HAMPTON BAY HB-7614-02, HB-7612-02, HB-7621-02, HB-7618-02, HB-7615-02 Use And Care Manual

THANK YOU

We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this doorbell. We

strive to continually create quality products designed to enhance your home. Visit us online to see our full line of

products available for your home improvement needs. Thank you for choosing Hampton Bay!

USE AND CARE GUIDE

WIRELESS OR WIRED DOORBELL

Questions, problems, missing parts?

Before returning to the store, call Hampton Bay Customer Service

8 a.m. - 5 p.m., CST, Monday - Friday

1-844-760-3644

HAMPTONBAY.COM

Illustrations may vary from actual unit.

Item #1001407776

1001407811
1001411352
1001407817

Model #HB-7612-02

HB-7614-02
HB-7615-02
HB-7616-02

Item #1001407818

1001407820
1001407821
1001407823

Model #HB-7617-02

HB-7618-02
HB-7621-02
HB-7671-02

2

Table of Contents

Table of Contents .......................................2

Safety Information .....................................2

Warranty ....................................................2

3-Year Limited Warranty ........................2

Pre-Installation ..........................................3

Planning Installation ..............................3

Specications ........................................3

Tools Required .......................................3

Hardware Included .................................4

Package Contents ..................................4

Installation - Wired Doorbell ......................4

Installation - Wireless Doorbell ..................6

Operation ...................................................7

Tunes .........................................................8

Care and Cleaning .....................................8

Troubleshooting - Wired Doorbell ..............8

Troubleshooting - Wireless Doorbell ..........9

Safety Information

PRECAUTIONS

 Please read and understand this entire manual

before attempting to assemble, install, or operate
this doorbell.

 All electrical work must be in accordance with

national and local electrical codes. If in doubt,
consult a qualied electrician.

 For wired installations, this doorbell requires

a 16 volt AC, 10 watt or a 16 volt AC, 15 watt
transformer.

 For wireless only installations, this doorbell

requires 3 “C” alkaline batteries. Do NOT install
batteries if connecting the doorbell to transformer
wires.

 For proper hardwired doorbell operation, a diode

must be installed on the push button of the main
entrance.

WARNING: To prevent possible SERIOUS INJURY or
DEATH never allow small children near batteries. If battery
is swallowed, immediately notify a doctor.

WARNING: DO NOT mix old and new batteries. DO
NOT mix battery types - such as alkaline, heavy duty, and
rechargeable - in a single device. Battery leakage may occur.

WARNING: DO NOT DISPOSE OF BATTERIES IN FIRE.
BATTERIES MAY EXPLODE OR LEAK.

WARNING: This doorbell requires a low voltage electrical
connection. Do not connect directly to 120V AC.

NOTE: The range of the wireless doorbell can vary with
location, temperature, and battery condition.

This device complies with Part 15 of the FCC Rules and
RSS-210 of Industry Canada. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
The user is cautioned that changes or modications
not expressly approved by the party responsible for
regulatory compliance could void the user’s authority to
operate the equipment.

Warranty

3-YEAR LIMITED WARRANTY
WHAT IS COVERED

This product is guaranteed to be free of factory defective parts and workmanship for a period of 3 years from date
of purchase. Purchase receipt is required for all warranty claims.

WHAT IS NOT COVERED

This warranty does not include expendable items (such as light bulbs, batteries, etc.), repair service, adjustment
and calibration due to misuse, abuse or negligence. Unauthorized service or modication of the product or of any
furnished component will void this warranty in its entirety. This warranty does not include reimbursement for
inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty
is not extended to other equipment and components that a customer uses in conjunction with this product.

Contact the Customer Service Team at 1-844-760-3644 or visit www.hamptonbay.com.

3 HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.

Pre-Installation

PLANNING INSTALLATION

Before installing the doorbell, ensure that all parts are present. Compare parts with the Hardware Included and
Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this

doorbell.
Estimated installation time: 30 minutes

SPECIFICATIONS

Wired Doorbell Installations Wireless Doorbell Installations

Power requirements

16 volt AC, 10 watt or 16 volt AC, 15
watt transformer

3 “C” alkaline batteries (when used as
a wireless doorbell only)

TOOLS REQUIRED

Phillips
screwdriver

Flathead
screwdriver

Drill

Pliers Masking tape Pen

7/32 in.
(5.5 mm) Drill
bit

Wire strippers/cutters

Safety goggles

4

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware shown to actual size.

AA BB

CC

Part Description Quantity

AA Screw 4

BB Wall anchor 4

CC Diode 2

PACKAGE CONTENTS

SYNC – PRESS
AND RELEASE.

