HAMPTON BAY 493-660 Instruction Manual

Page 1

INSTRUCTION MANUAL

1LT Interior Flushmount

The Home Depot SKU 493-660 (UPC

6940500305844)

Page 2

Thank you for purchasing this Hampton Bay interior flushmount. This
product has been manufactured with the highest standards of safety and
quality.

FEATURES:

1. One-light interior flushmount in highland bronze finish with scavo glass.

2. This fixture has been engineered to safely use a 100 watt medium base

incandescent light bulb (do not exceed 100 watts) (not included).

3. For energy savings, this fixture has been engineered to safely use a

standard base compact fluorescent light bulb (for equivalent light output,
do not exceed 26 watts) (not included).

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local The Home Depot, please call our Customer
Service Team at 800-668-2266 or visit www.homedepot.ca. Please reference
your SKU 493-660 or UPC 6940500305844

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous fixture,

disconnect the power by turning off the circuit breaker or by removing the
fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS.

3. If you have any non-electrical questions about this fixture, please contact
our Customer Service Team at 800-668-2266 or visit www.homedepot.ca.
Please reference your SKU 493-660 or UPC 6940500305844

4. Keep your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):

Light Bulb Safety Goggles Ladder Gloves Wire Strippers

(100 watt maximum)
(or CFL equivalent)

Flathead Screwdriver Phillips Screwdriver Electrical Tape Wire Cutters

Page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1ea Hex Nut (#5) 1ea Nipple (#6) 1ea Shade (#7)

1ea Bottom Cover (#8) 1ea Finial (#9)

ASSEMBLY INSTRUCTIONS:

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Unscrew the Finial (#9) from the Nipple (#6). Screw the Nipple (#6) onto
the Bushing (#2) using the Hex Nut (#5) as a guide.

3. Before continuing Assembly, please proceed to the Installation Instructions.

4. Install a 100 watt medium base incandescent light Bulb (#4) (not included)
or an equivalent standard base compact fluorescent light bulb (not included)
in the Socket (#3) in the fixture.

5. Place the Shade (#7) and the Bottom Cover (#8) over the Nipple (#6).
Screw the Finial (#9) onto the Nipple (#6) to secure the Shade (#7).

Page 5

ASSEMBLY:

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

3ea Wi re Connectors (#1 1)

2ea Outlet Box Screws (#12) 2ea Mounting Screws (#13)

1ea Mounting Strap (#14) 1ea Ground Screw (#15)

INSTALLATION INSTRUCTIONS:

1. Screw the two Mounting Screws (#13) into the Mounting Strap (#14). Mount the

Mounting Strap (#14) to the Outlet Box (#10) using the two Outlet Box Screws
(#12). [Make s ure the heads o f the Mounting Screws (#13) are facing outside when
the Mounting Strap (#14) is attached to the Outlet Box (#10).]

2. Wrap the ground wire from the fixture around the Ground Screw (#15) on the

Mounting Strap (#14), and then connect the ground wire from the fixture to the
ground wire from the Outlet Box (#10). Connect the white wire from the fixture to
the white wire (neutral wire) from the Outlet Box (#10). Connect the black wire
from the fixture to the black wire (live wire) from the Outlet Box (#10). Cover the
three connections using the three Wire Connectors (#11). Wrap the three wire
connections with electrical tape for a more secure connection. Position the wires
back inside the Outlet Box (#10). Note: If you have electrical questions, consult
your local electrical code for approved grounding methods.

3. Place the Canopy (#1) over the Outlet Box (#10). Allow the heads of the Mounting

Screws (#13) to come out through the large ends of the keyholes on the Canopy
(#1). Twist the Canopy (#1) clockwise until the heads of the Mounting Screws (#13)
slide into the narrow ends of the keyholes. Tighten the Mounting Screws (#13) to
secure the Canopy (#1).

4. Before completing Installation, please return to Assembly Instruction #4.

5. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn

the light switch on to activate the fixture.

Page 7

INSTALLATION:

Page 8

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To cl ean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the glass and surface of the fixture.

2. To clean the inside of the fi xture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly
dampened clean cloth (use clean water, never a solvent) to wipe the inside glass and
interior surface of the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period
of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only
to products used in normal use and service. If this product is found to be defective, the manufacturer’s only
obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s
discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,
alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been
improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product.
This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,
alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This
warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is
considered normal wear and tear. The manufac turer does not warrant and specially discl aims any wa rranty,

whether express or implied, of fitness for a particular purpose, other than the warranty containe d herein.
The manufacturer specifically disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor / expense costs involved in the
replacement or repair of said product.

Problem Possible Cause Corrective Action

1. Light bulb is burned out. 1. Replace light bulb.

2. Power is off. 2. Make sure power
supply is on.

3. Faulty wire connection. 3. Check wiring.

Light bulb will not
illuminate.

4. Faulty switch. 4. Test or replace switch.

Fuse blows or circuit
breaker trips when light
bulb is illuminated.

Crossed wires or power wire
is grounding out.

Check wire connections.