Hanin Electronic Technology HT300, HT330 User Manual
Label Printer
User Manual
HT300
HT330
Xiamen Hanin Electronic Technology Co.,Ltd
ADD:
Room 305A,Angye Building,Pioneering Park,
Torch High-tech Zone,Xiamen,China.
Tel.:
+86-(0)592-5885993
Fax:
+86-(0)592-5885992
Web:
www.hprt.com
Contents
Manual Information
........................................................................................................................
1
Important Safety Instructions
.........................................................................................................
2
Chapter 1 Introduction
...................................................................................................................
5
1.1 Packing List
.........................................................................................................................
5
1.2 Appearance and Components
...........................................................................................
6
1.3 Dimension
..........................................................................................................................
8
Chapter 2 Specifications
.................................................................................................................
9
Chapter 3 Installation & Usage
.....................................................................................................
11
3.1 Media Loading
.................................................................................................................
11
3.2 Power Connection
............................................................................................................
16
3.3 Peripherals Connection
....................................................................................................
17
3.4 Detection
..........................................................................................................................
18
3.5 Operation Panel
...............................................................................................................
27
3.6 Basic Operation
................................................................................................................
29
Chapter 4 Interface
.......................................................................................................................
31
4.1 USB Interface
...................................................................................................................
31
4.2 Other Optional Interfaces
................................................................................................
32
Chapter 5 Maintenance & Adjustment
.........................................................................................
34
5.1 Cleaning Media Sensor
....................................................................................................
34
5.2 Cleaning Thermal Print Head
...........................................................................................
34
5.3 Cleaning Roller and/or Paper Path
...................................................................................
35
Chapter 6 Label Printer Utility Instructions
..................................................................................
36
6.1 Installation Preparation
...................................................................................................
36
6.2 Usage
................................................................................................................................
36
Chapter 7 Seagull Windows Driver Instructions
...........................................................................
46
7.1 Introduction
.....................................................................................................................
46
7.2 Installation Preparation
...................................................................................................
46
7.3 Installation
.......................................................................................................................
47
7.4 Usage
................................................................................................................................
52
7.5 Label’s Width
....................................................................................................................
68
Chapter 8 BarTender® Ultralite Instructions
.................................................................................
69
8.1 Introduction
.....................................................................................................................
69
8.2 Installation Preparation
...................................................................................................
69
8.3 Installation
.......................................................................................................................
70
8.4 Usage
................................................................................................................................
74
HT300/HT330 User Manual
Statement
This manual content may be altered without permission, and our company reserves the rights
to make changes without notice in technology, spare parts, hardware and software of the
products. If more information is needed about the products, please contact our company.
Without any written permission from our company, any section of this manual is prohibited to
be copied or transferred in any form.
Copyright
This manual is printed in 2016, the copyright belongs to Xiamen Hanin Electronic Technology
Co. Ltd.
Printed in China
1.0 Version
Warnings
This must be complied with in order to avoid any damage to the human body and the
equipment.
This is showing the important information and tips for the printer operation.
Note: Due to continuous update of our product, the description of printer specification,
accessories, design in this manual may be slightly different. Please keep in kind prevail.
1
Manual Information
This user manual contains basic information for product usage as well as for emergency
measures that may be required.
The installation and usage of printer driver, utility tool and HPRT BarTender® Ultralite are also
included in the manual.
HT300/HT330 User Manual
2
Important Safety Instructions
Before using the present appliance, please carefully read the following safety regulations in
order to prevent any hazard or material damage.
1.Safety warning
Warnings: The print head will become very hot during printing; avoid contact with the
print head after printing has finished.
Warnings: Do not touch the printer head and connector in case static damage the
printer head.
2.Instructions
Warnings: Violating following instructions may cause serious injury or death.
1) Do not plug several products in one multiperture outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before usage.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multiperture outlet.
2) You must use the supplied adapter.
• It is dangerous to use other adapters.
3) Do not pull the cable to unplug.
• This may damage the cable, which is the origin of a fire or a breakdown of the printer.
4) Do not plug in or unplug with your wet hands .
• You may be electrocuted.
5) Do not bend the cable by force or leave it under any heavy object.