RESET – HOLD
10 SECONDS.

C

H

I

M

E

V

O

L

U

M

E

TUNE – HOLD
1 SECOND.

UP

FRONT TRANS REAR

Part Description Quantity

A Doorbell cover 1

B Doorbell base 1

Installation - Wired Doorbell

1

Verifying the transformer
power rating

Power must be supplied from a 16 volt AC, 10 or 15 watt
transformer.

WARNING: This doorbell requires a low voltage electrical
connection. Do not connect directly to 120V AC.

NOTE: DO NOT install batteries if connecting doorbell to
transformer wires.

A

B

5 HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.

Installation - Wired Doorbell

2

Removing the existing doorbell

 Remove the cover from the existing doorbell

and label all wires with masking tape before
disconnecting:

 “F” - Front door push button wire
 “T” - Transformer wire
 “R” - Rear door push button wire (if

applicable)

 Disconnect all wires from existing doorbell and

remove doorbell from mounting surface.

FR

ON

T

REA

R

TRAN

S

R

T

F

3

Mounting the doorbell

 Route the wires through the wire entrance hole

in the doorbell base (B).

 Using the “UP” arrow indicator, place the

doorbell base (B) against the wall and mark
the four screw hole locations.

 Drill four 7/32 in. pilot holes and insert wall

anchors (BB).

 Attach the doorbell base (B) to the mounting

surface using the four screws (AA) and tighten
securely.

SYNC – PRESS
AND RELEASE.

RESET – HOLD
10 SECONDS.

C

H

I

M

E

V

O

L

U

M

E

TUNE – HOLD
1 SECOND.

UP

FRONT TRANS REAR

4

Wiring the doorbell

 Connect the doorbell wires to the doorbell

base (A):

 Wire “F” to screw terminal “FRONT”
 Wire “T” to screw terminal “TRANS”
 Wire “R” to screw terminal “REAR”

 Snap the doorbell cover (A) onto the doorbell

base (B).

FRONT TRANS REAR

F

T

R

5

Installing the diode

NOTE: The doorbell will not play the entire musical
tune and the “TUNE” button will not work if a diode is not
installed on the main push button.

 If a diode (CC) is not already installed on a

push button, loosen the two wiring screws on
the back of the existing push button and wrap
each of the ends of the diode (CC) around each
screw. Tighten the screws onto the diode (CC)
and wiring.

B

B

AA

CC

CC

Installation - Wired Doorbell (continued)

6

Installation - Wireless Doorbell

1

Installing the batteries

NOTICE: When using this doorbell with a transformer, batteries are
not needed and should not be installed even when using wireless
push buttons.

 If the doorbell is not connected to transformer

wires, install 3 alkaline “C” batteries (not
included) into the doorbell base (B). Ensure
batteries are oriented correctly.

NOTE: In typical use, alkaline batteries will last up to
one year.

TYPE “C”

TYPE “C”

TYPE “C”

2

Syncing the doorbell and push
button

 Press and release the “SYNC” button on the

doorbell base (B).
 Press the push button within 30 seconds.
 The doorbell base (B) will play a “Beep-Beep” to

indicate the push button is synced.
 Press and release the push button to verify the

doorbell base (B) and push button are synced.

30

SYNC – PRESS
AND RELEASE.

RESET – HOLD
10 SECONDS.

TUNE – HOLD
1 SECOND.

3

Testing the doorbell and push

button placement

 Temporarily position the doorbell base (B) and

push button where they will be mounted.
 Press the push button and listen for the doorbell

to ring.
 If the doorbell does not sound, move the

doorbell closer to the push button and test

again.

NOTE: Do not permanently mount the push button or
doorbell base (B) until they are working properly.

SYNC – PRESS
AND RELEASE.

RESET – HOLD
10 SECONDS.

C

H

I

M

E

V

O

L

U

M

E

TUNE – HOLD
1 SECOND.

UP

FRONT TRANS REAR

TYPE “C”

TYPE “C”

TYPE “C”

4

Mounting the doorbell base

 Using the “UP” arrow indicator, place the

doorbell base (B) against the wall and mark

the four screw hole locations.
 Drill four 7/32 in. pilot holes and insert wall

anchors (BB).
 Attach the doorbell base (B) to the mounting

surface using the four screws (AA) and tighten

securely.
 Snap the doorbell cover (A) onto the doorbell

base (B).

SYNC – PRESS
AND RELEASE.

RESET – HOLD
10 SECONDS.

C

H

I

M

E

V

O

L

U

M

E

TUNE – HOLD
1 SECOND.

UP

FRONT TRANS REAR

B

B

B

B

AA