Page 1
Dashcam
User Manual
Download App
(iOS User)
Download App
(Android User)
Page 2
A
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device , pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
1
Page 3
A
Regulatory Information
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and
comply therefore with the applicable harmonized
European standards listed under the RE Directive
2014/53/EU, the EMC Directive 2014/30/EU, the
LVD Directive 2014/35/EU, the RoHS Directive
2011/65/EU
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see: www.
recyclethis.info
2
Page 4
A
Regulatory Information
The power supply must conform to LPS. The
recommended adaptor model is C10, whose
manufacturer is Dongguan NB Power Electronic
Limited. Use this kind of adaptor, and do not
change the adaptor randomly.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitation
est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce
3
Page 5
A
Regulatory Information
potential radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
Conformément à la réglementation d'Industrie Canada, le présent
émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique à l'intention
des autres utilisateurs, il faut choisir le type d'antenne et son gain
de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.)
ne dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
Cet équipement doit être installé et utilisé à une distance
minimale de 20 cm entre le radiateur et votre corps.
4
Page 6
B Packing List
•Camera × 1 •Cigarette Lighter × 1
•Electrostatic
Protective Film x2
You should connect the bracket and the dachcam by yourself.
•User Manual
× 1
•Power Cord × 1
5
Page 7
C
Camera Description
•FrontView
•BracketConnector
Screen
•
Micro SD Card Slot
•RearView
•ReservedInterface
•Loudspeaker
•SolidBlue:Thedashcamisrecording.
•Flashingred:Recodingisabnormal.CheckthemicroSDcard.
•Lens
•MIC
6
•MicroUSBInterface
•PowerSwitch/
Status Indicator
Page 8
Installation
D
Paste the
electrostatic
protective film.
5
》
7
Page 9
Mobile Phone Connection
E
Scan the QR code to download the HikDashcam app.
<
Scan QR Code
For iOS User For Android User
Add the dashcam in app by connecting
with its Wi-Fi.
1. Run the HikDashcam app.
2. In Wi-Fi list, select the Wi-Fi name
of target dashcam and enter Wi-Fi
password to build connection.
Dashcam Wi-Fi default parameters:
•Wi-Fi name: HIKVISION-XXXX (XXXX refers to the last four
characters of verification code.)
•Wi-Fi password: 1234567890
8
Page 10
Operation
F
Power on and Power off
1. Insert the cigarette lighter into the receptacle in automobile.
2. The dashcam powers on once the automobile starts up and
powers off once the automobile flameouts.
For automobiles with constant electric power supply, pulll the
cigarette lighter out of the receptacle to power off dashcam.
Recording
The dashcam starts recording automatically after inserting Micro
SD card.
Two recording types are provided: Normal Recording ( ) and
Emergency Recording ( ).
Wi-Fi
•SlidedownwardsandtaptheWi-FiswitchtoenableWi-Fi.
•TapSystem -> Wi-Fi to enable Wi-Fi.
The default Wi-Fi password is 1234567890
9
Page 11
Operation
F
Playback
Tap Photo on the main menu to view photos and playing
recordings.
Date and Time
•TapSystem -> Date on the main menu to set the date.
•TapSystem -> Time on the main menu to set the time.
Screen Saver
Tap System -> Screen Saver on the main menu to set the screen
saver duration.
Others
•System: you can format Micro SD card, set the sensitivity, restore
defaults, and so on.
•Video: you can set the video standard, resolution, and recording
duration, and so on.
10
Page 12
H Preventions and Cautionary Tips
Tips for Dashcam
•Operate the dashcam in accordance with the local regulations
and laws.
•Save the user manual properly for future reference.
•To ensure data is safe and stable, install a micro SD card bought
from formal channel. It is recommended to use a high-speed
micro SD card of class 10 and above.
•To protect micro SD card from damage, shut down the dashcam
before installing and uninstalling micro SD card.
•In case the dashcam is directly connected with the automobile
power system, you are recommended to power off the dashcam
when the automobile is off.
•Working temperature: [-20 °C, +70 °C] ([-4 °F, 158 °F]). To protect
the dashcam, do not use it in high-humidity and high-dust density
environment and keep all liquids away from it.
•The manual is subject to dashcam update.
11
Page 13
I
Trouble Shooting
Trouble Solution
The dashcam drops
easily.
•Clean the glass before installation.
Starting dashcam
failed.
The dashcam powers
off frequently.
Recording is abnormal,
and recording
indicator is unlit.
Recorded videos are
fuzzy.
•Ensure the automobile started
normally.
•If no indicator is lighting, reconnect
the the vehicle charger.
•Ensure the power cord is well.
•Ensure the connection between the
dashcam and the power cord is well.
•Ensure the dashcam started normally.
•Ensure micro SD card is installed.
•Check micro SD card status, e.g., its
format and lifespan. If it is not well,
replace it with a good one.
•Tear off the proof film on lens.
•Clean the lens and glass.
12
Page 14
Trouble Shooting
I
Trouble Solution
Audio is not recorded
with the video.
Connecting the
dashcam via App
failed.
Playing the video via
App failed.
Failed to detect the
micro SD card when
connecting the
dashcam and your
computer with the
power cord.
It takes a long time to
connect the dashcam
Wi-Fi.
•Enable Tape When Recording in App.
•Ensure the App is well installed.
•Restart the App and the dashcam.
The trouble may be relevant with the
moble phone player or system.
Insert the micro SD card into your
computer and play the videos.
The dashcam does not support data
transmission. And the power cord is
only for charging. If you need to transfer
data, take out the SD card and connect
it to your computer.
•It may be caused by the interference
of the surrounding Wi-Fi signals. You
can operate the dashcamm in an
environment with less interference.
•Close unnecessary programs in
your mobile phone to release some
resources for the dashcam App.
13
UD07186B
Loading...