HAMPTON BAY HB-7830-02 Use And Care Manual
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this wireless mp3
doorbell kit. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
WIRELESS MP3 DOORBELL KIT
Questions, problems, missing parts?
Before returning to the store, call Hampton Bay Customer Service
8 a.m. - 5 p.m., CST, Monday - Friday
1-844-760-3644
HAMPTONBAY.COM
Illustrations may vary from actual unit.
Item #1001411382
Model #HB-7830-02
2
Table of Contents
Table of Contents .......................................2
Safety Information .....................................2
Warranty ....................................................2
3-Year Limited Warranty ........................2
Pre-Installation ..........................................3
Planning Installation ..............................3
Specications ........................................3
Tools Required .......................................3
Hardware Included .................................3
Package Contents ..................................4
Installation .................................................4
Operation ...................................................6
Care and Cleaning .....................................7
Troubleshooting .........................................7
Safety Information
PRECAUTIONS
Ƒ Please read and understand this entire manual
before attempting to assemble, install, or operate
this doorbell.
WARNING: To prevent possible SERIOUS INJURY or
DEATH never allow small children near batteries. If a
battery is swallowed, immediately notify a doctor.
WARNING: DO NOT mix old and new batteries. DO
NOT mix battery types - such as alkaline, heavy duty, and
rechargeable - in a single device. Battery leakage may occur.
WARNING: DO NOT DISPOSE OF BATTERIES IN FIRE.
BATTERIES MAY EXPLODE OR LEAK.
NOTE: The push button and doorbell come synced from
the factory. The range of the wireless doorbell can vary
with location, temperature, and battery condition.
This device complies with Part 15 of the FCC Rules and
RSS-210 of Industry Canada. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
The user is cautioned that changes or modications
not expressly approved by the party responsible for
regulatory compliance could void the user’s authority to
operate the equipment.
Warranty
3-YEAR LIMITED WARRANTY
WHAT IS COVERED
This product is guaranteed to be free of factory defective parts and workmanship for a period of 3 years from date
of purchase. Purchase receipt is required for all warranty claims.
WHAT IS NOT COVERED
This warranty does not include expendable items (such as light bulbs, batteries, etc.), repair service, adjustment
and calibration due to misuse, abuse or negligence. Unauthorized service or modication of the product or of any
furnished component will void this warranty in its entirety. This warranty does not include reimbursement for
inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty
is not extended to other equipment and components that a customer uses in conjunction with this product.
Contact the Customer Service Team at 1-844-760-3644 or visit www.hamptonbay.com.
3 HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Pre-Installation
PLANNING INSTALLATION
Before installing the wireless mp3 doorbell kit, ensure that all parts are present. Compare the parts with the
Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble,
install, or operate this wireless mp3 doorbell kit.
Estimated installation time: 15 minutes
SPECIFICATIONS
Doorbell Push button
Power requirements
3 “C” alkaline batteries (not included) Type A23 12V battery (included)
TOOLS REQUIRED
Phillips
screwdriver
Small athead
screwdriver
Drill
1/16 in.
(1.5 mm)
Drill bit
3/16 in.
(4.8 mm) Drill bit
Safety goggles
HARDWARE INCLUDED
NOTE: Hardware shown to actual size.
AA
BB
CC
DD
EE
FF
Part Description Quantity
AA Jumper 1
BB Screw – small 2
CC Screw – large 2
DD Wall anchor 2
EE Double-sided tape 1
FF USB cable (not to scale) 1
4
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Doorbell 1
B Push button 1
Installation
1
Installing the doorbell batteries
Ƒ Push the battery cover tab toward the battery
cover (1) and pull to remove.
Ƒ Install 3 alkaline “C”batteries (not included)
into the doorbell (A). Ensure the batteries are
oriented correctly.
Ƒ Replace the battery cover (1) on the back of the
doorbell(A).
NOTE: In typical use, alkaline batteries will last up to
one year.
2
Removing the battery tab
Ƒ Remove the back of the push button (B) by
pushing in the tab on the bottom with a small
screwdriver (not included).
Ƒ Remove the orange battery tab from the push
button (B).
A
B
B
1
A
5 HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Installation (continued)
3
Testing the push button and
doorbell
Ƒ Temporarily position the push button (B) and
doorbell (A) where they will be mounted.
Ƒ Press the push button (B) to verify the
doorbell(A) and push button (B) work properly.
Ƒ If the doorbell (A) does not sound, move the
doorbell (A) closer to the push button (B) and
test again.
NOTE: Do not permanently mount the push button until
the push button and doorbell are working properly.
4
Mounting the push button
Use either screws (BB) or double-sided tape (EE) to
mount the push button (B).
Ƒ To mount with screws (BB), remove the back of
the push button (B) by pushing in tab on bottom
with a small screwdriver. Place the push button
(B) back on the door jamb and mark the two
screw holes. Attach with screws (BB) and snap
on the front of the push button (B).
Ƒ When attaching the push button (B) with
double-sided tape (EE), remove paper from
both sides of the double-sided tape (EE) and
apply to a clean surface.
5
Mounting the doorbell
Use the large screws (CC) to mount the doorbell (A).
Ƒ Mark two level points 2.75 in. apart on the
mounting surface. Drill two 3/16 in. pilot holes
and insert the wall anchors (DD). Insert the
large screws (CC) into the wall anchors (DD)
leaving about 1/8 in. of the screw threads
exposed. Hang the doorbell (A) on the large
screws (CC) using the keyholes on the back of
the doorbell (A).
NOTE: This doorbell is designed to either hang vertically
or horizontally.
A
A
DD
CC
A
B
BB
Loading...