Hangzhou Hikvision Digital Technology H2TP23 Users manual

Handheld Thermography Camera

User Manual

COPYRIGHT © 2018 Hikvision. ALL RIGHTS RESERVED

Handheld Thermography Camera · User Manual

User Manual

COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd.

ALL RIGHTS RESERVED.

Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries

(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the
Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly,

by any means, without the prior written permission of Hikvision. Unless otherwise
stipulated, Hikvision does not make any warranties, guarantees or representations,
express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Handheld Thermography Camera.
The Manual includes instructions for using and managing the product. Pictures, charts,

images and all other information hereinafter are for description and explanation only. The
information contained in the Manual is subject to change, without notice, due to firmware
updates or other reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of Hikvision

in various jurisdictions. Other trademarks and logos mentioned below are the properties
of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE,

IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR
A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN
NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR
AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR
LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

ii

Handheld Thermography Camera · User Manual

NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK,
HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN
ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW.
HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may
cause undesired operation

EU Conformity Statement

iii

Handheld Thermography Camera · User Manual

This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to
your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.

iv

Warnings Follow these
safeguards to prevent serious
injury or death.

Handheld Thermography Camera · User Manual

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid
danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Cautions Follow these

precautions to prevent potential
injury or material damage.

Warnings

 The device should be used in compliance with local laws and electrical safety

regulations. Refer to the appropriate documentation for detailed information.

 If the equipment is used in a manner not specified by the manufacture, the protection

provide by the equipment may be impaired.

 The device should be used in the environment within temperature range from -20 °C

to 50 °C (-4 °F to 122 °F), and humidity ≤90%

 The input voltage should conform to IEC60825-1 standard: SELV (Safety Extra Low

Voltage) and the Limited Power Source (Input 12 VDC, 1.5A, output 5 VDC, 2A).
Refer to the appropriate documentation for detailed information.

 Make sure the plug is properly connected to the power socket.
 If smoke, odor, or noise arises from the device, immediately turn off the power,

unplug the power cable, and contact the service center.

 The installer and user are responsible for password and security configuration and its

settings.

Cautions

 Do not drop the device or subject it to physical shock.
 Wipe the device gently with a clean cloth and a small quantity of ethanol, if

necessary.

 Do not aim the lens at the sun or any other bright light.
 When any laser equipment is in use, make sure that the device lens is not exposed to

the laser beam, or it may burn out.

v

vi

Handheld Thermography Camera · User Manual

 Do not expose the device to high electromagnetic radiation or extremely hot, cold,

dusty, or damp environments.

 Place the device in a dry and well-ventilated environment.
 Keep non-waterproof devices away from liquids.
 Keep the device in original or similar packaging while transporting it.
 A few device components (e.g., electrolytic capacitor) require regular replacement.

The average lifespan varies, so periodic checking is recommended. Contact your dealer
for details.

 Improper use or replacement of the battery may result in explosion hazard. Replace

with the same or equivalent type only. Dispose of used batteries in conformance with
the instructions provided by the battery manufacturer. The battery type is
E097-13-1S1P26650.

 Never attempt to disassemble the device.

Safety Instruction

CAUTION: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY. RISK OF
EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Laser Light Supplement Warning

Warning: The laser radiation emitted from the device
can cause eye injuries, burning of skin or inflammable
substances. Before enabling the Light Supplement
function, make sure no human or inflammable
substances are in front of the laser lens.

Manufacture address :

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Hangzhou Hikvision Digital Technology Co.,Ltd

vii

Handheld Thermography Camera · User Manual

Table of Contents

About This Manual .................................................................................... 1

Overview of Contents .......................................................................................... 1

