HAMPTON BAY 420-420 User Manual

Hampton Bay Lifetime Limited Warranty

The retailer warrants the fan motor to be free from defects in workmanship and material
present at time of shipment from the factory for a lifetime after the date of purchase by the
original purchaser. The retailer also warrants that all other fan parts, excluding any glass or
plexiglass blades, to be free from defects in workmanship and material at the time of
shipment from the factory for a period of one year after the date of purchase by the original
purchaser. We agree to correct such defects without charge or at our option replace with a
comparable or superior model if the product is returned to the retailer. To obtain warranty
service, you must present a copy of the receipt as proof of purchase. All costs of removing
and reinstalling the product are your responsibility. Damage to any part such as by accident
or misuse or improper installation or by affixing any accessories, is not covered by this
warranty. Because of varying climatic conditions in the United States this warranty does not
cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling.
Brass finishes of this type give their longest useful life when protected from varying weather
conditions. A certain amount of wobble is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no

other express warranty. The retailer hereby disclaims any and all warranties,
including but not limited to. Those of merchantability and fitness for a particular
purpose to the extent permitted by law. The duration of any implied warranty which

cannot be disclaimed is limited to the time period as specified in the express warranty. Some
states do not allow limitation on how long an implied warranty lasts, so the above limitation
may not apply to you. The retailer shall not be liable for incidental, consequential, or

special damages arising out of or in connection with product use or performance except
as may otherwise be accorded by law. Some states do not allow the exclusion of incidental

or consequential damages, so the above exclusion or limitation may not apply to you. This
warranty gives specific legal rights, and you may also have other rights which vary from
state to state. This warranty supersedes all prior warranties.

Lifetime Limited Warranty

Date Purchased

Store Purchased

Model No.

Serial No.

Vendor No.

UPC

420-420

14826

792145351009

Safety Rules.....................................................................................................................................

Unpacking Your Fan .........................................................................................................................

Installing Your Fan ...........................................................................................................................

Installing Your Light kit....................................................................................................................

Care of Your Fan ..........................................................................................................................

Troubleshooting ............................................................................................................................

Specifications ...............................................................................................................................

1.

2.

3.

9.

10.

11.

12.

Table of Contents

1. Safety Rules

1. To reduce the risk of electric shock, insure electricity has been turned
off at the circuit breaker or fuse box before beginning.

2. All wiring must be in accordance with the National Electrical Code
and local electrical codes. Electrical installation should be
performed by a qualified licensed electrician.

3. WARNING: To reduce the risk of electrical shock and fire, do not
use this fan with any solid-state fan speed control device.

4. WARNING: To reduce the risk of personal injury, use only the two

steel screws (and lock washers) provided with the fan. Most outlet
boxes commonly used for the support of lighting fixtures are not
acceptable for fan support and may need to be replaced, consult a
qualified electrician if in doubt.

8. Avoid placing objects in the path of the blades.

9. To avoid personal injury or damage to the fan and other items, be

cautious when working around or cleaning the fan.

10. Do not use water or detergents when cleaning the fan or fan blades. A
dry dust cloth or lightly dampened cloth will be suitable for most
cleaning.

11. After making electrical connections, spliced conductors should be
turned upward and pushed carefully up into outlet box. The wires
should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box.

12. Electrical diagrams are reference only. Light kits that are not packed
with the fan must be CUL Listed and marked suitable for use with the
model fan you are installing. Switches must be CUL General Use
Switches. Refer to the Instructions packaged with the light kits and
switches for proper assembly.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL

INJURY, MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE

FOR FAN SUPPORT.

5. The outlet box and support structure must be securely mounted and
capable of reliably supporting a minimum of 50 pounds. Use only
CUL Listed outlet boxes marked FOR FAN SUPPORT.

6. The fan must be mounted with a minimum of 7 feet clearance from the
trailing edge of the blades to the floor.

7. Do not operate the reverse switch while fan blades are in motion. Fan
must be turned off and blades stopped before reversing blade
direction.

WARNING

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE ARMS (ALSO REFERRED TO AS BRACKETS) DURING

ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT OBJECTS IN

THE PATH OF THE BLADES.

NOTE

READ AND SAVE ALL INSTRUCTIONS!

Unpack your fan and check the contents. You should have the following items;

.

1. Fan blades (5)

2. Canopy assembly

3.

4. Coupling cover

5. Fan motor assembly

6. Blade arms (5)

Ball/downrod assembly

7. Mounting plate

8. Light kit

9. Glass shades

10.

11. Balancing kit

(4)

Pull chain and fob (2)

1

2

3

5

4

7

8

9

10

11

6

WARNING

DO NOT INSTALL OR USE FAN

IF ANY PART IS DAMAGED OR MISSING.

CALL TOLL FREE 1-877-902-5588

Unpacking Your Fan 2.

NOTE

FOR NON-LIGHT USE PURPOSE, THE

SWITCH BOX IS AVAILABLE BY CALLING

THE TOLL FREE NUMBER 1-877-902-5588

12. Loose parts bag containing:
a. Mounting hardware

Screws (2 PCs. )
Lock washers (2 PCs.)
Metal washers (2 PCs.)
Plastic wire connectors (3 PCs.)
b. Blade attachment hardware
(16 screws)

12

a

b

3. Installing Your Fan

Tools Required

Phillips screwdriver, straight slot
screwdriver, adjustable wrench, step ladder,
and wire cutters.

Mounting Options

If there isn't an existing CUL listed
mounting box, then read the following
instructions. Disconnect the power by
removing fuses or turning off circuit
breakers.

Secure the outlet box directly to the
building structure. Use appropriate
fasteners and building materials. The outlet
box and its support must be able to fully
support the moving weight of the fan (at
least 50 lbs). Do not use plastic outlet
boxes.

Figures 1,2 and 3 are examples of different
ways to mount the outlet box.

Note: You may need a longer downrod to
maintain proper blade clearance when
installing on a steep, sloped ceiling.

To hang your fan where there is an existing
fixture but no ceiling joist, you may need an
installation hanger bar as shown in Figure 4
(available at your Hampton Bay Retailer).

Outlet box

Outlet box

Provide strong
support

Recessed
outlet box

Mounting bracket
opening must be
toward the top

Ou

tl

e

t b

ox

Figure 1 Figure 3

Figure 2

Figure 4

Angled ceiling
maximum
20 angle