Page 1
IP CAMERA
MODEL: BELL 7S
ORIGINALITY DESIGN SMART - AND BEAUTIFUL
QUICK GUIDE
Page 2
What's in the box
Bell 7S
Double-sided tape
B x 2
A x 2
D x 1
Screws(3 kinds)
Power adapter(Optional)
Pin
I/M
Battery
1
USB cable
N/C Plate
Page 3
Speaker
Doorbell button &
Status light
Charging
indicator
Micro USB
Description
Power Port
Doorbell button
Status light
Microphone
SD card slot
Reset
Charging
indicator
Lens
PIR
SD card slot
Microphone
Reset
DC 5V
Press the button to activate the doorbell
Red light solids on: the camera network is abnormal
Red light blinking: awaiting WiFi connection, or currently
connecting (faster blinking)
Blue light solids on: camera running correctly
Captures sound for your video
Supports local SD Card storage (Max.128G)
Press and hold on for 5 seconds with pin to reset the doorbell,
(unable to unbind the bell from account)
Red indicator solids on: battery is charging
Blue indicator solids on: finishing charging
2
Page 4
Battery Installation
2.Nail expansion screws
Installation
2.Nail expansion screws
tape
or
tape
3.Fix the mounting bracket with screws
or tape(No need screws when install
tape)
3.Fix the mounting bracket with screws
or tape(No need screws when install
tape)
5.Tighten the screw
3.Tighten the wire with a
screwdriver
5.Install the doorbell into the
bracket
3
tape
or
tape
Be careful
with the
power!
6.Tighten the screw
Page 5
Connect
Download
Smart Life is available for both iOS and Android OS. Search the name
'Smart LIfe in App Store or Google Play, or scan the QR-Code to
download the App.
·Support
IOS
Android
Download App(IOS&android)
Add device
Log in the Smart Life, select "Add Device", and add the smart doorbell to
the APP according to the screen tips(Make the smart doorbell close to the
router when configuring).
NOTE:If you need to re-select the WiFi network, please press and hold the "RESET"
button for 5 seconds, the device will restart, and the indicator will be flashing red.
4
Page 6
FAQ
Q: The camera cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close
to the router, if not, it is better to reset the camera and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reseted camera only resets the network configuration of the camera,
but cannot change the configuration in the App, remove the camera in
your account,need to add again.
Q: How to cut the camera network to other router?
A: First remove and reset the camera in your App account and then configure
your camera again by the App.
Q: Why doesn't the camera identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF
'
t be identified when the internet environment is not good.
card can
Q: Why I can
'
t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened;Message notification and
authority confirmation in the mobile phone system have been opened.
5
Page 7
功能介绍Functions
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview
in App.
Full-duplex audio
You can see and hear the vistor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message
to your cell phone.
Low battery alarm
You can set a low-battery alarm threshold in your phone App. The threshold is
set to a minimum of 10% and a maximum of 50%. When the battery power of
the camera is lower than the set threshold, the App will have a reminder.
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Daytime Night
6
Page 8
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Warning:
To ensure normal use, please keep a detection distance of at least 20cm.
NOTE：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement：
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure
requirement
Loading...