Eden Eden Eden
Eden C: Celsius Model
Eden F: Fahrenheit Model
SPECIFICATIONS:
Range
Eden C
Eden F
Resolution
Eden C
Eden F
Accuracy (@20°C/68°F)
Eden C
Eden F
-40 to 650 °C
-40 to 1200 °F
1 °C
1 °F
±2 °C
±4 °F
Typical EMC Deviation
Eden C
Eden F
Environment
Battery Type
Life
Dimensions
Weight
Probe
±2 °C
±4 °F
0 to 50ºC (32 to 122ºF);
95% RH max.
3 x 1.4V alkaline
approx. 700 hours
of continuous use
106 x 68 x 21 mm
(4.2 x 2.7 x 0.8")
80 g (2.8 oz.)
Stainless steel with
1 meter (3.3') cable
OPERATION:
• Slide open the
back cover. Insert the 3-pin
connector of
your probe into
the socket.
• To exchange
the probe,
open the back
cover and disconnect the
probe connector and insert
the new probe.
• To turn the
Eden on, slide
down the front
cover and
push the ON/
OFF switch
to the ON
position.
Eden Eden Eden
BATTERY REPLACEMENT:
• When the Eden cannot be
switched on or the display
fades, pull out the back cover,
remove the battery cover and
replace all three 1.4V batteries, paying attention to their polarity.
Batteries should only be replaced in a safe area using
the battery type specified in this
instruction sheet.
ACCESSORIES:
HI 76504/P3 3 x 1.4V alkaline bat-
teries
PROBE EC Air/gas probe
90mm
3.5"
240mm
9.4"
PROBE EL Liquid/general pur-
pose probe
90mm
3.5"
235mm
9.3"
PROBE EM Surface probe
90mm
3.5"
270mm
10.6"
PROBE EP Penetration/general
purpose probe
SUGGESTIONS FOR USERS:
Before using this product, make sure that it is entirely
suitable for the environment in which it is used.
Operation of this instrument in residential areas could
cause interference to radio and TV equipment. Any
variation introduced by the user to the supplied
equipment may degrade the instrument's EMC
performance. To avoid electrical shocks, do not use
this instrument when voltage at the measurement
surface exceeds 24 VAC or 60 VDC. To avoid damage
or burns, do not perform any measurement in
microwave ovens.
Visit our Internet Home Page:
http://www.hannainst.com
ISTREDENR1 02/97