• A damaged cable may cause a fire.
HT300/HT330 User Manual
3
Caution: Violating following instructions may cause slight damage of the appliance.
1) If you observe a strange smoke, odour or noise from the printer, unplug it before taking
following measures.
• Switch off the printer and unplug the set from the mains.
• After the disappearance of the smoke, call your dealer to repair it.
2) Install the printer on the stable surface.
• If the printer falls down, it may be broken and you may hurt yourself.
3) Use the approved accessories only and do not try to disassemble, repair or remodel it by
yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
4) Do not let water or other foreign objects drop into the printer.
• If this happened, switch off and unplug the printer before calling your dealer.
5) Do not use the printer when it is out of order. This can cause a fire or an electrocution.
• Switch off and unplug the printer before calling your dealer.
6) Other considerations:
• Place the printer on a solid and even base so that it cannot fall.
• Leave enough space around printer for operation and maintenance.
• Keep all liquids away from the printer.
• Do not expose the printer to high temperatures, direct sunlight or dust.
• Ensure the printer is connected to a socket with the correct mains voltage.
• Switch off the printer POWER supply when it’s not in use for a long time.
• To ensure the printing quality and reliability, suggest use the same quality or recommend
paper supplier.
• Pls. switch off the POWER supply when connect/disconnect all the ports or it will cause
damage to the printer control circuit.
• Never carry out maintenance or repair work yourself. Always contact a qualified service
Technician.
HT300/HT330 User Manual
4
• Keep this User Manual in a place which is easily accessible at all times.
3.Other Precautions
The copyright for this user manual and various other manuals is property of our company. Any
copying or conversion into electronic form and saving of this material without the express
written permission is strictly prohibited. Use of the information contained in this manual is not
subject to any patent liability. This manual has been prepared with utmost care and attention
to detail but may contain certain errors and/or omissions. Our company is not legally liable for
any damages resulting from the use of the information in this manual. Our company and its
affiliates are not legally liable (United States excluded) for any damages, loss, costs, and/or
expenses that result from the breakdown, malfunction, and/or misuse of the product due to
violation or neglect of the operation and maintenance information and instructions provided
by our company, as well as from the unauthorized alteration, repair, and/or modification of the
product by the user and/or third party. We are not legally liable for any damages and/or issues
resulting from the use of options and/or parts that are not authentic or authorized products.
4.WEEE (Waste Electrical and Electric Equipment)
This mark shown on the product or its literature indicates that the corresponding
item should not be discarded at the end of its working life with other household
waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate marked items from other types of
waste and recycle them responsibly to promote the sustained reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office for details of where and how they can conduct environmentally safe
recycling of such items. Commercial users should contact their suppliers and check the terms
and conditions of purchase contracts. This product should not be combined with other
commercial waste for disposal.
Caution: This is a Class A product. In a domestic environment this product may cause
radio interference in which the user may be required to take adequate measures.
HT300/HT330 User Manual
Rev.1.0
5
Chapter 1 Introduction
1.1 Packing List
Note:
1.Unpack the printer and keep the packing materials in case you need to ship the printer in the
future.
2.Any damages exist, please contact the local dealer.
Printer AC Adapter Power Cord
USB Cable Empty Ribbon Core Ribbon
Label Supply Spindle Label Supply Plates Ribbon Spindles
Label Roll CD Quick Start Guide
Note：The packing materials are actually based on the order.
HT300/HT330 User Manual
Rev.1.0
6
1.2 Appearance and Components
￭
Front View
￭
Rear View
HT300/HT330 User Manual
Rev.1.0
7
￭ Inside View
Note：The views above are for your reference. Ports vary by your choice.
HT300/HT330 User Manual
Rev.1.0
8
1.3 Dimension
HT300/HT330 User Manual
Rev.1.0
9
Chapter 2 Specifications
(2/1)
Items
Parameter
HT300
HT330
Printing
Printing method
Thermal transfer
/ Direct thermal
Thermal transfer
/Direct thermal
Resolution
203dpi(8dots/mm)
300dpi(11.8dots/mm)
Printing speed
127mm/s Max.
102mm/s Max.
Printing width
108mm Max.
106mm Max.
