Hanchett Entry Systems RF0010 User Manual

ACS Report Number: 10-0242.W06.12.A

Manufacturer: Hanchett Entry Systems, Inc

Certification Exhibit
FCC ID: VC3-RF0010
IC: 7160A-RF0010
FCC Rule Part: 15.209
Model: RF0010
Manual
5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598
Installation Instructions RF0010
Prox Module
HES, Inc. 22630 N. 17th Ave. Phoenix, AZ 85027 800-626-7590
1
Prox Module
2
Dielectric Grease (for humid applications)
3
#6-32 Module Mounting Screws (for optional strike mount)
4
Reader/Antenna Body
5
Reader/Antenna Mounting Screws
6
Reader/Antenna Cover
7
24” Cable (connecting reader/antenna and strike)
8
2 pin DPS & LBM Pigtail Connector
2
Dielectric Grease
1
10
9
4 pin 12V Strike Power Pigtail
10
8 pin Connector (Data Module) Prox Pigtail
11
Door Position Sensor (DPS)
9
8
Access Control System
Control Panel and Power Supply
(By others)
6
Wiring Diagram
8 Pin Connector (Data Module)
Red (+) Board Power Black ( ) Board Power Green Data 0 White Data 1 Yellow LED/Buzzer Blue Not Used Orange Not Used Brown Not Used
-
11
The Prox Module can either be supported by the electrical connection to the Electric Strike,
7
or by mounting it directly to the back of several HES Electric Strikes using the #6-32 Module Mounting Screws. Do not attempt to support the Prox Module with the 24” Antenna Cable.
To Electric Strike
4
5
3
2 pin Connector (Strike Module)
Tan Common Pink Door Closed and Latch Engaged
2 Pin Connector (Door Position Switch)
Wire plugs into Hybrid Electric Strike
4 Pin Connector (12V Strike Power)
Red (12VDC +) Strike Power Black (−) Strike Power
OR
4 Pin Connector (24V Strike Power)
Violet (24VDC +) Strike Power
(−) Strike Power
Black
Loading...
+ 1 hidden pages