Service Parts ................................................................
15
15
15
16
16
17
18
2
Safety Information
□ Read and save these instructions.
□ To reduce the risk of electric shock, ensure electricity has
been turned off at the circuit breaker or fuse box before
beginning.
□ All wiring must be in accordance with the National Electrical
Code “ANSI/NFPA 70-1999” and local electrical codes.
Electrical installation should be performed by a qualified
licensed electrician.
□ The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of 35
lbs. Use only UL-listed outlet boxes marked “FOR FAN
SUPPORT.”
□ The fan must be mounted with a minimum of 7 ft. clearance
from the trailing edge of the blades to the floor.
□ Avoid placing objects in the path of the blades.
□ To avoid personal injury or damage to the fan and other items,
be cautious when working around or cleaning the fan.
□ Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
WARNING: To reduce the risk of fire or electronic shock,
this fan must only use a UC7067RC solid-state speed control
with a UC9050T wall control.
WARNING: To reduce the risk of personal injury, do not
bend the blade arms (also referred to as flanges) when
installing the brackets, balancing the blades, or cleaning the
fan.
WARNING: Do not insert foreign objects between rotating
fan blades.
WARNING:To reduce the risk of fire, electric shock, or
personal injury, mount the fan to the outlet box marked
acceptable for fan support using the screws provided with the
outlet box.
□ After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding conductor
on one side of the outlet box and ungrounded conductor on
the other side of the outlet box.
□ All setscrews must be checked and retightened where
necessary before installation.
3HAMPTONBAY.COM
Please contact 1-800-527-0998 for further assistance.
SPECIFICATIONS
TOOLS REQUIRED
Warranty
Fan size
Watts
RPM
CFM
Speed
Volts
Amps
N.W.
G.W.
C.F.
We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period
of lifetime after the date of purchase by the original purchaser. We also warrant all other fan parts, excluding any glass or acrylic blades,
to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of
purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or
superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All
costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions, this warranty does not cover
any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful
life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. We hereby disclaim
any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by
law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty.
Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall
not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as
may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above
exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from
state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty
must be paid by the customer.
Contact the Customer Service Team at 1-800-527-0998 or visit www.hamptonbay.com.
Pre-InstallationPre-Installation
SPECIFICATIONS
Fan size
44 in.
TOOLS REQUIRED
Speed
Low
Medium
High
NOTE: These are approximate measures. They do not
include amps and wattage used by the light kit.
Phillips
screwdriver
Volts
120
Flat blade
screwdriver
Amps
0.26
0.38
0.40
Watts
9.9
27.9
48.3
RPM
82
162
226
Step
ladder
CFM
1322.14
2591.99
3851.73
8.05 kgs
(17.71 lbs)
Wire
stripper
N.W.
G.W.
9.11 kgs
(20.04 lbs)
C.F.
1.834 ft.
Electrical
Tape
4
Pre-Installation (continued)
HARDWARE INCLUDED
Part
Description
Quantity
HARDWARE INCLUDED
NOTE: Hardware shown to actual size unless noted
otherwise in the table below.
AA
BB
CC
Description
Part
AA
Blade attachment hardware (3/16 in. x 17mm screws and lock washer)
BB
Plastic wire nut
CC
Balance kit (not to scale)
DD
Mounting bracket screws (preassembled) (3/16 in. x 1/2 in. screws and lock washer)
EE
Remote control holder mounting screws
FF
Remote control holder plugs (preassembled)
GG
Blade support plates (not to scale)
HH
Mounting ring screws (preassembled) (5/32 in. x 8mm screws)
II
Light kit plate screws (preassembled) (5/32 in. x 8mm screws)
DD
EE
FF
Quantity
10
3
1
4
2
2
3
3
4
GG
HH
II
5HAMPTONBAY.COM
Please contact 1-800-527-0998 for further assistance.
PACKAGE CONTENTS
Part
Description
Pre-Installation (continued)
Part
Quantity
Quantity
Description
PACKAGE CONTENTS
A
B
G
HI
LOW
MED
H
OFF
Part
A
B
C
D
E
F
C
D
E
F
Description
Mounting bracket
Fan motor assembly
Blades
Light kit mounting plate
Light kit plate
Glass shade
Quantity
1
1
3
1
1
1
Part
G
H
I
J
K
I
J
K
Description
Receiver
Remote control
Remote control holder
100W halogen bulb
12V MN21/A23 battery
Quantity
1
1
1
1
1
6
Loading...
+ 13 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.