Printing length
15mm - 1200mm
15mm - 1200mm
Processor
NUC976
Memory
RAM
32MB
Flash
16MB
Detection
Sensors
Adjustable reflective sensor,Fixed transmissive
sensor(Central aligned), Head-up sensor, Ribbon
end sensor
Media
Types
Roll-fed or Fan-fed,Die-cut or Continuous label,Tag
stock,Continuous receipt paper
Width
0.79’’(20mm) – 4.65’’(118mm)
Thickness
0.003’’(80um) – 0.007’’(180um)
Label roll
diameter
5’’(127mm)
Core diameter
1’’(25.4mm),1.5’’(38mm),3’’(76.2mm)
Ribbon
Types
Wax,Wax/Resin,Resin
Width
1.33’’(33.8mm) – 4.33’’(110mm)
Length
984’(300m)
Core diameter
1’’(25.4mm)
Programming Language
TSPL, ZPL
Software
Label design
HPRT BarTender Ultralite
Seagull Driver
Windows 2000,XP,Vista,7,8,10
Resident Fonts
Bitmap fonts
Fonts 0-8 / Fonts A-H,0,GS,P-V 90 ° , 180 ° , 270 °
rotatable. 10 times maximun expandable in
horizontal and vertical directions.
TTF fonts
Monotype CG Triumvirate™ scalable true type font
HT300/HT330 User Manual
Rev.1.0
10
(2/2)
Items
Parameter
Download Fonts
Bitmap fonts
90°, 180°, 270° rotatable, single characters 90°, 180°,
270° rotatable
Asian fonts
16x16, 24x24. Traditional Chinese, Simplified
Chinese, Japanese , Korean
Code Pages
DOS437,720,737,755,775,850,852,855,856,857,858,8
60,862,863,864,865,866,
Windows
1250,1251,1252,1253,1254,1255,1256,1257,1258
ISO8859-1,-2,-3,-4,-5,-6,-8,-9,-15
DBCS 932 (JIS), 936(GBK), 949 (Koran), 950(BIG5)
Barcode
1D
Code 39, Code 93, Code 128UCC, Code 128 subset A,
B, C, Codabar, Interleave 2 of 5, EAN-8, EAN-13,
EAN-128,
UPC-A, UPC-E, EAN and UPC 2 (5) digits add-on, MSI,
PLESSEY, POSTNET, RSS-Stacked, GS1 DataBar, Code
11
2D
PDF417, Maxicode, DataMatrix, QR Code, Aztec
Interfaces
Standard
USB,RS232,Ethernet
Optional
Bluetooth,WiFi (user install)
Control Panel
Two bi-color status LEDs:Ready,Status
Control key:Feed
Power
AC/DC switching power adapter
I/P: AC100-240V, 50/60Hz, O/P: DC 24V/2.5A
Environment
Operation
41℉(5℃)-104℉(40℃)，30%-85%,non-condensing
Storage
-4℉(-20℃)-122℉(50℃)，10%-90%,non-condensing
Physical
Characteristics
Dimension(L*W*
H)
285*226*171mm
Weight
2.26kg,excluding consumables
Options & Accessories
External label roll holder for 8’’ (203mm) OD label
rolls
Cutter module
Peeler module
Agency Approvals
FCC,CE
HT300/HT330 User Manual
Rev.1.0
11
Chapter 3 Installation & Usage
3.1 Media Loading
3.1.1 Paper Roll Loading
1.Press the cover open buttons and lift the printer cover.
2.
Release the latches and lift the printer mechanism.
HT300/HT330 User Manual
Rev.1.0
12
3.Put the roll into label supply spindle and then put the roll module into the printer.
4.Release and lift the printer mechanism. Then pass the labels through label guides and adjust
label guides to label’s width.
Note: If your printer is under Thermal Line Printing Method, press down the printer
cover until it snaps closed. Otherwise, continue the procedure in chapter 3.1.2.
HT300/HT330 User Manual
Rev.1.0
13
3.1.2 Ribbon Loading
1.After putting the ribbon into spindle, insert the left side of supply module into supply wheel,
and then insert the right side into the groove below.
