Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to DS-3WF03C-D outdoor video wireless network bridge, the Manual includes
instructions for using and managing the product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest
version in the company website (http://overseas.hikvision.com/en/
).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES,
OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT
YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
2
User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
Attention that changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This product generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator
and your body
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the EMC
Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
3
User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for
specific battery information. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
4
User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
Chapter 1 Product Overview
DS-3WF03C-D is a powerful WIFI Bridge/AP/CPE device, which allows WIFI access and
video/audio/data transmission device, enables long-range, fast speed and robust
wireless connections. Integrated with Hikvision’s XTrans technology, DS-3WF03C-D has
the advantages of long-distance, high-throughput, and Strong anti-interference.
XTrans technologies include TDMA, 5M/10M/20M/40MHz bandwidth, intelligent rate
control, Auto ACK Time-Out Adjust and so on. TDMA technology solves the problems of
hidden-node problem in the 802.11 network. 5M/10M/20M/40MHz bandwidth can be
flexibly configured by the uses in different working scenario to achieve the best link
quality. Intelligent rate control algorithm can be adapted to quick channel quality
variations automatically, thus stabilizing the wireless throughput. ACK Time-Out Auto
Adjust can automatically detect the distances of the DS-3WF03C-D devices, and thus
adjust the wireless parameters to achieve the best wireless link quality.
The longest transmission range and max speed of DS-3WF03C-D can be as high as 5Km
and 300Mbps, making it suitable for many applications of WIFI Bridge/CPE, especially
have advantages for point-to-multi-point communication.
13.1 Product Advantages
The DS-3WF03C-D has the industrial leading technology, owing the performance
capability of a wireless base station with only a small form factor, furthermore, it has
very attractive low cost.
DS-3WF03C-D has the following advantages compared to the competitors:
1. Embedded XTrans technology
DS-3WF03C-D devices is embedded with XTrans technology, including TDMA,
5/10/20/40MHz bandwidth, intelligent rate control, Auto ACK Time-out adjust. They
make the device have longer transmission distance, higher throughput and better pointto-multi-point performance.
The longest transmission distance of DS-3WF03C-D can be as far as 5 km, and the max
throughput can be 300Mbps. It can satisfy the needs of most of the applications.
6
User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
3. Embedded hardware watchdog
DS-3WF03C-D is embedded with hardware watchdog, which is used to monitor the
working status of the device. Once the system is not working properly, the DS-3WF03CD device can be rebooted to guarantee the stability of the system.
4. Software Ping watchdog function
DS-3WF03C-D software ping watchdog function enable the device periodically ping
another device associated to, so that it can detect if the system is working well. If the
wireless link is lost or there is any problem, the device is rebooted. This is important
because the devices can be restored to work automatically if there is any problem, and
avoid the extra human labour to maintain the outdoor devices.
5. Outdoor industrial product
DS-3WF03C-D device can work at all kinds of outdoor severe environments, including 30 to 70 degree temperature, 5% to 95% humidity, while maintain good performance.
13.2 Electrical Specifications
The electrical specifications are shown are the following table:
Table 1-1 Specifications
7
User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
Web based working scenario selection makes the installation and setting much
easier
Reliable PoE power supply
Web-based configuration, easy to use
Waterproof housing and accessory kit protects
13.4 Typical Application
The DS-3WF03C-D usage examples are shown in figure; it can be used as WIFI AP, CPE,
or outdoor PTP, PTMP topology. Therefore, DS-3WF03C-D is suitable for various
applications like wireless video transmission, and wireless signal coverage.
