LED Lamp
FCC ID: 2AJ3WEBESHW06
Model Name: EBE-SHW06
Manufacture:Hangzhou Eboylamp Electronics Co., Ltd.
ITEM:
EBE-SHW0
BA
SE:
WER:
PO
LUMINOUS FLUX:
C
OLOR TEMP:
AN:
LIFE SP
BEAM ANGLE:
DIMMABLE:
DIMENSION:
BR30
7.2-8.8
650
110
96
135
Step 1: Registration and login "smart life" APP.
If you don't have the account of “Smart life” APP,register an account or sign in with
cellphone number + verification code.This page describes the Registration process.
1.Tap“Register”in the upper right（pic 1）
2.The system automatically determines your country / area.You can also select your
country code by yourself. Enter the cellphone number/E-mail and tap “Next” （pic 2）
3.If you enter the mobile cellphone number，enter the verification code in the
message（pic 3），and enter the password，tap"Confirm" to finish your registration.
4.If you enter the E-mail，enter the password （pic 4），tap” Confirm" to finish
your registration.
Make sure your phone is connected to WiFi in your home. Click "+" in the upper right
corner of the homepage and select "Lighting devices" from the device type.
Step 2: Connect with the power supply, Make sure the WiFi smart bulb is
standby(the white light flash rapidly ) Select confirm indicator rapidly blinks.
Step 3: Enter your WiFi password for your phone and click "Confirm" to enter the
page of the search device.
Step 4: Enter the device page, then complete the configuration
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Loading...