2.After putting empty ribbon core into spindle, insert the left side of rewind module into
rewind wheel, and then insert the right side into the groove above.
HT300/HT330 User Manual
Rev.1.0
14
3.Pull up the ribbon and stick it to the empty ribbon core. Wind the core 2~3 circles until the
ribbon is pulled tightly.
4.Fix the mechanism and then close the cover.
HT300/HT330 User Manual
Rev.1.0
15
3.1.3 External Paper Roll Loading
If the paper roll is extremely
large, users can load the paper
roll outside(See the graph at
right). Pass the paper through
the external feed slot and then
through the paper guides.
HT300/HT330 User Manual
Rev.1.0
16
3.2 Power Connection
1. Make sure the printer’s power switch is in the off position.
2. Connect the AC adapter to power receptacle.
3. Connect the power cord to AC adapter.
4. Connect the other end of power cord to the outlet.
NOTE:
Use the original power adapter only. Avoid the damage caused by charging improperly.
Please unplug the printer power cord if it is not in use for a long time.
HT300/HT330 User Manual
Rev.1.0
17
3.3 Peripherals Connection
3.3.1 Interface Cable Connection
The standard for the printer’s interface cable shows in the following.
-- USB B-Type Cable
-- RS-232C(Serial) Cable
-- RJ45 Cable
Please follow the instructions to connect the cable.
1) Turn off the power switch.
2) Connect the communication cable to the printer communication port to be used.
-- Connect USB B-Type cable to the USB port.
-- Connect the RS-232C(Serial) cable to the serial port.
-- Connect the RJ45 cable to the ethernet port.
3.3.2 Bluetooth Connection
PDA with Bluetooth interface, laptop and other information terminals can drive the mobile
thermal printer HT300 or HT330. Instructions as follows:
1. Power on printer.
2. Primary device search for outer Bluetooth devices.
3. If there are some outer Bluetooth devices, choose HT300 or HT330.
4. Finish pairing.
Detailed pairing methods, please refer to primary devices Bluetooth Names.
After pairing, primary devices with virtual Bluetooth interface (smart phone , pocket PC,
palm, notebook) can drive mobile thermal printer HT300 or HT330 to printer through such
virtual Bluetooth interface.
Note: The original code is 1234.
HT300/HT330 User Manual
Rev.1.0
18
3.4 Detection
When printing paper, the moveable label sensor is used to detect paper. The label sensor
moves differently when using various kinds of paper. If user moves the sensor improperly,
paper may not be detected, therefore the printer could not print paper. The following
instructions tell users how to use label sensor correctly. Please read it carefully.
3.4.1 Continuous Paper
When printing continuous paper(Figure 1), the sensor shall be aimed at the left photoelectric
hole (Figure 2), which is the original position.
Figure 1 (Continuous Paper)
HT300/HT330 User Manual
Rev.1.0
19
Figure 2 (Left)
HT300/HT330 User Manual
Rev.1.0
20
3.4.2 Double-row Labels
When printing double-row labels(Figure 3), the sensor shall be aimed at the left photoelectric
hole (Figure 4), which is the original position.
Figure 3 (Double-row Labels)
HT300/HT330 User Manual
Rev.1.0
21
Figure 4 (Left)
HT300/HT330 User Manual
Rev.1.0
22
3.4.3 Punched Hole Label
When printing punched hole labels, move the sensor until it’s aimed at the right photoelectric
hole(Figure 5).
Figure 5 (Right)
HT300/HT330 User Manual
Rev.1.0
23
3.4.4 Label
When printing labels (thermal label/label)(Figure 6), the sensor shall be aimed at the left
photoelectric hole (Figure 7), which is the original position.
Figure 6 (Labels)
HT300/HT330 User Manual
Rev.1.0
24
Figure 7 (Left)
HT300/HT330 User Manual
Rev.1.0
25
3.4.5 Blackmark Paper
When printing blackmark paper(Figure 8), the sensor shall be aimed at the position of black
mark(Figure 9).
Figure 8 (Blackmark Paper)
HT300/HT330 User Manual
Rev.1.0
26
Figure 9 (aimed at blackmark’s position)
HT300/HT330 User Manual
Rev.1.0
27
3.5 Operation Panel
Loading...