Hangzhou Great Star 8110 User Manual

1200LM RECHARGEABLE WORK LIGHT
PRODUCT IMAGE
WITH BLUETOOTH SPEAKER
Vendor Stock Number: 8110
Questions, problems, missing parts? Before returning to the store, call GreatStar Customer Service 9AM-4PM CST, M-F Call: 479-802-3580 or Email: Help@greatstar-us.com
USB wall adapter not included. This work light is compatible with Hyper Tough tripod, vendor stock #7059. For indoor use and/or dry place only.
F
G
E
CONTENT
PART DESCRIPTION QUANTITY
LED Lights
A
Charging Cable
B
On/Off Button
C
Handle
D
Input/Charging Port
E
Output/USB Port
F
Charging Indicator Light
G
1
1
1
1
1
1
3
1 2
WARNING
• Read all instructions before using this work light.
• This product is not waterproof.
• Never modify the product or any of its parts as this may result in serious personal injury.
• This work light is not intended for use nor safe to use in potentially dangerous locations such as places with explosives or
flammable atmospheres.
• Never look directly into the light sources/LED chips as they are extremely bright and may cause eye damage from prolonged exposure.
• Place light away from any heat source.
• The glass may get hot during use. To avoid the risk of burns, do not
touch glass.
• Do not place anything on top of the glass during or after each use to prevent potential fire.
• Never use this work light if the clear protective glass is damaged/removed.
• Do not wash light with water or allow water to get inside light.
• Keep fixture away from children.
Store light in temperatures below 100◦ F.
• Keep work light dry, clean and free from oil and grease.
• Do not leave this lithium-ion battery powered unit in direct sunlight.
SAFETY INFORMATION
• Never use this work light around flammable liquids such as gasoline.
• To avoid electrical shock, do not put work light in water or any other liquids.
• Do not store work light where it can easily fall into tub/sink.
• Do not handle this work light or try to plug this in while your hands are damp
or wet.
• Do not operate this work light after it has malfunctioned.
• Always make sure the power source conforms to the rating on this fixture.
Hence, this work light must always be used in accordance with all electrical and safety codes and ordinances, including the most recent National Electric Code (NEC) and with the Occupational Safety and Health Act (OSHA) Volume 1 on General Industry Standards and interpretations.
• Do not use or permit use of work light in beds or sleeping bags as this fixture
can melt fabric and may result in burn injury.
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experience radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
ELECTRICAL INFORMATION
• The charging cable is compatible with any USB wall adapter that has an output of 5V/2A.
• This fixture is only for 100-240V~50/60HZ electrical outlet.
• To ensure proper charging, use the enclosed USB charging cable.
• Pull by plug rather than cable when disconnecting work light to avoid damage to electric plug and cable.
3 4
SPECIFICATIONS
Product Weight
Product Width
Product Depth
Product Height
Rated Voltage
Power
1.6LB
9.4"
1.9"
6.1”
Input/Output: 5V, 2A
12W
Charging Cable
Mode
Run Time
Recharge Time
Lumen Output
Impact Resistance
OPERATING WORK LIGHT
Fully charge the light before turning on.
• Battery charging indicator is flash when charging and is green when fully charged.
• Battery charging indicator is blue when USB output is used to charge other devices.
• When USB port is in use, work light cannot be used or charged.
• Work light cannot be used while charging.
• Work light can be on low mode while charging,speaker also can work(not suggested use this funcion)
• When the battery is completely drained, the work light will take about 4-5 hours to fully charge.
UNFOLDING WORK LIGHT
• This work light is fully assembled out of the box.
• Hold on to an edge of the work light with one hand while the other hand pushes the handle (D) outward to the desired position.
40"
High/Low/Flash
High: 2hrs Low: 4hrs
4-5hrs
High: 1200LM Low: 360LM
3'
FOLDING WORK LIGHT
• Push handle (D) downward to return to folded position.
D
CARE AND CLEANING
• Always make sure the work light is unplugged and cooled down prior to cleaning and handling.
• Clean work light regularly with a damp cloth.
TROUBLESHOOTING
If the light does not work, check the following:
Fully charge work light before first use.
• Ensure the cord is properly plugged into the power source to charge the battery.
• The battery may be depleted, allow the work light to charge for about
4-5 hours.
• Make sure the work light is in the ON position.
WARRANTY
This work light is backed with a two-year limited warranty to the original
D
purchaser. This warranty covers against defects in material and workmanship under normal use. This warranty does not cover against abuse, improper use, failure to follow directions, neglect, ordinary wear and tear.
5 6
Loading...