Hangshi Technology HB030 1 User Manual

Bluetooth keyboard Manual

Bluetooth Specification

Broadcom 3.0 chip

Dimensions

247x150x6.5mm

Operating Range

Up to 10 meters

Modulation System

GFSK

Stand-by time

60 days

Charge time

4 hours

Uninterrupted Work Time

44 hours

Lithium Battery Capacity

110 mAh

Lithium Battery Life

3 years

Key Life

3 million clicks

CAPS

Lights blue when CAPS-lock is active

Will flash blue (3min. long) after pressing the "Connect" button
until a BT connection is established. It disappears when
connected.

Charge

Lights red when the keyboard is charging.
Turns off when the battery is fully charged.
Flashes red, when the battery is weak and should be charged.

Power

Lights up blue for about 4 sec when being turned on.

Back

Home

Lock

Copy

Paste

Cut

Select All

Mute

Volume down

Volume up

Play/paus
e

Previous track

Package Contents

1.Ultra-slim Bluetooth keyboard

2.Micro-USB charging cable

3.User manual

Specifications

Led Display

Function Keys

Next track

Menu

Web browser

Decrease

Increase

Virtual keyboard

Calculator

Desktop

Taskbar

Applicatio
n Menu

switch
Language

map

voice
search

Play

Settings

Email

SPECIAL NOTE:

1.This keyboard doesn't support the Nokia Mobile.

2. For Android users: The Caps Lock indicator may not light, but will still
function normally.

Pairing keyboard method

Pairing with Tablets ,Laptops,Cellphones

Step 1: Turn on the keyboard’s power button .The blue status light will light for 4

seconds and then shut off.
Step 2: Press the connect button, the Bluetooth indicator light will be blinking
blue.
Step 3: Go to your “SETTINGS”screen on your tablets with Bluetooth –enabled
device, activate its Bluetooth function and search for the keyboard device.
Step 4: Once the “Bluetooth 3.0 keyboard” has been found, select its name to
connect.
Step 5: Enter the password code as displayed on the screen.
Step 6: Once the Bluetooth keyboard has successfully connected to your device,
the Bluetooth indicator will turn off.

SPECIAL NOTE:

1. Only one device can be actively paired at one time.

2. For other Bluetooth enabled device, please verify the Bluetooth
Standard&compatibility before attempting to connect to the keyboard.

3. After pairing for the first time, your device will connect to the keyboard
automatically when opening the keyboard.

4. In case of connect failure, delete the pairing record from your device, and
try the above procedures again.

Power Saving Mode

The keyboard will enter sleep mode after being idle for 15 minutes.To active it,
press any key and wait for 3 seconds.