9
User Manual of
can be usedwidelyinthefollowingapplications:
Wireless video surveillance(free
Carrier wireless backhaulandruralareainternetlast
Enterprise local areanetworkinter
WIFI signal coverageandruralwirelesscoverage
Hardware Overview
’s hardwareinformationisdescribedinthefollowing
Outdoor Video Wireless Network
way, city, police, oil pipeline,forestandetc.)
mile wirelesssolution
able:
DS-3WF03C-D
Bridge
13.5
Applications
DS-3WF03C-D
•
•
•
•
13.6
Figure 1-1 Typical Application
-
-connection
ast-
DS-3WF03C-D
10
ng t
User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
Hardware Specifications
CPU/Baseband
Radio
Atheros AR
9344
Memory
64MB DRAM, 8MB Flash
Physical Interface
2×10/100M Base
-
TX (Cat. 5/5E, RJ
-
45) Ports
LED Status
Power, LAN, WLAN, 3×Link Quality
Power supply
POE, Power Adapter 24V/0.5A
LED Color
Status
POWER
Green
ON = Device Power on
LAN Green
ON = Device connected to the network
OFF = Device radio is OFF
Showing the signal strength between the device
Yellow
Table 1-2 Hardware information
13.7 LED Description
The LEDs of DS-3WF03C-D can be divided to 2 groups. One group of LEDs are Indicators,
including the left 3 LEDs of figure, and they are Power, LAN and WAN indicators. The
other group of LEDs are Link Quality, including the right 3 LEDs of figure, shown the
signal strength.
Table 1-3 LED Information
WLAN Green
Red
Link Quality
Green
ON = Device radio is ON, but not sending or
receiving date through the wireless LAN.
BLINK= Device radio is ON, and sending or receiving
date through the wireless LAN.
and the network.
Green is ON = good quality
Yellow is ON = medium quality
Red = poor quality or no link
11
User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
12
Chapter 2Installation
This chapter describes how to install DS-3WF03C-D device in the bridge mode, and the
installation method of router mode can be seen in Chapter 7.
2.1
The connection of DS-3WF03C-D device to POE and power supply is shown in figure.
Connections and Installation
Figure 2-1 Connections at Bridge mode
DS-3WF03C-D has 2 RJ45 ports, and they are marked with “POE” and “LAN2” separately.
In the bridge mode, please connect the device with the POE power adaptor in the
following way:
1. Remove the bottom cover from the DS-3WF03C-D device, and you will see there are
2 RJ45 ports marked with “POE” and “LAN2”.
2. Using an Ethernet cable to connect the POE power adaptor and the “POE” port of
the DS-3WF03C-D device.
3. Connect the POE adaptor to the normal power supply board.
4. Normally, “LAN2” port of the DS-3WF03C-D can be connected to IP Camera and
User Manual of
other devices, or leaveitunconnected
3WF03C
Restore to theFactory
In some cases, uses can restorethedevicetothefactorysettingsbythefollowingwayin
. Push the reset buttonfor5~10secondsuntilallLED
will restore to the factory setting.Duringthisprocess,the
will be connected and disconnectedtwice.
For default, all the factorysettingsareshowninthefollowing
Table
DS-3WF03C-D
Outdoor Video Wireless Network
securely to the pole by locking the straptightly.
on.Th
WF03C
>Password:1234567890abc
Bridge
5. Mount the DS-
2.2
the figure
-D
Settings
DS-3
Figure 2-2 Restore to the factory settings
s are
en the device
-D’s RJ45 ports
Items
IP address
User name
Password
Output power
Encryption
Network mode
table.
2-1 Main parameters at the factory settings
Default Settings
192.168.1.35/192.168.1.36
admin
admin
High
WPA->WPA2->CCMP-
Bridge
13
User Manual of DS-3WF03C-D Outdoor Video Wireless Network Bridge
14
Chapter 3Quick Configuration
This chapter describe how to configure the device quickly.
3.1
Log In
To log in the DS-3WF03C-D device, user needs to configure the TCP/IP of your computer
first as the following steps:
1. Right click Local Area Connection icon of your computer and click properties, then
click Continue, the Local Area Connection Properties dialog box appears as figure.
Figure 3-1 Local Area Connection Properties
2. Select Internet Protocol (TCP/IP) and click Properties button, and the following
dialog box appear:
Loading...
+ 31 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.