Page 1
11S
ORIGINALITY DESIGN SMART - AND BEAUTIFUL
QUICK GUIDE
Page 2
What's in the box
Please consult this checklist for all parts.
Mini 11S
USB cable
Manual
Power adapter
Adhesive tape
Pin
1
Page 3
Status light
Reset
Speaker
SD card
slot
Description
Power
Status light
Microphone
SD card slot
Reset
Power
Note:
When you need to insert or pull out the SD card,
you need use a Pin to complete it.
DC5V±10%
Red light solids on: the camera network is abnormal
Blinking red light: awaiting WiFi connecting
Blue light solids on: camera running correctly
Blinking blue light: currently connecting
Captures sounds for your video
Supports local SD Card storage (Max.128G)
Press and hold the 'reset' for 5 seconds to reset the device(if
you have modified settings, they will return to factory defaults)
2
Microphone
Page 4
Install
1 Stick the adhesive tape in the middle of camera bottom
2 Put the camera on the clean plane
3
Page 5
Connect
Download
Smart Life is available for both iOS and Android OS. Rearch the name
'Smart Life'in App Store or Android Market, or scan the QR-Code to
download the App.
·Support
IOS
Android
Dowoload App(IOS&android)
Set up router
This device only supports 2.4GHz frequency band router, does not support
5GHz frequency band router, please set the relevant parameters of the router
before WiFi configuration, WiFi passwords do not include special characters
such as ~!@#$%^&*(). When the device is configured in WiFi, the mobile phone
and device are as close as to the router, which can speed up the configuration
of the device.
Please keep network available
4
Page 6
Registration process
Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy"
d click "Agree" .
an
Step 2
input a legal and valid Mobile number or Email address and click
"Continue". Input Verification Code, then log in the app.
5
Page 7
QR Code Configuration
1
Open the Smart Life App, click "Create family", and you can customize
the Family name and related settings .
2
Continue to click "Security & Sensor" >> "Smart Camera",and then choose
"Add Device" or "+",ready to add camera.
6
Page 8
3
In "Add Device" this interface,continue to click "next step",and then
you should input your WiFi's passwords.
Note:
) Camera only supports 2.4GHz WiFi network.
1
2
) The number of bits in the ssid and passwords of the router
shou
ld not exce
ed 24 digits.
7
Page 9
4
In this interface,you should scan the QR code in your phone with the
camera,when the camera comes out "dong dong dong". And you can
complete the configuration about 30s.
8
Page 10
5
When connecting,you should make sure your router,mobile,and camera
are as close as possible.When camera added successffully,click " "
you could also DIY the camera's name.
9
Page 11
Settings
In "Smart Camera" interface,click " ",you can set the camera common
functions.
10
Page 12
FAQ
Q: The camera cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close
to the router, if not, it is better to reset the camera and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reseted camera only resets the network configuration of the camera,
but cannot change the configuration in the App, remove the camera in
your account,need to add again.
Q: How to cut the camera network to other router?
A: First remove and reset the camera in your App account and then configure
your camera again by the App.
Q: Why doesn't the camera identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF
card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened;Message notification and
authority confirmation in the mobile phone system have been opened.
11
Page 13
Functions
Video flip
Flip your video stream vertically anytime for maximum flexibility.
Motion detection
Motion sensors will notify you when movement is detected.
Record
Record every moment using high capacity SD card storage or Cloud Storage.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Daytime Night
12
Page 14
FCC Statement
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment .This equipment should be
installed and operated with minimum distance 20cm between the
radiator& your body.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Loading...