Page 1
Snap 5S
ORIGINALITY DESIGN SMART - AND BEAUTIFUL
QUICK GUIDE
BATTERY CAM
Page 2
What's in the box
Snap 5S
Bracket
Pin
Power adapter
B x 2
A x 2
Screws(2 kinds) Rubber x 2
USB cable
Page 3
Lens
PIR
Microphone
Power button &
Status light
Speaker
Description
Power Port
Power
Status light
Microphone
SD card slot
Reset
Battery
Reset
DC 5V±10%
Press the button for 3 seconds to turn on/off the camera
Red light solids on: the camera network is abnormal
Red light blinks: awaiting WiFi connection, or currently
connecting (faster blinking)
Blue light solids on: camera running correctly
Capture sound for your video
Support local SD Card storage (Max.128G)
Press and hold on for 5 seconds with pin to reset the camera
SD card slot
Micro USB
Page 4
Install
1 Fix the bracket on the wall
3. Slide the camera slowly into the
bracket from the direction of the arrow
4. Adjust the camera's proper angle
2.Install rubber
*NOTE: Remove the rubber
before resetting
Page 5
Connect
Download
SmartLife is available for both iOS and Android OS. Search the name
'SmartLife'in App Store or Android Market, or scan below QR-Code to
download the App.
·Support
IOS
Android
Dowoload App(IOS&android)
Add device
Log in the SmartLife, select "Add Device", and add the smart camera to
the APP according to the screen tips(Make the smart camera close to the
router when configuring).
NOTE:If you need to re-select the WiFi network, please press and hold the "RESET"
button for 5 seconds, the device will restart, and the indicator will be flashing red.
Page 6
功能介绍Functions
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview
in App.
Full-duplex audio
You can see and hear the vistor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message
to your cell phone.
Low battery alarm
You can set a low-battery alarm threshold in your phone App. The threshold is
set to a minimum of 10% and a maximum of 50%. When the battery power of
the camera is lower than the set threshold, the App will have a reminder.
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Daytime Night
Page 7
FCC Statement
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment .This equipment should be
installed and operated with minimum distance 20cm between the
radiator& your body.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Loading...