Hangzhou Eboylamp Electronics EBEQPZ14 User Manual
Smart Life
Instruction Manual of Smart Lamp
Model name: EBE-QPZ14
FCC ID: 2AJ3WEBEQPZ14
NO.1
Download and install Smart Life App
Use your phone to scan the QR code below or search “Smart Life” in
application market to download and install the App
NO.2
Register/Login/Request password
Register
If you don't have the account of Smart Life APP,register an account or sign in with cellphone number + verification
code.This page describes the Registration process.
1.Tap“Register”in the upper right（pic 1）
2.The system automatically determines your country / area.You can also select your country code by yourself.
Enter the cellphone number/E-mail and tap “Next” （pic 2）
3.If you enter the mobile cellphone number，enter the verification code in the message（pic 3），and enter the
password，tap"Confirm" to finish your registration.
4.If you enter the E-mail，enter the password （pic 4），tap”Confirm" to finish your registration.
Pic1 Pic2 Pic3 Pic4
NO.2
Register/Login/Request password
Account+password sign-in
1.The system will automatically determine your country /
area or you could select manually
2.Enter your registered cellphone number or email and
password, sign in to the system
Sign in with social media account
Sign-in with QQ or Wechat is supported in China. Sign-in
with Facebook or Twitter is supported overseas.
NO.2
Register/Login/Request password
Forgot password
If you forgot your account of Smart Life APP，you can reset the account password by “Request password”
1.Tap“Forgot password”，as shown in the picture 1
2.The system automatically determines your country / area.You can also select your country code by
yourself.Enter the cellphone number/E-mail and tap “Next”,as shown in the picture 2
3.Enter the verification code in the message/E-mail , as shown in the picture 3，and enter the new password
，tap"Confirm" to finish.
Pic 1 Pic 2 Pic 3
NO.3
Add device
1.Go to the App，on“Devices(Prepare)”，tap“+”in the
upper right of this page.to add device，as shown in
the picture
2.For quick connect mode, please make sure the
device’s instructor light quickly flashes,tap”nest
step”and go on to the next step
Remarks:
App provides two methods of network
connection: EZ mode and AP mode. Please use
default EZ mode. If it failed, please tap “AP
mode” in the upper right to try connecting again.
NO.3
Make sure device is under the status awaiting to be connected. If not, please reset the device by following the
methods below: Long press reset button for 5 seconds, indicator light is rapidly flashing (3 times/per second). It
indicates that device is reset and under Ez mode.
Remarks: If indicator light is slowly flashing (Once per 2s), it indicates that device is under AP mode. Long press
reset button for 5 seconds to switch the modes.
Add device
NO.3
Add device
Next step: confirm the WiFi for device connection and
enter the password. Tap “Next and start connecting
device. (remarks: only support 2.4G Wi-Fi network), as
shown in the picture.
Remarks:
The purpose of this step is: tell the device through which
router for Wi-Fi network connection. After successful setup,
the device will automatically connect to the Wi-Fi network
and realize receiving operation command and data report
remotely
Loading...