.g HT273HPB, HSG1305 User Manual

LCD Display

HT273HPB(HSG1305)

User’s Manual OSD[V6.2]

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

 Consult the dealer or an experienced radio/TV technician for help.

Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference.

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

connected.

The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two conditions﹕(1) this device may not cause harmful interference﹔and (2) this device must accept any

interference received, including interference that may cause undesired operations.

CANADA

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.

【Optional, depend on selected model】

This device complies with requirement of EMC directive 2004/108/EC with regard to Electromagnetic Compatibility, and 2006/95/EC and 93/68/EEC with regard to Low Voltage directive.

【Optional, depend on selected model】

Socket-outlet shall be near the equipment and shall be accessible.

Trademark Notice:

Hanns.G products incorporate High-Definition Multimedia Interface

(HDMITM) technology. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

User’s Manual

RECYCLING INFORMATION

We, at HANNspree, care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned substances. We strongly encourage you to contact the provided information to recycle this product.

For more information, please visit

http://www.hannspree.eu/

TABLE OF CONTENTS

SAFETY NOTICE.................................................................................................... 5

PRECAUTIONS.................................................................................................. 5

SPECIAL NOTES ON LCD MONITORS........................................................6

BEFORE YOU OPERATE THE MONITOR....................................................... 7

FEATURES...........................................................................................................7

CHECKING THE CONTENTS OF THE PACKAGE....................................7

POWER.................................................................................................................8

SETTING THE MONITOR ON THE WALL..................................................8

MAKING CONNECTIONS............................................................................... 9

ADJUSTING THE VIEWING ANGLE..........................................................10

OPERATING INSTRUCTIONS........................................................................... 11

GENERAL INSTRUCTIONS.......................................................................... 11

FRONT PANEL CONTROL............................................................................ 12

HOW TO ADJUST A SETTINGS....................................................................14

PLUG AND PLAY............................................................................................. 17

TECHNICAL SUPPORT (FAQ)...........................................................................18

Q & A FOR GENERAL PROBLEMS.............................................................18

ERROR MESSAGE & POSSIBLE SOLUTIONS........................................ 20

APPENDIX.............................................................................................................. 22

SPECIFICATIONS............................................................................................22

User’s Manual

1. The changes or modifications not expressly approved by the party responsible for compliance

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the

3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized

4. Only use attachments/accesories specified by the manufacturer.



Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,



Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a



Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure



The monitor should be operated only from the type of power source indicated on the label. If you



Unplug the unit during a lighting storm or when it will not be used for long period of time. This



Do not overload power strips and extension cords. Overloading can result in fire or electric



Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a



Do not attempt to service the monitor by yourself; opening or removing covers can expose you



The wall socket shall be installed near the equipment and shall be easily accessible.

SAFETY NOTICE

could void the user's authority to operate the equipment.

emission limits.

modification to this equipment. It is the responsibilities of the user to correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.

PRECAUTIONS

swimming pool or in a wet basement.

person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.

reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.

are not sure of the type of power supplied to your home, consult your dealer or local power company.

will protect the monitor from damage due to power surges.

shock.

fire or electric shock. Never spill liquids on the monitor.

to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.

SPECIAL NOTES ON LCD MONITORS



Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the



You may find slightly uneven brightness on the screen depending on the desktop pattern you use.



The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or



Due to the nature of the LCD screen, an afterimage of the previous screen may remain after



If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or

The following symptoms are normal with LCD monitor and do not indicate a problem.

Power Switch and then turn it on again to make sure the flicker disappears.

less such as a missing pixel or a pixel lit all of the time.

switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.

service center for repair. Do not attempt to repair the monitor yourself.

User’s Manual

 68.6cm / 27” Wide Screen TFT Color LCD Monitor

 Crisp, Clear Display for Windows

 EPA ENERGY STAR

【Optional, depend on selected model】

 GP Green Product

 Ergonomic Design

 Space Saving, Compact Case Design

VGA Cable Audio Cable USB Cable

BEFORE YOU OPERATE THE MONITOR

FEATURES

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

LCD Monitor

Cables and User manual

Power Adaptor

Warranty Card

(optional)

Quick Start Guide Power Cord

+ 15 hidden pages