Hangzhou Gubei Electronics Technology E REMOTE Users manual

e-Remote Wi-Fi Universal Remote

Contain

RM-Pro/RM-Home

e-Remote

USB LineAC/DC Adapter

Wi-Fi Universal Remote

Yellow

Indicator Light

Wi-Fi Light

Front Right Side

Reset

Temp SensorBlue

Micro USB

5*8 hour Servicer

[phone]

Service hour: 09:00-18:00

Hangzhou Gubei Electronics Technology Co.,Ltd

Add: Room 106, No.1 Building, No.611 Jianghong Road,

Binjiang District, Hangzhou, Zhejiang , China(310052)

User Guide

Download Free BroadLink APP e-Control Configure

e-Control

Scan the QR code from packing box or

A:

user manual to download and install the
APP.

Download the free BroadLink App from

B:

the Apple App store or Google Play
Store by searching for “e-Control” or
“BroadLink”.

Visit at www.broadlink.com.cn by using

C:

your smartphone internet browser,and
press “Download App” to download and
install ( Android phone automatically
download and install, iOS phone will skip
to AppStore).

Plug the RM’s power supply into a power outlet, and keep RM in Wi-Fi coverage, then connect
your smartphone to Wi-Fi.
Ensure the Wi-Fi light on RM is flashing rapidly at about 5-6 times per sec..
Otherwise, please press reset button until the blue light is fast flashing.

Reset

Router

Plug in and keep blue
light fast flashing

Smart Phone

FAQ

Wi-Fi light on the device is flashing

The Wi-Fi light is flashing quickly

If the Wi-Fi light is flashing quickly, it means that the BroadLink device is in the original factory
state.
It is ready for you to start configuring it.

The Wi-Fi light is flashing slowly

If the Wi-Fi light flashes slowly for 4 flashes and then stops flashing for 1 sec. and then repeats
this cycle, it means the BroadLink device is waiting for you to configure it. Please press at the
upper right icon to start the configuration.

The Wi-Fi light is flashing very slowly

If the Wi-Fi Light is flashing 1 time every 3 sec. indicates that the device has not connected to
the Wi-Fi.Check your Wi-Fi is running .

The Wi-Fi light is flashing slowly and continuously

If the Wi-Fi light keeps on flashing continuously at 1 flash per sec., it means the configuration
has failed, please reset the device and configure again.

How to protect my device and prevent others finding it?

Only connect to your home Wi-Fi, and then can find your device. Once this is done you can
lock your device at “Device Info” page.

Note

Please refer to User Manual in BroadLink APP for detail.
1-Year Limited Warranty.

Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.