HAMPTON BAY 240-235, 240-236 Instruction Manual

INSTRUCTIONS MANUAL

EXTERIOR LIGHT FIXTURE

HOME DEPOT SKU# 240-235 (UPC# 046335840379)

Page 1

Thank you for purchasing this Hampton Bay Exterior Light Fixture. This
product has been manufactured with the highest standards of safety and
quality.

FEATURES:

1. Easy to install.

2. Handsome Black finish with Frosted Ribbed glass.

3. Solid cast aluminum resists elements.

4. For energy savings this fixture has been engineered to safely use a
Self Ballasted Compact Fluorescent Lamp in place of an incandescent
lamp.

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our Customer
Service Team at 1-877-527-0313 or visit www.homedepot.com. Please
reference your SKU (240-235) or UPC (046335840379).

Page 2

CAUTION:

1. Before starting installation of this fixture or removal of a previous
fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS. If you have any non-electrical
questions about this fixture, please call our Customer Service Team at
1-877-527-0313 or visit www.homedepot.com. Please reference your
SKU (240-235) or UPC (046335840379).

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY
(not included):

Phillips

screwdriver

Light Bulb (60

watt maximum or

CFL equivalent)

Flathead

screwdriver

Safety

goggles

Wire

cutters

Electrical

tape

Wire

strippers

Page 3

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1 ea Fixture Pan (#1) 1 ea Cage (#2)

2 ea Cage Screws (#19)

1 ea Diffuser (#18)

ASSEMBLY INSTRUCTIONS:

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Before continuing Assembly, please proceed to the Installation Instructions.

3. Install an incandescent Light Bulb (#17) or a Listed SBCFL (Self-Ballasted Compact
Fluorescent Lamp [not provided]) into the socket of the Fixture Pan (#1). Do not exceed a
60 watt incandescent light bulb, or a 14 watt SBCFL.

4. Slide the the Diffuser (#18) into the Cage (#2).

5. Secure the Cage (#2) onto the Fixture Pan (#1), using the Cage Screws (#19).

Page 4

ASSEMBLY:

1. Fixture
Pan

17. Light
Bulb

18. Diffuser

2. Cage

19. Cage
Screws

Page 5

PARTS INCLUDED FOR INSTALLATION (parts are not to
scale):

1 ea Mounting

Bracket (#7)

2 ea Hex
Nuts (#9)

2 ea Bracket Mounting

Screws (#8)

1 ea Nipple (#6)

2 ea Lock

Nuts (#3)

3 ea Wire

Nuts (#14)

INSTALLATION INSTRUCTIONS:

1. Thread the Hex Nut (#9) onto the Nipple (#6). Thread the Nipple (#6) into the center hole of the
Mounting Bracket (#7). Do not tighten the Hex Nut (#9) at this time.

2. Pull the power supply wires out from the Outlet Box (#4), and mount the Mounting Bracket (#7) to the
Outlet Box (#4), using the Bracket Mounting Screws (#8).

3. Attach the Black Supply Wire (#5) to the Black Fixture Wire (#12) and the White Supply Wire (#16) to
the White Fixture Wire (#13) using Wire Nuts (#14). Connect the Fixture Ground Wire (#11) and the
Supply Ground Wire (#15) together using a Wire Nut (#14). Wrap all wire connections with electrical
tape for a more secure connection. Note: If you have electrical questions, consult your local electrical

code for approved grounding methods.

4. Carefully tuck all Wires and Wire Nuts (#14) into the Outlet Box (#4). Place the Fixture Pan (#1) over
the Outlet Box (#4), flush against the wall surface, making sure the Nipple (#6) feeds through the hole of
the Fixture Pan (#1). Adjust the Nipple (#6) so that it protrudes about ¼ inch from the surface of the
Fixture Pan (#1). Remover the Fixture Pan (#1) from the wall and tighten the Hex Nut (#9) against the
Mounting Bracket (#7). Replace the Fixture Pan (#1) over the Outlet Box (#4) and thread the Lock Nut
(#3) onto the Nipple (#6) to secure the Fixture Pan (#1) against the wall.

5. Proceed back to the Assembly Instructions.

6. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch on to
activate the fixture.

Page 6

INSTALLATION:

4. Outlet Box

16. White Supply Wire

7. Mounting Bracket

9. Hex Nut

8. Bracket Mounting Screw

13. White Fixture Wire 11. Fixture Ground Wire

1. Fixture
Pan

5. Black Supply Wire

15. Supply Ground Wire

14. Wire Nut

6. Nipple

12. Black Fixture Wire

3. Lock Nut

Page 7

TROUBLESHOOTING:

Possible Cause Corrective Action

Light will not turn on.

1. Power is off. 1. Make sure power supp ly is on.

2. Faulty switch. 2. Test or replace switch.

3. Faulty wire connection. 3. Check wiring.

Fuse blows or circuit breaker
trips when light is turned on.

1. Crossed wires or power wire is grounding
out.

1. Check wire connections.

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean
water, never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the
circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly
dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the
fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft
cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a
period of three (3) years from date of purchase. This warranty applies only to the original consumer
purchaser and only to products used in normal use and service. If this product is found to be defective, the
manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of of the product at
the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product
that is found to have been improperly installed, set-up, or used in any way not in accordance with the
instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of
an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to
faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product,
such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not

warrant and specially disclaims any warranty, whether expressed or implied, of fitness for a
particular purpose, other than the warranty contained herein. The manufacturer specifically
disclaims any liability and shall not be liable for any consequential or incidental loss or damage,
including but not limited to any labor/expense costs involved in the replacement or repair of said
product.

Page 8