Instruction Manual
HI 93530 - HI 93531
HI 93532 - HI 93551
HI 935005 - HI 935006
HI 935007
Microprocessor-based
Thermocouple Thermometers
ins
rum
n
s
°C
°F
MEM-
HOLD
HI
MR
K-THERMOCOUPLE
THERMOMETER
HI 93531
LO
OFF
ON
°C
http://www.hannacan.com
These Instruments are in
Compliance with the CE Directives
MANK93R3
04/98
http://www.hannacan.com
PRINTED IN
ITALY
2
Dear Customer,
Thank you for choosing a Hanna Instruments
Product.
Please read this instruction manual carefully
before using the instrument. This manual will
provide you with all the necessary information
for the correct use of the instrument, as well
as a precise idea of its versatility in a wide
range of applications.
These instruments are in compliance with the
directives EN 50081-1 and EN 50082-1.
TABLE OF CONTENTSTABLE OF CONTENTS
Preliminary Examination ............................ 3
General Description .................................... 3
Functional Description and
Specifications of HI 93530 .......................... 5
Functional Description and
Specifications of HI 93531 .......................... 6
Functional Description and
Specifications for HI 93532 ......................... 7
Functional Description and
Specifications of HI 93551 ........................ 8
Functional Description and
Specifications of HI 935005 ...................... 9
Functional Description and
Specifications of HI 935006 .................... 10
Functional Description and
Specifications of HI 935007 .................... 11
Operational Guide ................................... 12
Display Codes Guide ............................... 19
Battery Replacement............................... 20
Calibration ............................................... 20
Shockproof Rubber Boots ....................... 21
Accessories ............................................. 22
Warranty.................................................. 26
CE Declaration of Conformity ................. 27
CE DECLARATION OF CONFORMITY
Recommendations for Users
Before using these products, make sure that they are entirely suitable for the environment
in which they are used.
Operation of these instruments in residential area could cause unacceptable interferences
to radio and TV equipments, requiring the operator to take all necessary steps to correct
interferences.
Any variation introduced by the user to the supplied equipment may degrade the instruments'
EMC performance.
In particular cases the instruments could turn off. In such cases they can be turned on by
pressing the ON/OFF key.
To avoid electrical shock, do not use these instruments when voltages at the measurement
surface exceed 24VAC or 60 VDC.
To avoid damages or burns, do not perform any measurement in microwave ovens.
3
PRELIMINARY EXAMINATION
Remove the instrument from the packing
material and examine it carefully to make
sure that no damage has occurred during
shipment. If noticeable damage is evident,
notify your Dealer.
Each thermometer comes supplied with a
9V battery and instruction manual.
Note: Save all packing material until you
are sure that the instrument functions
correctly. All defective items must be
returned in the original packing together with the supplied accessories.
GENERAL DESCRIPTION
HI93530, HI 93531, HI 93532, HI 935005 and
HI935007 allow temperature measurement
using interchangeable K-type thermocouple
probes.
HI 93551 allows temperature measurements
with different types of thermocouples
(K - J - T). This meter is equipped with a key
that switches range from K-type to J-type or
T-type thermocouples.
HI935006 and HI935007 are specifically de-
signed for the food industry. HI935006 al-
lows temperature measurement using interchangeable T-type thermocouple probes.
HI935007 uses a fixed K-type penetration
temperature probe (HI 766C) with 1 m (3.3')
cable.
The non-linearity of the temperature probe
is linearized by the built-in microprocessor,
in order to achieve high degree accuracy
and resolution. It also permits accurate compensation for drifts in the measurement circuit and the reference junction.
All Hanna Instruments meters are warranted
for two years against defects in workmanship and materials when used for their intended purpose and maintained according
to instructions.
The probes are warranted for a period of
six months.
This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed maintenance are
not covered.
If service is required, contact the dealer
from whom you purchased the instrument. If
under warranty, report the model number,
date of purchase, serial number and the
nature of the failure. If the repair is not
covered by the warranty, you will be notified
of the charges incurred. If the instrument is
to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization Number from the Customer Service department
and then send it with shipment costs prepaid. When shipping any instrument, make
sure it is properly packaged for complete
protection.
To validate your warranty, fill out and return
the enclosed warranty card within 14 days
from the date of purchase.
All rights are reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
WARRANTY
Hanna Instruments reserves the right to
modify the design, construction and appearance of its products without advance
notice.
4
HI 93532 has two built-in K-type probe connectors. By simply pressing a button, the
meter switches between the two readings on
the display. A "∆T" button will display the
difference between the two probe readings.
Standard features include:
• Interchangeable probes (except HI935007)
• Clear Liquid Crystal Display
• Two year Warranty
• Possibility of switching between the Centigrade and the Fahrenheit scale (for
HI93530, HI 93531, HI 93551, HI 935005,
HI935007 only)
• HOLD function that freezes the reading
on the display (for HI93530, HI 93551
and HI 935005 only)
• HI-LO memory recall function (for
HI 93531, HI 93551 and HI 935005 only)
• Low battery detection.
All these functions are easily accessible
through the keypad.
Self-explanatory symbols are used to remind the user of the operating mode or
condition.
Hanna manufactures several K-type thermocouple probes for different applications.
See pages 22-25 for more details.
HI 766E2 General use probe, max 900°C/1650°F
HI 766F High temperature wire probe without
handle, max 1100°C/2000°F
HI 766F1 Flexible probe without handle, max
480°C/900°F
HI 766TV1 Pipe clamp probe, max 200°C/390°F
1m
3.3’
2mm
0.08"
35mm
1.4"
Max.
1.5mm
0.06"
255mm
10"
Other accessories:
HI 710004 Soft carrying case measuring
150x90x30mm
HI 710007 Blue rubber boot measuring
155 x 90 x 45 mm
HI 710008 Orange rubber boot measuring
155 x 90 x 45 mm
HI 710031 Rugged carrying case
MANK93R3 Instruction manual
5
FUNCTIONAL DESCRIPTION AND
SPECIFICATIONS OF HI 93530
1. Liquid Crystal Display
2. ON/OFF Key
3. Reading Hold Key
4. Measuring Scale Key (°C or °F).
Specifications
Range -200.0 to 1370°C
-300.0 to 2500°F
Resolution 0.1°C (-200.0 to 999.9°C)
1°C (1000 to 1370°C)
0.1°F (-300.0 to 999.9°F)
1°F (1000 to 2500°F)
Accuracy ±0.2% F.S.
for one year, excluding probe error
Typical EMC ±3°C
Deviation ±6°F
Probe K-thermocouple (optional)
(see pages 22-25)
Battery 9V/100 hours of continuous use
Environment 0 to 50°C (32 to 122°F); 95% RH
Dimensions 143x80x38mm (5.6x3.2x1.5")
Weight 320 g (11.3 oz.)
ins rum n
s
°C
°F
HOLD
K-THERMOCOUPLE
THERMOMETER
HI 93530
-200°C to 1370°C
-300°F to 2500°F
RANGE:
OFF
ON
°C
K
1
2
3
4
300mm
11.8"
30m
m
1.2
"
130mm
5.1"
8m
m
0.3
"
HI 766B1 90° surface probe, max 450°C/840°F
HI 766B2 Surface probe, max 900°C/1650°F
HI 766B3 Small surface probe with insulated shaft,
max 200°C/390°F
HI 766C Penetration probe, max 900°C/1650°F
HI 766D Air probe, max 300°C/570°F
HI 766E1 General use probe, max 900°C/1650°F
130mm
5.1"
5m
m
0.2
"
Loading...