1 Overview ........................................................................................... 2

1.1 Box Content .............................................................................................. 2

1.2 Product Introduction .................................................................................. 3

1.3 Functions .................................................................................................. 3

2 Appearance ....................................................................................... 5

2.1 Dimensions ............................................................................................... 5

2.2 Components .............................................................................................. 6

3 Basic Functions ................................................................................. 7

3.1 Charging the Device ................................................................................... 7

3.1.1 Charging via the charging base ............................................................. 7

3.1.2 Charging via the USB interface ............................................................. 9

3.2 Power On and Off .................................................................................... 10

3.3 Interface Description ................................................................................. 11

3.4 Focus Lens .............................................................................................. 12

3.5 File Exporting ......................................................................................... 13

3.6 Upgrade .................................................................................................. 14

3.7 Operation ................................................................................................ 14

4 Main Configurations ....................................................................... 16

4.1 Temperature Measurement ........................................................................ 16

4.1.1 Thermometry Settings ........................................................................ 16

4.1.2 Thermometry Rule Configuration........................................................ 18

4.2 Network Configuration ............................................................................. 20

4.2.1 Wi-Fi Settings ................................................................................... 20

4.2.2 WLAN Hot Spot Settings ................................................................... 21

4.2.3 Bluetooth settings .............................................................................. 22

4.3 Storage Settings ....................................................................................... 22

4.3.1 Recording Settings ............................................................................ 23

4.3.2 Capturing Settings ................................................................ ............. 24

4.3.3 View recorded files ............................................................................ 25

4.4 Image Configuration ................................................................................ 25

4.4.1 Temperature Difference/Range............................................................ 25

4.4.2 Palettes Settings ................................................................................ 27

4.4.3 Thermal/Optical Configuration ........................................................... 28

4.5 Alarm Configuration ................................................................................ 28

4.6 Other Configurations ................................................................................ 30

4.6.1 Digital Zoom .................................................................................... 30

4.6.2 LED Light Supplement ...................................................................... 30

4.6.3 Laser Settings ................................................................................... 30

viii

Handheld Thermography Camera · User Manual

4.6.4 Client Software ................................................................................. 30

5 System Settings ............................................................................... 32

5.1 Unit Settings ........................................................................................... 32

5.2 Display Settings....................................................................................... 32

5.3 Auto Power-off Duration Settings .............................................................. 33

5.4 Device Initialization ................................................................................. 33

5.5 Device Information .................................................................................. 33

6 Appendix ........................................................................................ 34

6.1 Common Material Emissivity Reference .................................................... 34

6.2 Frequently Asked Questions (FAQ) ........................................................... 35

1

Handheld Thermography Camera · User Manual

About This Manual

This document introduces the way to perform and maintain the Handheld

Thermography Camera.

It covers what is Handheld Thermography Camera, how to set up alarm and rules for
Handheld Thermography Camera, concrete functions and descriptions of the camera. It
shows you how to record and capture with the camera, and export the files. It also advices
basic handling methods of frequently happened errors.

Overview of Contents

This document contains the following chapters, and appendixes:

Chapter 1 Overview introduces the handheld Thermography camera, including
the box content, product introduction, and major functions.

Chapter 2 Appearance shows the dimensions of the camera and explains the
functions of all components.

Chapter 3 Basic Functions describes how to charge, power on and off the camera,
focus the thermal lens, and export file. It also tells the lens assembling procedure
and how to operate it with touch-screen and by buttons.

Chapter 4 Main Configurations shows you the way to measure temperature and
set temperature alarms. Besides, it describes how to record videos and capture
snapshots. You can do Wi-Fi settings, palettes selection, temperature section
settings, digital zoom, LED light control, and remote control via client software
according to this chapter.

Chapter 5 System Settings indicates the unit settings, display settings, and device
initialization, etc.

Chapter 6 Appendix lists the emissivity value of common materials for reference
and the frequently asked questions.

2

Handheld Thermography Camera (×1)

Charging Base (×1)

Box (×1)

power Adapter (x1)

USB Cable (×1)

Battery (x1)

1 Overview

1.1 Box Content

See the table below for the box content.

Handheld Thermography Camera · User Manual

3

DISK

User Manual (×1)

Disk (×1)

Note: The Handheld Thermography Camera includes one lens cover, one battery
and one SD card.

1.2 Product Introduction

The handheld Thermography camera is a camera with both optical
images and thermal images. It can do thermometry, video recording,
snapshot capturing, alarm, and it can connect to Wi-Fi, Hotspot and
Bluetooth. The built-in high-sensitivity IR detector and
high-performance sensor detects the variation of temperature and
measure the real-time temperature.

The Picture-in-picture technique of the Thermography camera and the
fusion of optical view and thermal view, enhances the details of the
images display. It supports multiple palettes and alarm types. When the
detected temperature in the scene does not match with the alarm rules,
the device alarms by color of the palette mode automatically. It helps the
users to find the risky part and lower your property loss. The device
supports Wi-Fi connection, live viewing, recording, and capturing, etc.

Handheld Thermography Camera · User Manual

1.3 Functions

The handheld Thermography camera is easy to use, and adopts
ergonomic design. It is widely applied to substations, electricity
prevention detection of companies, abnormal circuit temperature
detection in industry field, and reconnaissance survey of construction
field.

Thermometry

Device detects the real-time temperature, and display it on the screen.
Thermometry Range: -20 °C to 550 °C (-4 °F to 1022 °F)
Thermometry Accuracy: Max (±2 °C, ±2%)

4

Handheld Thermography Camera · User Manual

Storage

Device is equipped with memory module to store recorded videos,
captured snapshots, and important data.

Fusion

Device can display fusion of thermal view and optical view.

Palette and Alarm

Device supports multiple palettes, and you can set the palette mode
according to the alarm function

Wi-Fi Function

Device can be connected to Wi-Fi. You can connect the device via Wi-Fi
hot spot, and you can view live view, capture, and recording, etc.

Digital Zoom

Device supports 1×, 2× and 4× digital zoom.

LED Light:

LED light supplement makes the device a torch in required scenarios.

Laser Light Supplement:

Long-distance laser light supplement.

5

244mm (9.6'')

100mm (3.94'')

104mm (4.1'')

2 Appearance

2.1 Dimensions

Handheld Thermography Camera · User Manual

6

Touch Screen

LED Indicator

Audio

Loudspeaker

ON/OFF

Laser

Lens Sheet

Back

Navigation

USB

Interface
SD Slot

LED Light

Supplement

Lens Cover

Laser

Optical Lens

Battery

Focus Knob

Thermal

Lens

Tripod

Interface

Trigger

Laser Button

Hold the Laser button to turn on laser, and
release the button to turn off laser.

Navigation Button

Menu Button:

- Press the ▽, △, ▷, and ◁ button to select

parameters.

- Press the OK button to confirm.

Non-Menu Button:

- Press the △ button to turn on/off the LED

light supplement.

- Hold the ▽ button to digital zoom.

Lens Sheet Button

Cover the lens to perform the correction.

Back Button

Exit the menu or return to previous menu.

Focus Knob

Adjust lens focal length, refer to 3.4 Focus Lens

2.2 Components

Handheld Thermography Camera · User Manual