HAMPTON BAY 55370 Use And Care Manual

USE AND CARE GUIDE

MAXWELL 52-INCH CEILING FAN

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday.

1-877-527-0313

HAMPTONBAY.COM

THANK YOU

We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Hampton Bay!

Item #610-003 Model #55370

UL Model #52-MH

Table of Contents ................................................................ 2

Safety Information...............................................................2

Warranty...............................................................................3

Pre-Installation ....................................................................3

Installation............................................................................ 5

Assembly.............................................................................. 6

Operation .............................................................................9

Care and Cleaning.............................................................10

Troubleshooting................................................................. 10

1. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualied licensed electrician.

2. The outlet box and support structure must be securely mounted and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet boxes marked “Acceptable for Fan Support of 35 lbs. (15.9 kg) or less.”

3. The fan must be mounted with a minimum of 7 ft (2 m) clearance from the trailing edge of the blades to the oor.

4. Do not place objects in the path of the blades.

5. Electrical diagrams are for reference only. Light kits that are not

packed with the fan must be UL listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.

6. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

7. All setscrews must be checked and retightened where necessary before installation.

WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as anges) during assembly or after installation. Do not insert objects in the path of the blades.

WARNING: To reduce the risk of re or electric shock, do not use this fan with any solid-state speed control device.

WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.

WARNING: Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan.

WARNING: To reduce the risk of re or electric shock, this fan should only be used with fan speed control part no. UC7067RY, manufactured by Rhine Electric Co., LTD.

Safety Information

Table of Contents

CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box.

CAUTION: To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan.

This device complies with part 15 of the FCC rules, operation is subject to the following two conditions. (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modications not expressly

approved by the party responsible for compliance could void the user’s authority to operate the equipment.

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation

Warranty

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part, such as by accident, misuse, improper installation, or by afxing any accessories, is not covered by this warranty. Because of varying climatic conditions, this warranty does not cover any changes in brass nish, including rusting, pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby disclaims any and all warranties, including but not limited to those of merchantability and tness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specied in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specic legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.

SPECIFICATIONS

TOOLS REQUIRED

NOTE: These are approximate measures. They do not

include the amps and wattage used by the light kit.

Phillips screwdriver

Flat blade screwdriver

Adjustable wrench

Electrical tape

Wire cutter

Step ladder

Size Speed Volts Amps Watts RPM CFM

Net

Weight

Gross

Weight

Cube Feet

52 in.

Low

Medium

High

120

0.30

0.39

0.50

14.2

27.2

57.3

150

2449

3529

5395

19.62 lbs. (8.9 kg)

22.7 lbs. (10.3kg)

1.9’

Part Description Quantity

A Mounting plate 1

B Fan-motor assembly

(receiver pre-installed)

C Light kit tter assembly 1

Part Description Quantity

D Glass bowl 1

E Blade 5

F Blade bracket (ange) 5

G Light bulb (40-Watt maximum) 3

H Remote control (battery included) 1

Part Description Quantity

AA Blade attachment screw 16

BB Plastic wire connector 3

CC Blade bracket hardware

(screw and lockwasher)

IMPORTANT: This product and/or components are

governed by one or more of the following U.S. Patents: 5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117 and other patents pending.

Pre-Installation (continued)

PACKAGE CONTENTS

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Installation

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 35lbs. (15.9 Kg) or less” and use screws provided with the outlet box. An outlet box commonly used for the support of lighting xtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualied electrician.

If your ceiling fan does not have an existing UL-listed mounting box, then install one using the following instructions:

Ƒ Disconnect the power by removing the fuses or turning off

the circuit breakers.

Ƒ Secure the outlet box directly to the building structure. Use

the appropriate fasteners and materials. The outlet box and its bracing must be able to fully support the weight of the moving fan (at least 35 lbs.). Do not use a plastic outlet box.

The illustrations below show two different ways to mount the outlet box.

To hang your fan where there is an existing xture but no ceiling joist, you may need an installation hanger bar as shown above

(available at any Home Depot store).

Outlet Box

Hanger Bar

Assembly - Hanging the Fan

Hanging the fan-motor assembly

Setting the remote control codesAttaching the fan to the electrical

box

Ƒ Turn the power off. Ƒ Securely attach the mounting plate (A) to the outlet box (DD)

using the two screws (FF) supplied with the outlet box (DD). Pull the 120-volt supply wires (the black, the white, and the ground wires) out of the outlet box (DD) and through the center hole in the mounting plate (A), and push them to the side.

Ƒ Carefully lift the fan-motor assembly (B) and engage

the hole of the fan-motor assembly (B) with the hook on the mounting plate (A) so that it is securely suspended.

To set the code on the remote control: Ƒ Remove the battery cover by pressing rmly on the

arrow and sliding the cover off.

Ƒ Slide the code switches to your choice of either up

or down. The factory setting is up.

Ƒ Install a 9-V battery (included) into the remote

control (H).

Ƒ Replace the battery cover on the remote control (H).

To set the code on the receiver: Ƒ Slide the code switches to the same position as set

on your remote control (H).

1234

ON DIP

NOTE: For better fan performance, make sure the

mounting plate is level. Additional washers (EE) (not included) may be needed to insert between the outlet box and the mounting plate.

NOTE: The frequencies on your receiver and remote

control have been preset at the factory. The receiver is pre-installed in the fan-motor assembly, make sure the dip switches on the receiver and remote control are set to the same frequency. The dip switches on the remote control are located inside the battery compartment.

NOTE: This remote is equipped with a 16-code

combination. To prevent possible interference from or to other remote units, such as garage door openers, car alarms, or security systems, change the combination code, but be sure that the code on both the hand held transmitter and receiver in the fan are the same.

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Assembly - Hanging the Fan (continued)

Installing the fan-motor assemblyMaking the electrical connections

Ƒ Remove two of the four screws from the mounting

plate (A) that are opposite one another, and loosen the remaining two.

Ƒ Align the two key slots on the top of the fan-motor

assembly (B) with the two screws on the mounting plate (A). Push the fan-motor assembly (B) up and turn it clockwise to lock it onto the mounting plate (A). Tighten the two screws.

Ƒ Install the two screws that were removed at the

beginning of this step into the remaining two holes and tighten the four screws rmly.

Ƒ Connect the ground conductor of the 120-Volt supply (this

may be a bare wire or a wire with green colored insulation) to the green wire (HH) from the mounting plate (A) using a plastic wire connector (BB).

Ƒ Connect the receiver black wire (II) to the black household

supply wire (II) using a plastic wire connector (BB).

Ƒ Connect the receiver white wire (GG) to the white neutral

household wire (GG) using a plastic wire connector (BB).

IMPORTANT: Use the plastic wire connectors (BB) supplied with

your fan. Secure the connectors with electrical tape and ensure there are no loose strands or connections.

WARNING: Each wire connector (BB) supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use.

+ 15 hidden pages

HAMPTON BAY 55370 Use And Care Manual

Specifications and Main Features

Frequently Asked Questions

User Manual