Page 1
ORIGINALITY DESIGN SMART - AND BEAUTIFUL
3S
QUICK GUIDE
Page 2
What's in the box
Consult the checklist below for all components.
Bullet 3S
Screw package Manual
Power adapter
1
Page 3
Speaker
SD card slot
Description
Power
Status light
Microphone
SD card
Speaker
Reset 1&2
Status light
Reset1
Power
Reset2
Microphone
DC12V±10%
Red light solids on: the camera network is abnormal
Blinking red light: awaiting WiFi connection (faster blinking)
Blue light solids on: camera running correctly
Blinking blue light: currently connecting (faster blinking)
Captures sound for your video
Supports local SD Card storage (Max.128G)
Speaker speak with the app and it will revert too
Press and hold for 5 seconds to reset the camera (if you have
modified settings, they will return to factory defaults)
2
Page 4
Install
1 Fix the Camera to the wall with screws
2 Ajust camera angle to a correct view（as shown in the picture）
3
Page 5
Connect
Download
Smart Life is available for both iOS and Android OS. Rearch the name 'Smart Life'
in App Store or Android Market, or scan the QR-Code to download the App.
·Support
IOS
Android
Download App(IOS&android)
Set up router
This camera only supports 2.4GHz WiFi networks.Check that your WiFi router is
switched on.For a faster installation,place the camera and your smartphone near
the WiFi router(Internet box) in order to benefit from a better connection.
Please keep network available
4
Page 6
Registration process
Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy"
and click "Agree" .
Step 2
input a legal and valid Mobile number or Email address and click
"Continue". Input Verification Code, then log in the app.
5
Page 7
QR Code Configuration
1
Open the Smart Life App, click "Create family", and you can customize
the Family name and related settings .
2
Continue to click "Security & Sensor" >> "Smart Camera",and then choose
"Add Device" or "+",ready to add camera.
6
Page 8
3
In "Add Device" this interface,continue to click "next step",and then
you should input your WiFi's passwords.
Note:
1) Camera only supports 2.4GHz WiFi network.
2) The number of bits in the ssid and passwords of the router
should not exceed 24 digits.
7
Page 9
4
In this interface,you should scan the QR code in your phone with the
camera.When the doorbell comes out with a "dong dong dong" sound
you can complete the configuration in about 30 seconds.
8
Page 10
5
When connecting,you should make sure your router,mobile,and camera
are as close as possible.When camera added successffully,click " "
you could also DIY the camera's name.
9
Page 11
Settings
In "Smart Camera" interface,click " ",you can set the camera common
functions.
10
Page 12
FAQ
Q: In the network process, the process bar is always not 100%, add
failure?
A: This smart doorbell only supports 2.4GHz WiFi router, please make sure you
are using a 2.4GHz WiFi router.And confirm the WiFi password again.
Q: Repeated additions are failures?
A: After adding a failure, it is recommended to restart the device or power
off, and then try to add again.
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the smart doorbell close
to the router, and if not, it is recommended to reset the device and add it
again.
Q: How to cut the smart doorbell network to another router?
A: First remove and reset the smart doorbell on the App and then configure the
smart doorbell again by the App.
'
Q: Why I can
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened;Message notification and
authority confirmation in the mobile phone system have been opened.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF
card can't be identified when the internet environment is not good.
t get the notifications with my cell phone App?
11
Page 13
Functions
功能介绍
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send
you push notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD Storage or
Cloud Storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful
night-vision technology.
Daytime Night
12
Page 14
FCC Statement
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment .This equipment should be
installed and operated with minimum distance 20cm between the
radiator& your body.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Loading...