Hanns.G Hi221DPB User Manual

Contents of the Package

*
LCD Mo
nitor
Po
User’
Screen
wer Cord
nual
s ma
*A
ccessor
VGACable
W
arranty Card
- 2
-
Base
Audi
DVI-D Cable (
o Ca
ble
Optio
nal)
Installation
and Removal
Install
-3-
R
emo
ve
I/O Port
s Co
nnection
POWER AUDIO DVI D-SUB
- 4
-

Control Buttons

LEDPowerVolume +Volume -Auto adjustMenu
- 5
-

Quick setup

1. Power on the computer and monitor.
2. Start the operating system.
3. Insert the CD-ROM into the CD drive on your computer. The CD-ROM will automatically execute and display the Main Menu.
4. From the Main Menu, click on the options you would like to perform and follow the directions on the screen.

Troubleshooting

Problems Check items
No video
The power LED
didn’t lit.
No video
The power LED is in
the color of orange.
Warning: To reduce the risk of electric shock or damage to your equipment:
1. Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
2. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
3. Disconnect power from the monitor by unplugging the power cord from the electrical outlet.
Check whether the power of screen is on or not.
Ensure the power cord is connected to screen properly.
Ensure the power supply is normally in the outlet by tester.
Ensure the computer is not in the power save mode.
(Move mouse or hit any key to wake up the computer)
Ensure the computer or the equipment of video source is on.
Ensure the video signal cable is connected properly.
- 6 -
Loading...
+ 10 hidden pages