Hangzhou Hikvision Digital Technology NOH1600 Users manual

H2THD

QUICK SETUP GUIDE

Home
& Business

SECURITY SYSTEMS

QSG-H2THD.indd 1 2018/7/10 10:50

What’s in the Box

Package Contents

DISCLAIMER: The exact components of your system, images and quantities may vary depending on

your model number. While these may vary, this QSG will address the setup and initial configuration
of your DVR and cameras.

DVR Camera(s)

60 ft. Video/Power Cables

(1 cable per camera)

USB

Power Supply

(1 per IP camera)

Safety Sticker (x3)

(x4)

Power Splitter(s)

(1 per 4 cameras)

IP Camera

micro USB cable(s)

(1 per IP camera)

USB Mouse (x1)

IP Camera(s)

(x2)

6 ft. HDMI

(x1)

DVR Power

Adapter

(x1)

Items Not Included

Mounting
Template

6 ft. Ethernet

(x1)

Camera Power

Adapter(s)

(1 per 4 cameras)

RESET

LAN1 LAN2 LAN3 LAN4 WAN

Router

Mounting Hardware

Metal Base

(1 per IP camera)

Monitor

NOTE: Monitor is required

for initial setup.

IMPORTANT: For best results, use all the included Night Owl accessories. Third-party

accessories may not work properly.

1

QSG-H2THD.indd 2 2018/7/10 10:50

Product Overview

DVR Rear View

NOTE: Not all models have a

power switch on the DVR.

1010

WIRED /SYNC

4

2

Images used are for reference only. Your product may vary slightly.

Sync – Press and release to sync the DVR with the wireless cameras.

1

Video Inputs – Allows for the connection of BNC cameras.

2

USB Ports – Allows for the connections of a USB mouse and/or a USB flash drive.

3

A 4 channel model is displayed above.

31

5 6

You will connect the included USB mouse to assist you in navigating the DVRs menu
interface. You will connect a USB flash drive to download video files from the DVR
and save them to your USB flash drive.

HDMI Output – Allows for the video connection. If the TV/Monitor has an HDMI

4

input, connect the HDMI cable from the HDMI output port on the DVR to the HDMI
input port on your TV/Monitor. NOTE: Preferred method.

VGA Output – Allows for the video connection. If the TV/Monitor has a VGA input,

5

connect the VGA cable from the VGA output port on the DVR to the VGA input port
on your TV/Monitor. (VGA Cable not included)

Audio Inputs & Outputs – Allows for the connection of an audio-enabled camera

6

or self-powered microphone and an external speaker to the DVR. (Audio enabled
camera, microphone and speaker not included)

RJ-45 (Ethernet) Port – Used to connect the DVR to your router/modem via the

7

included Ethernet cable.

Power Input – Used to connect the included 12V DC power supply.

8

Power Switch – Use this switch to power ON/OFF the DVR. Make sure the power

9

switch is in the ON position before attempting to use the DVR.

10

Antennas – Connection for the included antennas.

7

9

8

2

QSG-H2THD.indd 3 2018/7/10 10:50

Connecting Your System

HDMI HDMI

NOTE: Monitor is required for initial setup. To

view cameras, TV/Monitor must be tuned to
the same Input the HDMI is plugged into.

1

Plug included HDMI cable into
the HDMI port on the back of
the DVR.

WIRED /

USB

3

Plug the USB mouse into the USB
port on the back of the DVR.

(Router Not

Included)

ETHERNET

5

Plug the other end of the
Ethernet cable into a numbered
port on the back of the router.

3

2

Plug the other end of the HDMI
cable into the back of the TV
or Monitor.

ETHERNET

4

Plug the included Ethernet cable
into the LAN port on the back of
the DVR.

DISCLAIMER: Camera/cable quantities may vary.

STOP: BEFORE installing, test

each camera locally to confirm they
function properly.

QSG-H2THD.indd 4 2018/7/10 10:50

Connecting Your Wired Cameras

FROM Camera TO Camera

NOTE: Audio enabled cameras will have

a white RCA connector to transmit audio
signal (Optional).

NOTE: Make sure you twist and lock BNC connectors.

WIRED /SYNC

1

Connect the ends of the cable
attached to the camera to the
ends of a video/power cable
labeled TO CAMERA ONLY.

Power Cable

Connectors

3

Connect the red female power

Power Splitter

Connectors

leads of the video/power cables
to the male power splitter ends.

2

Connect the BNC connector of the
video/power cable labeled TO DVR
ONLY to an open video input on
the DVR.

Camera Power

Adapter

Power
splitter

NOTE: Power adapters are labeled TO CAMERA

ONLY and TO DVR ONLY.

4

Connect the power splitter to the

Surge Protector

(Not included)

camera power adapter and plug the
adapter into a surge protector or
Uninterruptible Power Supply (UPS).

(Surge

Protector Not

included)

NOTE: Some systems will beep upon booting up.

5

Connect the DVR power adapter
to the Power Input on the rear
of the DVR.

QSG-H2THD.indd 5 2018/7/10 10:50

6

Plug the DVR power adapter into a
surge protector or Uninterruptible
Power Supply (UPS).

NOTE: Check that the UPS or surge protector

is switched ON.

4

Connecting Your Wireless Indoor IP Cameras

You MUST test the Wireless Indoor IP Cameras locally before
mounting. (DO NOT MOUNT OUTDOORS. SERIOUSLY!)
Plug the camera(s) in next to the DVR to make sure video is
transmitted. The camera(s) are already in pairing mode.

1

Insert the small end of the micro USB cable into the camera and the other
end into the USB power supply.

USB Power Supply

2

Plug the power supply into a socket or a UPS (Uninterruptible Power Supply).

micro USB Cable

OR

5

QSG-H2THD.indd 6 2018/7/10 10:50