HAMPTON BAY 51332, 52652 Use And Care Manual

USE AND CARE GUIDE

HAYWARD 52-INCH CEILING FAN

Item #142-303
Model #51332
UL Model #52-MNL

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday.

1-877-527-0313

HAMPTONBAY.COM

THANK YOU

We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Hampton Bay!

Table of Contents

Table of Contents ................................................................ 2

Safety Information ............................................................... 2

Warranty ............................................................................... 3

Pre-Installation ....................................................................3

Installation ............................................................................6

Safety Information

1. To reduce the risk of electric shock, ensure the electricity has

been turned off at the circuit breaker or fuse box before you
begin.

2. All wiring must be in accordance with the National Electrical

Code ANSI/NFPA 70-1999 and local electrical codes. Electrical
installation should be performed by a qualied licensed
electrician.

3. The outlet box and support structure must be securely mounted

and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL
Listed outlet boxes marked “Acceptable for Fan Support of 35
lbs. (15.9 kg) or less.”

Assembly .............................................................................. 7

Operation ...........................................................................10

Care and Cleaning ............................................................. 11

Troubleshooting ................................................................. 11

WARNING: To reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
anges) during assembly or after installation. Do not
insert objects in the path of the blades.

WARNING: To reduce the risk of re or electric
shock, do not use this fan with any solid-state speed
control device.

WARNING: To reduce the risk of re, electric shock
or personal injury, mount to outlet box marked
“Acceptable for fan support of 35 lbs. (15.9 kg) or
less”, and use screws provided with the outlet box.

4. The fan must be mounted with a minimum of 7 ft (2 m) clearance

from the trailing edge of the blades to the oor.

5. Do not operate the reversing switch while the fan blades are in

motion. You must turn the fan off and stop the blades before
you reverse the blade direction.

6. Do not place objects in the path of the blades.

7. To avoid personal injury or damage to the fan and other items,

use caution when working around or cleaning the fan.

8. Electrical diagrams are for reference only. Light kits that are not

packed with the fan must be UL listed and marked suitable for
use with the model fan you are installing. Switches must be UL
General Use Switches. Refer to the instructions packaged with
the light kits and switches for proper assembly.

9. After making electrical connections, spliced conductors should

be turned upward and pushed carefully up into the outlet box.
The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the
outlet box.

10. All setscrews must be checked and retightened where

necessary before installation.

WARNING: To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed

electrician.

WARNING: Electrical diagrams are for reference
only. Optional use of any light kit shall be UL-listed
and marked suitable for use with this fan.

CAUTION: To reduce the risk of personal injury,
use only the screws provided with the outlet box.

CAUTION: To avoid personal injury or damage to the fan
and other items, use caution when working around or
cleaning the fan.

2

Warranty

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a life­time after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades,
to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase
by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the
product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling
the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or by afxing any accessories, is
not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass nish, including rusting,
pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their longest useful life when protected from varying weather conditions.
A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the
warranty invalid. There is no other express warranty. Hampton Bay hereby disclaims any and all warranties, including but not limited to those
of merchantability and tness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be
disclaimed is limited to the time period as specied in the express warranty. Some states do not allow a limitation on how long an implied war­ranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising
out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of
incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specic legal rights, and you
may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product
as part of a claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.

Pre-Installation

SPECIFICATIONS

Size Speed Volts Amps Watts RPM CFM

52 in.

Low

Medium

High

NOTE: These are approximate measures. They do not
include the amps and wattage used by the light kit.

120

0.21

0.33

0.50

10.2

25.9

60.1

63

110

171

TOOLS REQUIRED

Phillips
screwdriver

Flat blade
screwdriver

Adjustable
wrench

1624

2957

4915

Net

Weight

20.1 lbs.
(9.1 kg)

Electrical
tape

Gross

Weight

23 lbs.

(10.4 kg)

Cube Feet

1.7’

Wire
cutter

Step ladder

3

Please contact 1-877-527-0313 for further assistance.

