Hanil HyperCOOL HC3055, HyperCOOL HC3110 Operation Manual

Operation Manual

HyperCOOL

HC3055 / HC3110

Product Model Name :

Date of Purchase :

HyperCOOL
HC3055/HC3110

© 2018 Hanil Scienti󽗉c Inc.

If you have any questions, contact our Technical Support Center.
[phone] / [e-mail]

www.ihanil.com

The appearance or speci󽗉cations of the device is subject to partial change for improvement.

HyperCOOL_HC3055_3110_Ver0.1

INDEX

1. Safety Precautions ---------------------------------- 4

1.1 Using this manual - 4

1.2 Safety Labels on the Device - 4

1.3 Safety Precautions - 5

2. Product Description -------------------------------- 6

2.1 Product Description - 6

2.2 Delivery Package - 7

2.3  Technical Speci󽗉cations - 8

3. Installation -------------------------------------------- 9

3.1 Wheel Lock - 9

3.2 Switching On the Device - 9

3.3 HyperCOOL Connection - 10

4. Operation ---------------------------------------------- 14

4.1  Key Functions of Control Panel - 14

4.2 Display - 15

4.3 Defrost - 15

4.4 Vacuum- 16

4.5 Time - 17

4.6 Keylock -18

5. Maintenance ------------------------------------------ 19

5.1  Outer Part of the Instrument - 19

5.2 Inside the Chamber - 19

5.3  Removing Dirt on the Condenser - 19

5.4 Fuse Replacement - 20

6. Troubleshooting ------------------------------------- 21

6.1 Possible Problems - 21

6.2 Error Codes - 22

6.3 Compliance - 23

7. Ordering Information ------------------------------ 24

www.ihanil.com

4 / 26

1. Safety Precautions

This manual is for the users who operate the device for the 󽗉rst time.
This manual provides information on the detailed instructions, precaution, troubleshooting
and maintenance care.
Keep this manual nearby for future reference.

The labels on the device represent safety instructions and directions.

Attention and warning

Attention and warning for
electric shock

1.1 Using this manual

1.2 Safety Labels on the Device

Technical Support : [phone] / [e-mail]

5/26

1. Safety Precautions

Before using the device, please read this operation manual to ensure correct usage. Incorrect
handling of the device may possibly result in personal injury or physical damage on the
device or its accessories.

1. ALWAYS locate the device on a 󽗊at, rigid and stable table capable of withstanding the
weight of the device and its operation.

2. ALWAYS make a safety zone of 30 cm around the device to indicate that neither
hazardous materials nor persons should be permitted within the area during operation.
▶ ALWAYS position the device with enough space on each side of device to ensure
proper air circulation.

3. The line voltage of the installation site should be within the rated voltage of this product. If
not complied, the device can be damaged.

4. Only use accessories manufactured by Hanil Scienti󽗉c Inc. Hanil Scienti󽗉c Inc. does not
guarantees any problems occurred by using incompatible accessories.

5. Remove any contaminants inside the chamber before operating the device.

6. Should not use 󽗊ammable, toxic, radioactive, explosive or corrosive materials.

7. The containers should be kept level while drying the samples in them.

8. Any kind of device repair must be performed only by Hanil Scienti󽗉c Inc. authorized service
engineers.

9. A proper disinfection procedure should be carried out before delivering the device to
service engineer.

10. Maintain all the accessories dry and clean to keep the best condition and to increase the
lifespan.

11. Avoid exposing the device to direct sunlight, extreme temperatures, or moisture.

1.3 Safety Precautions

www.ihanil.com

6 / 26

2. Product Description

2.1 Product Description

[Back side of the device]

[Right side of the device]

① ② ③ ④

⑤

⑦

⑥

① Vacuum Release Valve
② Tube Connection to Vacuum Pump
③ Mains Inlet
④ Power Outlet for Vacuum Pump
⑤ Mains Switch
⑥ Air Inlet

⑦ Drain Valve

Technical Support : [phone] / [e-mail]

7/26

2. Product Description

2.2 Delivery Package

- Hyper COOL 3055/3110

- AC Power Cable

- Hose

- Operation Manual

- Clamp

· Check all parts for damage that may have occurred during transportation.

· Check the delivery for completeness.

www.ihanil.com

8 / 26

2. Product Description

2.3 Technical Speci󽗉cations

HC3055

HC3110

Ultimate Chamber Temp (at RT) (℃) -55 -110

Chamber Volume (L) 4

Trap (Chamber) Size (Ø x L) 165 x 202

ICE Condensing Capacity (kg) 3

ICE Condensing Performance (kg/day) 2.5

Compressor 1/2HP

1/2HP x 2

Refrigerant R507

R507/R1150

Power Requirement (Resting, VA) 642 819

Dimension (W x D x H, mm) 400 x 660 x 570

Weight (kg)

58 72

Digital Readout

Temperature, Time

Function

KEYLOCK, DEFROST , VACUUM, TIME

Technical Support : [phone] / [e-mail]

9/26

3.2 Switching On the Device

· After installing the device, lock the wheel to prevent the device from moving.

3. Installation

3.1 Wheel Lock

1. Connect the AC power cord to the power socket on the backside of the device and put the
plug into a power outlet.

▶ Check the proper power and the fuse speci󽗉cation.

2. Switch the device on by pressing the mains switch on the right side of the device.
Turn on the switch to [ I ].

1. Press the lever of the swivel caster to lock the wheel.