HAMPTON BAY 299-440 Instruction Manual

Page 1
INSTRUCTION MANUAL
5 Arm Multicolor Floor Lamp
(UPC 798919081295)
Page 2
Thank you for purchasing this Hampton Bay interior portable luminaire. This product has been manufactured to the highest standards of safety and quality. The durable finish and shade design provide for care-free maintenance.
FEATURES:
1. Five gooseneck arms allow for maximum light direction. Colorful shades add to the design.
2. Lamp holder may be fitted with a CFL equivalent energy-saving bulb(s).
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or visit
www.homedepot.com. Please reference your SKU
299-440(UPC 798919081295) 5 Arm Multicolor Floor Lamp when speaking to a Customer Service agent.
CAUTION:
1. Before starting to assemble your portable luminaire, spread all parts out on a clean flat surface. Inspect each part for defects that may have occurred during shipping. Be careful when unpacking the lamp since the wires are connected. If the wires are pulled out of their connectors, it may result in a bad connection.
Page 3
Important: Inspect the wire insulation for any cuts, abrasions or exposed copper that may have resulted during shipping. If there is a defect in the wire, DO NOT continue the assembly operation. Please call our Customer Service Team at 1-877-527-0313.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
3. Keep your receipt and these Instructions for Proof of Purchase.
4. This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug. CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 ea –Base
(A)
4 ea – Pole
(B-E)
1 ea –
Junction
Box (F)
5 ea-Shades
(H)
5 ea –Ring
(I)
Page 5
ASSEMBLY INSTRUCTIONS:
1. Begin assembly at the bottom of the lamp.
2. Insert lamp pole (B) into base (A) and turn
clockwise to tighten.
3. Insert lamp pole (C) into lamp pole (B) and turn
clockwise to tighten.
4. Insert lamp pole (D) into lamp pole (C) and turn
clockwise to tighten.
5. Insert lamp pole (E) into lamp pole (D) and turn
clockwise to tighten.
6. Insert the junction box (F) into lamp pole (E) and
turn clockwise to tighten.
7. Remove socket ring (I) from lamp holder (G)
counter-clockwise.
8. Put lamp shade (H) onto lamp holder (G) and turn
the socket ring (I) clockwise to tighten.
9. Repeat steps 8 and 9 with the other shades.
10. Use with (5) 40W maximum candelabra bulbs or 13W maximum E12 CFL bulbs (bulbs not included).
Page 6
TROUBLESHOOTING:
PRODUCT MAINTENANCE:
1. To clean simply wipe with a soft dry cloth.
2. Do not use any cleaners with chemicals, solvents or harsh abrasives.
Possible Cause
Corrective Action
Bulb will not light.
1. Bulb is burned out.
1. Replace light bulb.
2. Power is off.
2. Make sure power supply is on.
3. Cord not plugged in.
3. Make sure cord is plugged into the outlet.
4. Circuit breaker off.
4. Make sure circuit breaker is to the „on‟ position.
Fuse blows or circuit breaker trips when light is turned on.
1. Exposed wire
1. Discontinue use. Unplug unit from the wall and contact a qualified electrician or call the Home Depot Customer Service Team at 1-877-527-0313.
Page 7
LIMITED WARRANTY
The manufacturer warrants this portable luminaire to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the
manufacturer‟s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer‟s
discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, setup, or used in any way not in accordance with the instruction supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The
manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Page 8
Loading...
+ 16 hidden pages