Digital Signage Quick Start Guide
i
TABLE OF CONTENTS
Chapter 1 Product Introduction .................................................................................................. 1
Chapter 2 Typical Application ..................................................................................................... 2
Chapter 3 Activation ................................................................................................................... 4
3.1 Activation for Scene One .......................................................................................................... 4
3.1.1 Activate on the Client ...................................................................................................... 4
3.1.2 Activate on the Terminal ................................................................................................. 5
3.1.3 Reset Password on the Client .......................................................................................... 6
3.2 Activation for Scene Two .......................................................................................................... 6
3.2.1 Activate on the Client ...................................................................................................... 6
3.2.2 Activate on the Terminal ................................................................................................. 7
Chapter 4 Registration ................................................................................................................ 8
4.1 Register Terminals for Scene One ............................................................................................ 8
4.1.1 Register on the Client ...................................................................................................... 8
4.1.2 Register on the Terminal ................................................................................................. 9
4.2 Register Terminals for Scene Two .......................................................................................... 10
4.2.1 Register on the Client .................................................................................................... 10
4.2.2 Register on the Terminal ............................................................................................... 12
Chapter 5 Terminal Software .................................................................................................... 13
Chapter 6 Remote Control Operations ...................................................................................... 15
6.1 Remote Control One............................................................................................................... 15
6.1.1 Functions of Remote Control Keys ................................................................................ 15
6.1.2 Operation of Remote Control ........................................................................................ 16
6.2 Remote Control Two .............................................................................................................. 16
6.2.1 Functions of Remote Control Keys ................................................................................ 17
6.2.2 Remote Control Mode................................................................................................... 17
6.2.3 Bind a Remote Control to a Terminal ............................................................................ 17
6.2.4 Unbind a Remote Control from a Terminal ................................................................... 18
Digital Signage Quick Start Guide
ii
Quick Start Guide
COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Information Release System.
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Digital Signage Quick Start Guide
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at
his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment should be installed and operated with a minimum distance 20 cm between the
radiator and your body.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentation
for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
iii
Digital Signage Quick Start Guide
iv
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
Digital Signage Quick Start Guide
1
Chapter 1 Product Introduction
Digital signage (hereinafter referred to as the terminal) displays are used to broadcast information,
release news, and advertise products, etc, working together with other related products, such as
information release servers and information release system, or the digital signage lite. Digital
signage displays are divided into two types according to the appearance: wall-mounted displays
and standing displays, which are widely applied to industries such as entertainment, finance, and
transportation. The adapted display connected to the is equivalent to the digital signage. The
following instructions are subject to the digital signage.
Digital Signage Quick Start Guide
2
Chapter 2 Typical Application
This chapter describes two typical application scenes for your reference. The two scenes are
different and require different configuration of your terminals. Please strictly follow the operation
instructions described in the following sections.
Refer to the following table for the detailed description of the scene 1.
Table 2-1 Scene 1 Description
Server: Information Release Server (DS-D60S-B)
Client: Information Release System Client
Terminal: Digital Signage
Multiple users are allowed for the server.
Access the server through the client.
Manage terminals through the server.
Upload materials to the server.
Edit programs.
Create and schedules to terminals.
Digital Signage Quick Start Guide
3
Refer to the following table for the detailed description of the scene2.
Table 2-2 Scene 2 Description
Client: Digital Signage Lite
Terminal: Digital Signage
Only one user is allowed for the client.
Manage terminals on the client.
Edit programs on the client.
Create and schedules to terminals.
Client
DS-D60C-B
Wall-mounted Digital
Signage
Standing Digital
Signage
DS-D50 Series
Monitor
DS-D20 Series
LCD Video Wall
DS-D40 Series
LED Video Wall