HAMPTONBAY.COM

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA BB CC

EE

Part Description Quantity

AA Blade attachment screw 16

BB Locknut 3

CC Plastic wire connector 3

DD

Part Description Quantity

DD Pull chain 2

EE

Extra blade bracket hardware
(screw and lockwasher)

1

4

Pre-Installation (continued)

PACKAGE CONTENTS

A

E

B

C

D

F

G

H

Part Description Quantity

A Mounting plate 1

B Motor housing 1

C Fan-motor assembly 1

D

Blade bracket (ange),
screws pre-installed

IMPORTANT: This product and/or components are
governed by one or more of the following U.S. Patents:
5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117
and other patents pending.

Part Description Quantity

E Blade 5

F Light kit tter assembly 1

G Glass shade 4

5

5

H Light bulbs, 40-Watt maximum 4

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Installation

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock or
personal injury, mount to outlet box marked “Acceptable
for fan support of 35 lbs. (15.9 kg) or less”, and use
screws provided with the outlet box. An outlet box
commonly used for the support of lighting xtures may
not be acceptable for fan support and may need to be
replaced. If in doubt, consult a qualied electrician.

If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:

□ Disconnect the power by removing the fuses or turning off

the circuit breakers.

□ Secure the outlet box directly to the building structure. Use

the appropriate fasteners and materials. The outlet box and
support structure must be securely mounted and capable of
reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet
boxes marked “Acceptable for Fan Support of 35 lbs. (15.9 kg)
or less.” Do not use a plastic outlet box.

The illustrations below show two different ways to mount the
outlet box.

Hanger Bar

Outlet Box

To hang your fan where there is an existing xture but no ceiling joist,
you may need an installation hanger bar as shown above

(available at any Home Depot store).

Outlet Box

Outlet Box

6

Assembly - Hanging the Fan

box

□ Turn the power off.
□ Securely attach the mounting plate (A) to the outlet box (FF)

using the two screws (GG) supplied with the outlet box (FF).
Pull the 120-volt supply wires (the black, white and ground
wires) out of the outlet box (FF) and through the hole in the
mounting plate (A) and lay them to the side.

FF
HH

A

GG

NOTE: For better fan performance, make sure the
mounting plate is level. Additional washers (HH)
(not included) may be needed to insert between
the outlet box and mounting plate.

21

Hanging the fan-motor assemblyAttaching the fan to the electrical

□ Carefully lift the fan-motor assembly (C) and engage

the slot in the motor bracket on the top of the fan­motor assembly (C) with the hook on the mounting
plate (A) so that it is securely suspended. Then
connect the wiring to your fan according to step 3
“Making the Electrical Connections”.

II

□ Once wiring is completed, lift the motor bracket on

the top of the fan-motor assembly (C) so that the
threaded studs (II) on the mounting plate (A) pro­trude through the slot in the motor bracket. Securely
tighten the three locknuts (BB) onto the threaded
studs (II), then try to shake the fan-motor assembly
(C) to ensure that the assembly is tight.

A

C

A

BB

C

7

Please contact 1-877-527-0313 for further assistance.

HAMPTONBAY.COM

Assembly - Hanging the Fan (continued)

FF

WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.

IMPORTANT: Use the plastic wire connectors (CC) supplied
with your fan. Secure the connectors with electrical tape
and ensure there are no loose strands or connections.

□ Connect the green wire (MM) from the motor bracket to the

household wire using a plastic wire connector (CC).

□ Connect the fan motor white wire (LL) to the supply white

(neutral) (LL) wire using a the plastic wire connector (CC).

□ Connect the fan motor black (KK) and blue (JJ) wires to the

supply black (hot) wire (KK) using a plastic wire connector
(CC).

□ Spread the wires apart so that the green (MM) and white (LL)

wires are on one side of the outlet box (FF) and the black wire
(KK) is on the other side.

□ Turn the wire connectors upward and push the wiring into the

outlet box (FF).

43

Completing the fan assemblyMaking the electrical connection

□ Remove the two screws on two diagonal sides from

the top of the mounting plate (A) and loosen the
other two screws.

□ Align the two key slots on the top of the motor

housing (B) with the two screws on the mounting
plate (A). Push the motor housing (B) up and turn it
clockwise to lock in the mounting plate (A). Tighten
the two screws.

□ Install the two screws that were removed in at the

beginning of this step into the remaining two holes
and tighten the four screws rmly.

A

B

C

LL

KK

JJ

LL

KK

MM

8