Hangzhou Tuya Information Technology TYWE1S, TYWE1S User Manual

TYWE1S-IPEX DATASHEET
TYWE1S-IPEX UserManual
1. Product Overview
TYWE1S-IPEX is a low power consumption module with built-in Wi-Fi connectivity solution
designed by Hangzhou AiXiangJi Technology Co., Ltd. The Wi-Fi Module consist a highly
integrated wireless radio chip ESP8266EX and extra flash which has been programed with Wi-Fi
network protocol and plenty of software examples.TYWE1S also has an 32-bit CPU, 1M byte flash,
36k SRAM and various peripheral resources.
protocol function examples, users can customize their Wi-Fi product by using these software
examples.
Figure 1 shows the block diagram of the TYWE1S-IPEX.
Figure 1. The block diagram of theTYWE1S-IPEX
1.1 Features
Integrated low power consumption 32-bit CPU, also known as application processor
Basic frequency can support both 80MHz and 160MHz
Supply voltage range: 3V to 3.6V
Peripherals: 6×GPIOs, 1×UART , 1×ADC
Wi-Fi connectivity:
802.11 b/g/n20
Channel 1 to 11 @ 2412-2462MHz
Support WPA/WPA2
15.5dBm peak output power in 802.11b mode
Support STA/AP/STA+AP operation mode
Support Smart Link function for both Android and iOS devices
Standby power consumption is less than 0.1 mW (DTIM3)
On-board PCB antenna, or IPEX connector for external antenna
CE, FCC certified
Operating temperature range: 0 to 70 (Commercial grade), -40 to 85
(Industrial grade)
Intelligent Building
Intelligent home, Intelligent household applications
Health care
Industrial wireless control
Baby monitor
Webcam
Intelligent bus
1.2 Main Application Fields
TYWE1S-IPEX DATASHEET
TYWE1S-IPEX DATASHEET
PIN NO.
NAME
TYPE
DESCRIPTION
1
VCC
S
UART1 power (3.3V)
2
U1TX
I/O
UART1_TXD
3
U1RX
I/O
UART1_RXD
4
3V3
S
Supply voltage (3.3V)
5
GND
S
Ground
6
IO14
I/O
GPIO_14
7
IO12
I/O
GPIO_12
8
U0TX
I/O
UART0_TXD(used to print module's internal information)
9
IO0
I/O
GPIO_0(processing during initials, caution when used)
10
IO5
I/O
GPIO_5
11
U0RX
I/O
UART0_RXD(used to print module's internal information)
2. Dimensions and Footprint
2.1 Dimensions
TYWE1S-IPEX has 2 columns of Pins (2*9). The distance between each Pin is
1.5mm. Size of TYWE1S: 18mm(W)*23.5mm(L)*4.1mm(H)
Figure 2 shows the dimensions of TYWE1S-IPEX.
Figure 2. The dimensions of TYWE1S-IPEX
2.2 Pin Definition
Table 1 shows the general pin attributes of TYWE1S-IPEX
Table 1. The typical pin definition of TYWE1S-IPEX
Loading...
+ 7 hidden pages