Hangzhou Gubei Electronics Technology RMMINI3 RM User Manual
Add Device
4:21 PM
BELL
Control panel
Back
SP
RM
Sensor
NEW
Living room scene
Device list
客厅空调
Smart plug
b4:42:0d:10:21:f4
Smart plug
04:02:58:10:28:44
RM mini 3
a4:62:07:18:91:22
A1
f4:22:0d:a3:51:f8
NEW
②
New device Add new device;
Local Connect device with the Wi-Fi smart phone
connected;
Remote Control online device by remote;
Offline Device is offline and it is out of control.
Please check the network connection.
①
Back
TV
Choose a remote template
Air conditioner
Set Top Box
TC
100%
Add remote
Add scene
Add device
Device list
Add remote
Audio
Gesture Control
User-Defined
①
Please enter
appliance brand
or panel code to
perform search
Remote panel
icon
Instruction of LED indicatoror
Blue indicator flashes quickly:
Waiting for configuration (device is under factory state
or reset). Under this circumstance, you can tap ‘Add
device’ in APP and it guides you to finish the
configuration.
Blue indicator flashes slowly:
Network is down, power supply is down and then
recovers, or during the configuration process.
White indicator flashes once:
Transmitting infrared signal (it occurs when learning the
infrared codes or controlling appliance).
Note
Do not use non-ASCII characters in Wi-Fi name or
password. It may cause configuration failure. The device
supports Wi-Fi of 2.4G 802.11 b/g/n only.
Please place the device on open place. Please point
remote to the top of the device during learning and we
suggest the distance is less than 1m.
Please configure the device according the user guide. If
you encounter problems, please contact our
authorized distributors or our support team.
All the technical details are subjected to the actual
product performance.
FCC Radiation Exposure Statement
FCC ID: 2ACDZ-RMMINI3-RM
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between
the radiator and your body.
FCC WARNING:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference, and This device
must accept any interference received, including interference that
may cause undesired operation.
NOTE : Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Specifications
Product name : Universal Remote
Model : RM mini 3
Input Power : 5V DC 1A ( Micro USB )
Infrared Frequency : 38K
Working Temperature : 0 ~ 50°C
Working Humidity : ≤ 85%
Wi-Fi Frequency : 2.4GHz 802.11b/g/n
Standby Power : ≤ 0.88W
Infrared Direction : Multiple-direction infrared
Infrared Range : ≤ 8m ( Typical )
Size : 55 x 55 x 64.5mm
Net Weight : 95.5g
Hangzhou Gubei Electronics Technology Co., Ltd.
Address: Room 106, No.611 Jianghong Road, Binjiang
District, Hangzhou, Zhejiang, China( 310052 )
Universal Remote
User Guide
Facebook Twitter Linkedin
Hotline
Website: www.ibroadlink.com
Service: support@ibroadlink.com
Package Content
After opening package, please check contents as below
User guide
RM mini 3
x 1
USB cable
x 1
Reset button
Power input
(Mirco USB)
LED indicator
Front Back
User guide
x 1
Step
1
Install APP
e-control
Scan the QR code on package to download and install
APP, or visit http://upgrade.broadlink.com.cn/getapp/
from web browser on phone to download APP manually.
Step
2
User Guide
Connect to power
①
Configuration mode
Indicator flashes quickly
about 2-3 times/sec
Connect smart
②
phone to Wi-Fi
Open the APP
③
Connect to power and set RM mini 3 to config mode
(indicator flashes quickly).
Please choose the proper adapter which output power
is 5V DC and ≥ 1A for RM mini 3.
Please place the device on open place. Please point the
remote to the top of the device during learning, and we
suggest the distance from the device to remote should
be less than 1m.
RM mini 3
Reset device
USB power
source
Wi-Fi routerSmart phone
Step
3
Add device
4:21 PM
BELL
Add device
Back
Enter Wi-Fi password to perform
quick configuration
Wi-Fi SSID your
smart phone connected
BroadLink
Please enter Wi-Fi password
Tap to enter Wi-Fi password
Configure
If configuration failed, please reset the device and
re-configure
Reset device: Long press on reset button with a slim
needle for more than 5s until the indicator flashes
quickly.
100%
AP config
Step
Main menu
Scene icon
Remote panel
shortcut
BELL
Living room scene
What do you want to do to this device?
1
Tap to add remote control panel;
2
Tap to add scene;
3
Tap to add device;
4
Tap to view added devices.
4
Control panel
4:21 PM
Control panel
Long press
100%
Add remote
Add scene
Add device
Device list
Delete
Cancel
Function menu
1
2
3
4
Device shortcut
A1Aircon TV Smart Plug
Loading...